2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT
2 layers45.7 × 54.6 mm
Nemesis Mod
jeff-winn/stryfe-modJust a little project to mod a Nerf blaster with Arduino compatible hardware and Bluetooth support.
- Size
- 45.7 × 54.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 40
- Pads
- 71
- Tracks, vias
- 120, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Dec 2024
- Updated
- 8 Dec 2024
Overview
Nemesis Mod is an open-source printed circuit board by jeff-winn, from the jeff-winn/stryfe-mod repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.7 × 54.6 mm with 6 parts on 40 nets, routed with 120 tracks and 0 vias.
Its parts include 1 resistor, 1 IC, 1 connector and 1 switch. It belongs with the radio and wireless and microcontroller boards boards and the nRF52 and nRF5x boards of this library.
README
README.mdStryfe Mod
This project aims to bring Arduino hardware into the Nerf Stryfe (or any pusher based semi-automatic) blaster platform.
Setting up your environment
Because this project requires the use of symbolic links, you will need to use the command line to clone the repository. Visual Studio Code can do it, but it does not permit symbolic links by default.
git clone -c core.symlinks=true Hardware Requirements
These are the boards and hardware being used by the project:
- Adafruit Feather M4 Express - Mainboard sketch
- Adafruit Micro SD SPI or SDIO Card Breakout Board
- Tactile Button Switch (6mm square, 5mm tall)
- Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
- Pololu G2 High-Power Motor Driver 18v17
- Pololu 5V, 500mA Step-Down Voltage Regulator
Optional Hardware
- Adafruit Feather nRF52840 Express - Bluetooth sketch
Bluetooth Support
If you wish to use the Bluetooth connectivity included with this device, please see the Wiki page.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | H1 | |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1 |
| 1 | Adafruit_Feather_M4_Express | Adafruit:Adafruit_Feather_M4_Express | MCU1 |
| 1 | Adafruit_MicroSD_SPI_Breakout | Adafruit:Adafruit_MicroSD_Breakout | U1 |
| 1 | Pololu_5V_Step_Down_Regulator | Pololu:5V_Step_Down_Regulator_500mA | P1 |
| 1 | SW1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Nemesis Mod PCB?
It measures 45.7 × 54.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nemesis Mod use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nemesis Mod KiCad files?
From the jeff-winn/stryfe-mod repository on GitHub, at the commit this page was made from: the board is kicad/Nemesis-Mod.kicad_pcb and its schematic kicad/Nemesis-Mod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nemesis Mod design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14.6 × 33 mm
- 2 layers9 × 9 mm
Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm
MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm
Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm
Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm
L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm
