2 layers136.4 × 123.4 mm
Left main
UltimateHackingKeyboard/uhk60v2-electronics
The electronics files of the UHK 60 v2
153 parts11
2 layers150.1 × 123.4 mm
The electronics files of the UHK 60 v2
- Size
- 150.1 × 123.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 177
- Nets
- 141
- Pads
- 809
- Tracks, vias
- 3,607, 428
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 May 2020
- Updated
- 15 Nov 2021
Overview
Right main is an open-source printed circuit board by UltimateHackingKeyboard, from the UltimateHackingKeyboard/uhk60v2-electronics repository on GitHub. It is a 2-layer board of 150.1 × 123.4 mm with 177 parts on 141 nets, routed with 3,607 tracks and 428 vias.
It is built around the MK22FN512VLH12, CAT24C256WI-GT3 and A-2004-3-4-LP-N-R, with the EVQPLMA15 and SS-01D among its other parts. Its parts include 68 diodes, 36 switches, 24 capacitors, 19 resistors and 8 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5
MK22FN512VLH12
LQFP-64(10x10)-40℃~+105℃ 1.71V~3.6V 120MHz 128KB 12bit 16bit 32 Bit 40 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
CAT24C256WI-GT3
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1MHz 256Kbit 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSonsemiEEPROMA-2004-3-4-LP-N-R
插件-40℃~+85℃ 1 Gold Non-LED Phosphor bronze Right Angle Unshielded 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAssmann WSW ComponentsEthernet Connectors / Modular Connectors (RJ45 RJ11)
EVQPLMA15
SMD,4.9x4.9mm-20℃~+70℃ 1.5mm 15V 2.6N 200,000 Cycles 20mA 4.9mm 4.9mm J-Lead Round Button SPST Surface Mount,Vertical SMD,4.9x4.9mm Tactile Switches ROHSPanasonicTactile SwitchesSS-01D
插件-25℃~+85℃ 125V 30V PC Pin Round Plunger SPDT 插件 Limit Switches ROHSOmronLimit Switches
README
README.mdUltimate Hacking Keyboard electronics
Contained are the schematics and board layout KiCad files for the Ultimate Hacking Keyboard, the UHK 60 v2 in specific.
Please make sure to clone this repo with:
git clone --recursive git@github.com:UltimateHackingKeyboard/uhk60v2-electronics.git
Now, you should be able to open any of the KiCad projects of the repo:
- left-main contains main PCB of left keyboard half.
- right-main contains the main PCB of the right keyboard half.
- display contains the PCB that interfaces our custom manufactured LED segment display with the left main PCB.
Parts
177| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | DIODE | UGL:SOD-323_Diode | D11, D12, D13, D14, D15, D16, D17, D21, D22, D23, D24, D25, D26, D27, D31, D32 +18 |
| 33 | RGB_LED | UGL:RGB_LED | D111, D112, D113, D114, D115, D116, D117, D121, D122, D123, D124, D125, D126, D127, D131, D132 +17 |
| 27 | S01_Socket | UGL:S01_Hybrid_Socket | SW12, SW13, SW14, SW15, SW16, SW17, SW21, SW22, SW23, SW24, SW25, SW26, SW32, SW33, SW34, SW35 +11 |
| 16 | 0.1uF | UGL:SM0603 | C3, C4, C6, C7, C9, C10, C11, C12, C14, C16, C17, C18, C19, C30, C32, C33 |
| 8 | FERRITE_BEAD | UGL:SM0603 | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8 |
