JEAPI-DEV/Project_PentaStopwatchy is an open-source printed circuit board by JEAPI-DEV, from the JEAPI-DEV/Project_Penta repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 70 × 97 mm with 82 parts on 88 nets, routed with 1,160 tracks and 122 vias.
It is built around the W25Q128JVSIQ, TF-01A and NHD-2.4-240320CF-BSXV-F, with the RT9080-33GJ5, PMEG2020EH and ABM8-272-T3 among its other parts. Its parts include 32 resistors, 22 capacitors, 5 ICs, 4 switches and 3 connectors. It belongs with the RP2350 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C10, C16, C18 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R12, R13, R15, R16 |
| 4 | 0 | PCM_4ms_Resistor:R_0805_2012Metric | R17, R18, R19, R32 |
| 4 | 10uF_0603_10V | PCM_4ms_Capacitor:C_0603 | C17, C19, C20, C21 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R14, R28, R29, R30 |
| 4 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C9, C11, C12, C13 |
| 3 | 10k_0402 | Resistor_SMD:R_0402_1005Metric | R25, R27, R31 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7, R8 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R10 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R21, R23 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R20, R22 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | PMEG2020EH | Diode_SMD:D_SOD-123F | D1, D3 |
| 1 | 220R_0603 | PCM_4ms_Resistor:R_0603 | R24 |
| 1 | 2k_0603 | PCM_4ms_Resistor:R_0603 | R26 |
| 1 | 3.3u | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | APS6404L-3SQR-SN | APS6404L-3SQR-SN:APS6404L-3SQR-SN_APY | PSRAM |
| 1 | BOOT | common:SHOU HAN TS24CA | BOOT |
| 1 | BTN_1 | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | BTN_2 | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | BTN_3 | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | BTN_4 | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | Buzzer_5V | common:Speaker_MLT-8530 | BZ1 |
| 1 | C_1806 | PCM_Capacitor_SMD_AKL:C_1806_4516Metric | C22 |
| 1 | DMG3415U | PCM_4ms_Package_SOT:SOT-23 | Q1 |
| 1 | MCP73831-2-MC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U7 |
| 1 | NHD-2.4-240320CF-BSXV-F | stopwatchy_library:NHD-2.4-240320CF-BSXV-F | U3 |
| 1 | PINHD_1x4_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J2 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | RESET | common:SHOU HAN TS24CA | RST |
| 1 | RP2350A-QFN60 | RP2350_KiCad-main:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mm | U4 |
| 1 | RT9080-33GJ5 | RT9080-33GJ5:TSOT-23-5_RIT | U6 |
| 1 | Red_100mcd_0603 | LED_SMD:LED_0603_1608Metric | CH |
| 1 | TF-01A | TF-01A:TF-01A | MICRO_SD1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Volume | PCM_SL_Devices:potentiometer_3362P | R11 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | ~ | common:joystick-ytlyv13s | ytlyv13s-joystick1 |
The 78 most common of 82 parts.
It measures 70 × 97 mm and has 4 copper layers, 1.6 mm thick.
82 parts, built around the W25Q128JVSIQ, TF-01A, NHD-2.4-240320CF-BSXV-F and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JEAPI-DEV/Project_Penta repository on GitHub, at the commit this page was made from: the board is stopwatchy.kicad_pcb and its schematic stopwatchy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
sini6a/stm32-pocket-console
STM32 Pocket Game/Dev Console 🕹️ is a handheld device powered by 2xAAA batteries. It features 5 programmable buttons, 2 LEDs, and an SPI TFT 2.4" display with a resolution of 320x240 pixels.
vk-sahni/M.2_IMU_sensor_module
KiCad design for an M.2 Key A RP2350B sensor module featuring an MPU-9250 IMU and BME280, intended for UAV and ArduPilot integration experiments.
danindiana/zemizdat
This folder holds the complete electronic CAD for the ZB-1 development board:
