2 layers32 × 150 mm
Led tube
janekc/led-tube
It should run with 4 x 18650 lithium battery cells, that can be recharged through USB Power Delivery 3.0 with up to 18W.
65 partsCERN-OHL-P-2.0
4 layers50 × 168 mm
TIDA PowerPack
janekc/TIDA-PowerPack1- Size
- 50 × 168 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 87
- Pads
- 464
- Tracks, vias
- 594, 1,151
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Apr 2025
- Updated
- 8 Apr 2025
Overview
TIDA PowerPack is an open-source printed circuit board by janekc, from the janekc/TIDA-PowerPack repository on GitHub. It is a 4-layer board of 50 × 168 mm with 127 parts on 87 nets, routed with 594 tracks and 1,151 vias.
It is built around the TPS54531DDAR, SMTSO3015CTJ and BQ25798RQMR, with the CAT24C256WI-GT3, HOYLR2512-3W-3MR-1% and TLV75533PDBVR-MS among its other parts. Its parts include 56 capacitors, 35 resistors, 13 ICs, 3 inductors and 2 diodes.
Main components
12
TPS54531DDAR
SOIC-8-EP-40℃~+85℃@(TA) 1 3.5V~28V 570kHz 5A 800mV~26.04V Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
SMTSO3015CTJ
-M3X1.5 Tin plated - Patch round nutSinhooPatch Round Nut
BQ25798RQMR
QFN-29(4x4)-40℃~+85℃ 17uA 1~4 3.6V~24V 5A Charging IC I2C Lithium Battery Support QFN-29(4x4) Battery Management ROHSTexas InstrumentsBattery Management
CAT24C256WI-GT3
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1MHz 256Kbit 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSonsemiEEPROM
HOYLR2512-3W-3MR-1%
25123W 3mΩ Current Sense Resistor SMD ±1% 2512 Current Sense Resistors / Shunt Resistors ROHSMilliohmCurrent Sense Resistors / Shunt Resistors
TLV75533PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorised
XT30PW-F
UncategorisedAmass Electronics
PZ254V-11-02P
插件,P=2.54mm-40℃~+105℃ 1 1x2P 2.54mm 2.5mm 250V 2P 3A 3mm 6.1mm Black Brass Gold Square pin Through Hole Plugin,P=2.54mm Pin Headers ROHSXFCNPin HeadersBH-18650-B1BA002
--25~85℃ 18650 Battery holder Gold plating Phosphor bronze - Batter Holder ROHSMYOUNGButton And Strip Battery Connector
103AT-4-050
--30℃~+90℃ 10kΩ 3435K ±1% ±1% - NTC Thermistors ROHSSEMITECNTC Thermistors
DZ254R-11-04-63
插件,P=2.54mm1 1x4P 2.54mm 2.54mm 3A 3mm 4P 6mm Black Brass Gold Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSDEALONPin Headers
IRFH5302TRPBF
PQFN-8(5x6)-55℃~+150℃ 1 N-channel 100A 100W 2.35V 3.5mΩ@4.5V 30V 360pF 4.4nF 41nC@10V 890pF N-Channel PQFN-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdTIDA-PowerPack
This board is designed as a prototype for powering your projects using four 18650 lithium-ion battery cells. It delivers a 5V output with a maximum current of 5A. The cells are configured in a 4S1P (4-series, 1-parallel) arrangement, balanced and charged via USB-C Power Delivery (PD) with the maximum charging current supported by the cells. This design is based on the TIDA-050047 reference design by Texas Instruments.
