2 layers135.9 × 123.4 mm
Left main
UltimateHackingKeyboard/uhk60v1-electronics
The schematic and PCBs of the UHK 60 v1
243 parts177GPL-3.0
2 layers150.1 × 123.4 mm
The schematic and PCBs of the UHK 60 v1
- Size
- 150.1 × 123.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 285
- Nets
- 134
- Pads
- 767
- Tracks, vias
- 1,997, 207
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Dec 2015
- Updated
- 10 Apr 2022
Overview
Right main is an open-source printed circuit board by UltimateHackingKeyboard, from the UltimateHackingKeyboard/uhk60v1-electronics repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 150.1 × 123.4 mm with 285 parts on 134 nets, routed with 1,997 tracks and 207 vias.
It is built around the CAT24C256WI-GT3, A-2004-3-4-LP-N-R and EVQPLMA15. Its parts include 67 diodes, 24 capacitors, 21 resistors, 19 switches and 6 connectors.
Main components
3
CAT24C256WI-GT3
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 100 Years 1MHz 256Kbit 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSonsemiEEPROMA-2004-3-4-LP-N-R
插件-40℃~+85℃ 1 Gold Non-LED Phosphor bronze Right Angle Unshielded 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAssmann WSW ComponentsEthernet Connectors / Modular Connectors (RJ45 RJ11)
EVQPLMA15
SMD,4.9x4.9mm-20℃~+70℃ 1.5mm 15V 2.6N 200,000 Cycles 20mA 4.9mm 4.9mm J-Lead Round Button SPST Surface Mount,Vertical SMD,4.9x4.9mm Tactile Switches ROHSPanasonicTactile Switches
README
README.mdUltimate Hacking Keyboard electronics
Contained are the schematics and board layout KiCad files for the Ultimate Hacking Keyboard.
Please make sure to clone this repo with:
git clone --recursive https://github.com/UltimateHackingKeyboard/uhk60v1-electronics.git
Now, you should be able to open any of the 4 KiCad projects of the repo:
- left-main contains main PCB of left keyboard half.
- right-main contains the main PCB of the right keyboard half.
- display contains the PCB that interfaces our custom manufactured LED segment display with the left main PCB.
- connectors are very small PCBs that are soldered vertically to the left and right main circuit boards to interconnect the keyboard halves without needing a bridge cable.
Parts
285| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | DIODE | UGL:SOD-123_Diode | D11, D12, D13, D14, D15, D16, D17, D21, D22, D23, D24, D25, D26, D27, D31, D32 +18 |
| 33 | LED | UGL:Cherry_MX_LED | D111, D112, D113, D114, D115, D116, D117, D121, D122, D123, D124, D125, D126, D127, D131, D132 +17 |
| 14 | 0.1uF | UGL:SM0805 | C3, C4, C6, C7, C9, C10, C11, C12, C14, C16, C30, C32, C33, C34 |
| 9 | VIA | UGL:via_28_42mil_solid_con | GndVia1, GndVia2, GndVia3, GndVia4, GndVia5, GndVia6, GndVia7, GndVia8, GndVia9 |
| 7 | FERRITE_BEAD | UGL:SM0603 | FB1, FB2, FB3, FB4, FB5, FB6, FB7 |
| 6 | 4.7K | UGL:SM0805 | R1, R14, R17, R18, R23, R24 |
| 5 | 47 | UGL:SM0805 | R7, R8, R11, R12, R13 |
| 5 | 6mm | UGL:hole_6mm | hole, hole, hole, hole, hole |
| 4 | DNP | UGL:SM1206_DNP | C22, C23, C24, C25 |
| 3 | 100K | UGL:SM0805 | R4, R9, R15 |
| 3 | 2.5mm | UGL:hole_2.5mm | hole, hole, hole |
| 3 | >VALUE | Input_Club:FID | FID1, FID2, FID3 |
| 3 | ESD | UGL:SC-74-TVS | U5, U6, U7 |
| 3 | USB_DM_IN | UGL:Test_Point | TP_USB_DM_IN1, TP_USB_DM1, TP_USB_DP1 |
| 2 | 1M | UGL:SM0805 | R3, R16 |
| 2 | 1uF | UGL:SM0805 | C8, C15 |
| 2 | 33 | UGL:SM0805 | R5, R6 |
| 2 | via_28_42mil_solid_con | UGL:via_28_42mil_solid_con | VIA1, VIA2 |
| 1 | ' | UGL:Cherry_MX_Matias_Hybrid | SW36 |
| 1 | , | UGL:Cherry_MX_Matias_Hybrid | SW44 |
| 1 | - | UGL:Cherry_MX_Matias_Hybrid | SW15 |
| 1 | . | UGL:Cherry_MX_Matias_Hybrid | SW45 |
| 1 | / | UGL:Cherry_MX_Matias_Hybrid | SW46 |
| 1 | 0 | UGL:Cherry_MX_Matias_Hybrid | SW14 |
| 1 | 0.1uF | UGL:SM0603 | C5 |
| 1 | 10K | UGL:SM0805 | R10 |
| 1 | 10uF | UGL:SM1206_Diode | C20 |
| 1 | 16.9K | UGL:SM0805 | R19 |
| 1 | 1uF | UGL:SM0603 | C19 |
| 1 | 2.6mm | UGL:hole_2.4mm | hole |
| 1 | 3.3V | UGL:Test_Point | TP_3.3V1 |
| 1 | 3220-10-0100-00 | UGL:2x5_0.05_pitch_pin_shrouded_header_min | P3 |
| 1 | 330 | UGL:SM0805 | R2 |
| 1 | 3mm | UGL:hole_3mm | hole |
| 1 | 4700pF | UGL:SM0805 | C13 |
| 1 | 5.7mm | UGL:hole_5.7mm | hole |
| 1 | 548190519 | UGL:USB_Mini_B_Connector_0548190519 | J1 |
| 1 | 5V | UGL:Test_Point | TP_5V1 |
| 1 | 7 | UGL:Cherry_MX_Matias_Hybrid | SW11 |
| 1 | 8 | UGL:Cherry_MX_Matias_Hybrid | SW12 |
| 1 | 9 | UGL:Cherry_MX_Matias_Hybrid | SW13 |
| 1 | ; | UGL:Cherry_MX_Matias_Hybrid | SW35 |
| 1 | = | UGL:Cherry_MX_Matias_Hybrid | SW16 |
| 1 | A-2004-3-4-LP-N-R | UGL:4P4C_Jack_A-2004-3-4-LP-N-R | P1 |
| 1 | ADC | UGL:Test_Point | TP_ADC1 |
| 1 | BACKSPACE | UGL:Cherry_MX_Matias_Hybrid | SW17 |
| 1 | CA1 | UGL:Test_Point | TP_CA1 |
| 1 | CA2 | UGL:Test_Point | TP_CA2 |
| 1 | CA3 | UGL:Test_Point | TP_CA3 |
| 1 | CA4 | UGL:Test_Point | TP_CA4 |
| 1 | CA5 | UGL:Test_Point | TP_CA5 |
| 1 | CA6 | UGL:Test_Point | TP_CA6 |
| 1 | CA7 | UGL:Test_Point | TP_CA7 |
| 1 | CA8 | UGL:Test_Point | TP_CA8 |
| 1 | CAT24C256WI-GT3 | UGL:EEPROM-SOIC8 | U2 |
| 1 | CONN_5 | UGL:UHK_Connector_Right_PCB | P2 |
| 1 | CONN_6 | UGL:Tag_Connect_2x3_Header_With_Legs | P5 |
| 1 | CONN_6 | UGL:Tag_Connect_2x3_Header_No_Legs | P4 |
| 1 | CT05-3050-G1 | UGL:Reed_Switch_CT05-3050-G1 | SW1 |
| 1 | ENTER | UGL:Cherry_MX_Matias_Hybrid | SW37 |
| 1 | EVQPLMA15 | UGL:EVQPLMA15 | SW2 |
| 1 | FERRITE_BEAD_COMMON_MODE | UGL:Wurth_744232090 | FB8 |
| 1 | FUSE | UGL:SM1206 | F1 |
| 1 | GND | UGL:Test_Point | TP_GND1 |
| 1 | GNDPWR | UGL:Test_Point | TP_GNDPWR1 |
| 1 | H | UGL:Cherry_MX_Matias_Hybrid | SW41 |
| 1 | I | UGL:Cherry_MX_Matias_Hybrid | SW22 |
| 1 | INTB | UGL:Test_Point | TP_INTB1 |
| 1 | IS31FL3731 | UGL:SSOP-28 | U3 |
| 1 | J | UGL:Cherry_MX_Matias_Hybrid | SW32 |
| 1 | K | UGL:Cherry_MX_Matias_Hybrid | SW33 |
| 1 | KEYS_COL1 | UGL:Test_Point | TP_KEYS_COL1 |
| 1 | KEYS_COL2 | UGL:Test_Point | TP_KEYS_COL2 |
| 1 | KEYS_COL3 | UGL:Test_Point | TP_KEYS_COL3 |
| 1 | KEYS_COL4 | UGL:Test_Point | TP_KEYS_COL4 |
| 1 | KEYS_COL5 | UGL:Test_Point | TP_KEYS_COL5 |
| 1 | KEYS_COL6 | UGL:Test_Point | TP_KEYS_COL6 |
| 1 | KEYS_COL7 | UGL:Test_Point | TP_KEYS_COL7 |
| 1 | KEYS_ROW1 | UGL:Test_Point | TP_KEYS_ROW1 |
| 1 | KEYS_ROW2 | UGL:Test_Point | TP_KEYS_ROW2 |
The 202 most common of 285 parts.
More from UltimateHackingKeyboard/uhk60v1-electronics
3- 2 layers42.3 × 4.8 mm
Connectors
UltimateHackingKeyboard/uhk60v1-electronics
The schematic and PCBs of the UHK 60 v1
20 parts177GPL-3.0 - 2 layers32.5 × 13.5 mm
Display
UltimateHackingKeyboard/uhk60v1-electronics
The schematic and PCBs of the UHK 60 v1
14 parts177GPL-3.0
Similar boards
- 2 layers150.1 × 123.4 mm
Right main
UltimateHackingKeyboard/uhk60v2-electronics
The electronics files of the UHK 60 v2
177 parts11 - 4 layers90 × 75 mm
- 2 layers102.5 × 79 mm
- 4 layers11.2 × 18 mm
- 2 layers29.1 × 13.2 mm
Imu rj adapter
BUNPC/NN22-Technical-Documents
Repository for the storage and dissemination of NN22 technical documents
2 parts10 - 4 layers50 × 168 mm
- 4 layers65 × 56.5 mm
- 2 layers65 × 23.5 mm
Picise
ckuhtz/picise
Prototype for a time / location GNSS accessory for a Raspberry Pi 40-pin GPIO.
39 partsCC-BY-SA-4.0
Questions
How big is the Right main PCB?
It measures 150.1 × 123.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right main use?
285 parts, built around the CAT24C256WI-GT3, A-2004-3-4-LP-N-R and EVQPLMA15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right main KiCad files?
From the UltimateHackingKeyboard/uhk60v1-electronics repository on GitHub, at the commit this page was made from: the board is right-main/right-main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right main design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).