Skip to the content
2 layers149.7 × 99.7 mmPcd, the printed circuit board in 3D

KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.

Size
149.7 × 99.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
14
Pads
44
Tracks, vias
128, 12
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Jul 2025
Updated
31 Jul 2025

Overview

Pcd is an open-source printed circuit board by JaVD054, from the JaVD054/PUC_project_pcb repository on GitHub. It is a 2-layer board of 149.7 × 99.7 mm with 14 parts on 14 nets, routed with 128 tracks and 12 vias.

It is built around the STGP7NC60HD. Its parts include 6 transistors, 4 connectors, 2 capacitors, 1 resistor and 1 inductor.

Main components

1

README

README.md

KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.

Parts

14
QtyValueFootprintReferences
6STGP7NC60HDPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2, Q3, Q4, Q5, Q6
3Screw_Terminal_01x02TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_HorizontalJ2, J3, J4
2CCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2
1Conn_01x12_SocketConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalJ1
1LInductor_THT:L_Axial_L16.0mm_D7.5mm_P5.08mm_Vertical_Fastron_XHBCCL1
1RResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1

More from JaVD054/PUC_project_pcb

1
  • 2 layers149.7 × 99.7 mmOptocoupler, the printed circuit board in 3D

    Optocoupler

    JaVD054/PUC_project_pcb

    KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.

    34 parts

Similar boards

  • 2 layers85.3 × 50.3 mmBeef bridge, the printed circuit board in 3D

    Beef bridge

    anuejn/beef_bridge

    An IGBT-half-bridge-board

    36 parts1
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0

Questions

How big is the Pcd PCB?

It measures 149.7 × 99.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcd use?

14 parts, built around the STGP7NC60HD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcd KiCad files?

From the JaVD054/PUC_project_pcb repository on GitHub, at the commit this page was made from: the board is pcd.kicad_pcb and its schematic optocoupler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcd design in my own project?

Its repository states no licence, so its author keeps all rights: ask JaVD054 before reusing the design.