2 layers85.3 × 50.3 mm
2 layers
FHB DPT Labboard
blubbsy/FHB_DPT_Labboard- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 25
- Pads
- 37
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Jul 2024
- Updated
- 15 Jul 2024
Overview
FHB DPT Labboard is an open-source printed circuit board by blubbsy, from the blubbsy/FHB_DPT_Labboard repository on GitHub. It is a 2-layer board with 8 parts on 25 nets.
It is built around the STGP7NC60HD, PMEG3020EH and US1J. Its parts include 3 diodes, 2 connectors, 1 IC and 1 transistor.
Main components
3
STGP7NC60HD
TO-220-55℃~+150℃@(Tj) 115uJ 17pF 18.5ns 2.5V@7A,15V 25A 3.75V@0.25mA 35nC 37ns 600V 720pF 72ns 80W 81pF 95uJ TO-220 IGBT Transistors / Modules ROHSSTMicroelectronicsIGBT Transistors / Modules
PMEG3020EH
SOD-123F1 Independent 1mA@30V 2A 30V 620mV@2A 9A SOD-123F Schottky Diodes ROHSNexperiaSchottky Diodes
US1J
DO-214AC(SMA)-65℃~+150℃ 1.7V@1A 1A 30A 5uA@600V 600V 75ns DO-214AC(SMA) Fast Recovery / High Efficiency Diodes ROHSGuangdong HottechFast Recovery / High Efficiency Diodes
README
README.mdFHB_DPT_Labboard
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | PMEG3020EH | Diode_SMD:D_SOD-123F | D2, D3 |
| 1 | Conn_01x06 | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | J1 |
| 1 | Conn_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal | J2 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | JP1 |
| 1 | L6491 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | STGP7NC60HD | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | US1J | Diode_SMD:D_SMA | D1 |
Similar boards
- 2 layers149.7 × 99.7 mm
Pcd
JaVD054/PUC_project_pcb
KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.
14 parts - 2 layers75.9 × 72.4 mm
OpenDTU
plewka/ESP-Solar_OpenDTU
PCB for OpenDTU in Cable Branchbox, LineSupply w. Fuses, RS485/RS232-Olimex, Relais, DS2485 OneWire, I2C-Header...
46 parts4GPL-3.0 - 4 layers140 × 300 mm
LLC DCDC V5
BOAB235/Design_of_1200W_LLC_DCDC
In battery electric vehicles (BEVs) and 48 V mild-hybrid architectures, a high-voltage DC-DC converter steps the 300–400 V traction battery bus down to the 48 V auxiliary rail that powers lighting, HVAC blowers…
212 parts1 - 2 layers64 × 78 mm
Actuator board
ieb/autopilot
An ML Autopilot designed and written almost entirely by Google AntiGravity.
37 parts - 2 layers85.1 × 40 mm
Esp32c flowsensor
ieb/FlowSensor
Temperature Dispersion Flow Sensor for Raw Water Cooled marine engines.
36 parts - 2 layers94.8 × 57.5 mm
HVGene
Teille98/HVGene-OpenHardware
Open-source, digitally controlled high-voltage AC power supply for cold atmospheric plasma (CAP) research, developed with a specific focus on flexible-endoscope decontamination applications.
33 parts - 2 layers81 × 34 mm
RML HVI
LSUTigerRacing/Electronics
This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.
49 parts8
Questions
What parts does the FHB DPT Labboard use?
8 parts, built around the STGP7NC60HD, PMEG3020EH and US1J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FHB DPT Labboard KiCad files?
From the blubbsy/FHB_DPT_Labboard repository on GitHub, at the commit this page was made from: the board is FHB_DPT_Labboard.kicad_pcb and its schematic FHB_DPT_Labboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FHB DPT Labboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask blubbsy before reusing the design.