| 7 | 33 | UGL:SM0603 | R5, R6, R7, R8, R11, R12, R13 |
| 5 | 5.1K | UGL:SM0603 | R1, R16, R17, R18, R20 |
| 4 | 0.47uF | UGL:SM0603 | C5, C21, C22, C24 |
| 4 | 6mm | UGL:hole_4.85mm | hole, hole, hole, hole |
| 4 | S01_Socket | UGL:S01_Hybrid_Socket_Inner_Right | SW11, SW31, SW41, SW42 |
| 3 | ESD | UGL:SC-74-TVS | U5, U6, U7 |
| 2 | 100K | UGL:SM0603 | R9, R14 |
| 2 | 1K | UGL:SM0603 | R23, R24 |
| 2 | 1uF | UGL:SM0603 | C8, C15 |
| 1 | 1M | UGL:SM0603 | R3 |
| 1 | 20K | UGL:SM0603 | R15 |
| 1 | 22uF | UGL:SM1206_Diode | C1 |
| 1 | 3220-10-0100-00 | UGL:2x5_0.05_pitch_pin_shrouded_header_min | P3 |
| 1 | 330 | UGL:SM0603 | R2 |
| 1 | 4.7nF | UGL:SM0603 | C13 |
| 1 | 5.7mm | UGL:hole_5.7mm | hole |
| 1 | A-2004-3-4-LP-N-R | UGL:4P4C_Jack_A-2004-3-4-LP-N-R | P1 |
| 1 | CAT24C256WI-GT3 | UGL:EEPROM-SOIC8 | U2 |
| 1 | CONN_10 | UGL:Tag_Connect_2x5_Header_With_Legs_Parallel_Numbering | P5 |
| 1 | CONN_5 | UGL:FFC_Connector_51281-0594 | P7 |
| 1 | CONN_5 | UGL:UHK_Female_Pogo_Pin_v2 | P2 |
| 1 | CONN_6 | UGL:Tag_Connect_2x3_Header_No_Legs | P4 |
| 1 | CONN_6 | UGL:Tag_Connect_2x3_Header_With_Legs | P6 |
| 1 | CONN_USB_C | UGL:USB_C_Connector_036-013 | J1 |
| 1 | CT05-3050-G1 | UGL:Reed_Switch_CT05-3050-G1 | SW1 |
| 1 | EVQPLMA15 | UGL:EVQPLMA15 | SW2 |
| 1 | IS31FL3737 | UGL:QFN-40_EP_5x5_Pitch0.4mm | U3 |
| 1 | LED | UGL:SM0603_Diode | D2 |
| 1 | LOGO | UGL:UHK_Logo_12x3.4_mm | G*** |
| 1 | MK22FN512VLH12 | UGL:LQFP64 | U1 |
| 1 | S01_Socket | UGL:S01_Hybrid_Socket_Backslash | SW27 |
| 1 | S01_Socket | UGL:S01_Hybrid_Socket_Right_Fn | SW54 |
| 1 | SS-01D | UGL:SS-01D | SW53 |
| 1 | label | UGL:label | LABEL1 |
The 176 most common of 177 parts.
More from UltimateHackingKeyboard/uhk60v2-electronics
2- 2 layers35.8 × 14 mm
Similar boards
- 2 layers150.1 × 123.4 mm
Right main
UltimateHackingKeyboard/uhk60v1-electronics
The schematic and PCBs of the UHK 60 v1
285 parts177GPL-3.0 - 4 layers90 × 75 mm
- 2 layers95.3 × 72.4 mm
Rck22
Muriukidavid/reflow_toaster_oven
Design for a home toaster oven reflow based on tinyk22 module
81 parts1 - 2 layers102.5 × 79 mm
- 4 layers11.2 × 18 mm
- 4 layers171.1 × 129.2 mm
- 4 layers60 × 90 mm
- 2 layers29.1 × 13.2 mm
Imu rj adapter
BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents
2 parts10
Questions
How big is the Right main PCB?
It measures 150.1 × 123.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right main use?
177 parts, built around the MK22FN512VLH12, CAT24C256WI-GT3, A-2004-3-4-LP-N-R and EVQPLMA15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right main KiCad files?
From the UltimateHackingKeyboard/uhk60v2-electronics repository on GitHub, at the commit this page was made from: the board is right-main/right-main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right main design in my own project?
Its repository states no licence, so its author keeps all rights: ask UltimateHackingKeyboard before reusing the design.