2 layers78.1 × 61 mm
2 layers17.5 × 13.7 mm
USB C BREAKOUT
jay94ks/elecdevMy own custom development boards
- Size
- 17.5 × 13.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 10
- Pads
- 36
- Tracks, vias
- 110, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Nov 2023
- Updated
- 8 Sep 2024
Overview
USB C BREAKOUT is an open-source printed circuit board by jay94ks, from the jay94ks/elecdev repository on GitHub, published under the MIT licence. It is a 2-layer board of 17.5 × 13.7 mm with 7 parts on 10 nets, routed with 110 tracks and 38 vias.
It is built around the 1N5819WS. Its parts include 3 resistors, 2 connectors, 1 capacitor and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1README
stm32/g030f6/README.mdSTM32 G030F6Px
ARM® Cortex®-M0, 32bit, TSOC-20.
Features: 64 MHz MAX, 32K Flash, 8K RAM, USART, SPI, I2C.
Board Size: 17.78 mm * 25.4 mm.
Price: about 2,800 KRW, 2.11 USD.
Gerber files.
Download: https://github.com/jay94ks/elecdev/blob/main/stm32/g030f6/STM32G030F6P6_v1.zip
Schematic.
Board Rendering.
Artwork.
Top side
Bottom side
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | USB_C_REC_16PIN | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | USB_OUT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
Questions
How big is the USB C BREAKOUT PCB?
It measures 17.5 × 13.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB C BREAKOUT use?
7 parts, built around the 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB C BREAKOUT KiCad files?
From the jay94ks/elecdev repository on GitHub, at the commit this page was made from: the board is misc/USB_C_BREAKOUT/USB_C_BREAKOUT.kicad_pcb and its schematic misc/USB_C_BREAKOUT/USB_C_BREAKOUT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB C BREAKOUT design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from jay94ks/elecdev
9- 2 layers40.6 × 51 mm
- 2 layers22.9 × 28.9 mm
- 2 layers22.9 × 25.5 mm
- 2 layers17.8 × 25.4 mm
- 2 layers22.8 × 41.4 mm
- 2 layers22.9 × 38.2 mm
- 2 layers18.2 × 25.5 mm
- 2 layers18.2 × 25.4 mm
Similar boards
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 6 layers55 × 95 mm
- 4 layers37.1 × 37.2 mm
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0 - 2 layers35.9 × 62.7 mm
Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 6 layers83.5 × 56 mm
- 6 layers90 × 153 mm
Blackpants
o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.
300 parts189MIT - 2 layers53 × 53 mm
Hair electrolysis machine
zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
83 parts168CERN-OHL-P-2.0