4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers104.1 × 64.5 mm
Psiboard
jbmorley/psiboard12Psion Series 5 based bluetooth keyboard
- Size
- 104.1 × 64.5 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 11
- Nets
- 30
- Pads
- 66
- Tracks, vias
- 169, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Feb 2018
- Updated
- 29 Sep 2026
Overview
Psiboard is an open-source printed circuit board by jbmorley, from the jbmorley/psiboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 104.1 × 64.5 mm with 11 parts on 30 nets, routed with 169 tracks and 4 vias.
It is built around the 1N4148W. Its parts include 6 diodes and 2 connectors. It belongs with the keyboards and input and radio and wireless boards and the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdPsiBoard
Psion Series 5 based bluetooth keyboard.
BOM
FFC Connector
https://www.digikey.com/en/products/detail/molex/0524372271/3262899
22 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle
Reset Switch
https://www.digikey.com/en/products/detail/panasonic-electronic-components/EVQ-P7A01P/4429447
Development
Useful Links
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_2.0x2.0mm | J2 |
| 1 | BAT- | TestPoint:TestPoint_Pad_2.0x2.0mm | J3 |
| 1 | Conn_01x22 | 22-pin molex:CON_524352271_MOL | KEYBOARD1 |
| 1 | EVQ-P7A01P | EVQ-P7A01P:SW_EVQ-P7A01P | RESET1 |
| 1 | nice!nano | Library:nice!nano | NICENANO1 |
Questions
How big is the Psiboard PCB?
It measures 104.1 × 64.5 mm and has 2 copper layers, 1.69 mm thick.
What parts does the Psiboard use?
11 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Psiboard KiCad files?
From the jbmorley/psiboard repository on GitHub, at the commit this page was made from: the board is pcb/psiboard.kicad_pcb and its schematic pcb/psiboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Psiboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