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C9, C25, C26, C27, C28, C29, C32, C33, C42, C47, C48 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R21, R22, R48 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C8, C22, C31, C40 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C49, C50, C51, C62 |
| 5 | 75 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R25, R26, R27, R28, R46 |
| 5 | PZ254V-11-02P | easyeda2kicad:HDR-TH_2P-P2.54-V-M | H2, H4, H5, H6, H7 |
| 4 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C55, C56, C57, C58 |
| 4 | 10uF/25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C43, C44, C45, C46 |
| 4 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R15, R16 |
| 4 | BH-18650-B1BA002 | easyeda2kicad:BATTERY-SMD_18650-1S-L77.1-W20.7-1 | BT1, BT2, BT3, BT4 |
| 4 | SMTSO3015CTJ | easyeda2kicad:SMTSO3030CTJ | U17, U18, U19, U20 |
| 2 | 0.047uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C37, C38 |
| 2 | 103AT-4-050 | easyeda2kicad:RES-TH_L2.5-W2.5-P1.70-D0.3 | R19, R20 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30, R31 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33, R36 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 330pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 4.7uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16 |
| 2 | 47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C18 |
| 2 | DZ254R-11-04-63 | easyeda2kicad:HDR-TH_4P-P2.54-V-M | H1, H3 |
| 2 | IRFH5302TRPBF | easyeda2kicad:PQFN-8_L6.0-W5.0-P1.27-LS6.0-BL | Q3, Q4 |
| 2 | OVZ101M1CTR-0606 | easyeda2kicad:CAP-SMD_BD6.3-L6.6-W6.6-FD-A | C10, C11 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5, JP6 |
| 2 | xxx10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C34, C35 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C30 |
| 1 | 0.1uF/50V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C41 |
| 1 | 1.96k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 10.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 1000pF/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C39 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47 |
| 1 | 10nF/100V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 10nF/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20 |
| 1 | 17.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 1uF | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C52 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C53 |
| 1 | 2.2nF/100V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 22pF/50V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24 |
| 1 | 30.31k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 37.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 4.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C54 |
| 1 | 4.7uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 450k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34 |
| 1 | 5.24k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 51.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 665k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 76k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | APH0518T1R0M | easyeda2kicad:IND-SMD_L5.4-W5.2 | L2 |
| 1 | BLM21PG220SN1D | easyeda2kicad:L0805 | L3 |
| 1 | BQ25798RQMR | BQ25798RQMR:RQM0029A-MFG | U21 |
| 1 | BQ7791502PWR | easyeda2kicad:TSSOP-24_L7.8-W4.4-P0.65-LS6.4-BL_1 | U5 |
| 1 | CAT24C256WI-GT3 | easyeda2kicad:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U2 |
| 1 | CYA1040-4.7UH | easyeda2kicad:IND-SMD_L11.6-W10.1 | L1 |
| 1 | HOYLR2512-3W-3MR-1% | easyeda2kicad:R2512 | U6 |
| 1 | LTST-C190GKT | easyeda2kicad:LED0603-RD | LED1 |
| 1 | NetTie_2 | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | NT1 |
| 1 | PTPS25751DREFR | TPS25751DREFR:WQFN38_REF_TEX | U7 |
| 1 | SB1045L_C2844167 | easyeda2kicad:TO-277_3P-L5.4-W4.0-LS6.5-TR | U15 |
| 1 | SS-12M11G5 | easyeda2kicad:SW-TH_XKB_SS-12M11XX | SW1 |
| 1 | TLV75533PDBVR | easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U3 |
| 1 | TPS54531DDAR | easyeda2kicad:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL-EP2.0 | U4 |
| 1 | TVS2200DRVR | easyeda2kicad:WSON-6_L2.0-W2.0-P0.65-BL-EP | D2 |
| 1 | U262-16XN-4BVC11 | easyeda2kicad:USB-3.1-SMD_U262-161N-4BVC11 | USB1 |
| 1 | XT30PW-F | easyeda2kicad:CONN-TH_XT30PW-F-1 | U10 |
Similar boards
- 4 layers85 × 56 mm
- 2 layers56.9 × 51.1 mm
- 2 layers150.1 × 123.4 mm
Right main
UltimateHackingKeyboard/uhk60v1-electronics
The schematic and PCBs of the UHK 60 v1
285 parts177GPL-3.0 - 2 layers150.1 × 123.4 mm
Right main
UltimateHackingKeyboard/uhk60v2-electronics
The electronics files of the UHK 60 v2
177 parts11 - 4 layers65 × 56.5 mm
- 2 layers65 × 23.5 mm
Picise
ckuhtz/picise
Prototype for a time / location GNSS accessory for a Raspberry Pi 40-pin GPIO.
39 partsCC-BY-SA-4.0 - 4 layers65 × 56 mm
Questions
How big is the TIDA PowerPack PCB?
It measures 50 × 168 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TIDA PowerPack use?
127 parts, built around the TPS54531DDAR, SMTSO3015CTJ, BQ25798RQMR and CAT24C256WI-GT3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TIDA PowerPack KiCad files?
From the janekc/TIDA-PowerPack repository on GitHub, at the commit this page was made from: the board is TIDA-PowerPack.kicad_pcb and its schematic TIDA-PowerPack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TIDA PowerPack design in my own project?
Its repository states no licence, so its author keeps all rights: ask janekc before reusing the design.