2 layers169.5 × 83.5 mm
GlowSignMainPCB
LEDs-by-glowingkitty/GlowSign
A battery powered LED sign for your laptop, or where ever else you want to use it!
130 parts1GPL-3.0
2 layers
Diodeplate
janekc/diodeplatePlateshaped example PCB design for a portable partylamp
- Copper layers
- 2
- Thickness
- 1.09 mm
- Parts
- 85
- Nets
- 99
- Pads
- 342
- Tracks, vias
- 884, 83
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 May 2022
- Updated
- 4 Aug 2022
Overview
Diodeplate is an open-source printed circuit board by janekc, from the janekc/diodeplate repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 85 parts on 99 nets, routed with 884 tracks and 83 vias.
It is built around the CP2102-GMR, ESP32-WROOM-32E and BL1117-33CX, with the SN74AHCT32QPWRQ1, U262-161N-4BVC11 and UMH3N among its other parts. Its parts include 38 capacitors, 30 diodes, 7 resistors, 6 ICs and 1 fuse. It belongs with the ESP32 boards of this library.
Main components
9
CP2102-GMR
WQFN-28-EP(5x5)-40℃~+85℃ 1Mbps 20mA 3V~3.6V 80uA Transceiver USB 2.0 WQFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules
BL1117-33CX
SOT-223-20℃~+125℃@(Tj) 1 1.5V@(1A) 12V 1A 2mA 3.3V 60dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSBLVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SN74AHCT32QPWRQ1
TSSOP-14-40℃~+125℃ 2V 2uA 4 4.5V~5.5V 7.9ns@5V,50pF 74AHCT Series 800mV 8mA 8mA OR Gate TSSOP-14 Logic Gates ROHSTexas InstrumentsLogic Gates
U262-161N-4BVC11
SMD-40℃~+85℃ 1 16P 3,000 Cycles 3A 7.3mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSXKB ConnectionUSB Connectors
UMH3N
SOT-363-55℃~+150℃ 0.5uA 100 100mA 150mW 2 NPN (Pre-Biased) 250MHz 300mV 50V 5V 6.11kΩ NPN SOT-363 Digital Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Digital TransistorsXL-5050RGBC-WS2812B
5050- LCDH ROHSXINGLIGHTUncategorised
TS-1185EC-C-D-B
SMD,3.7x3mm-30℃~+85℃ 100,000 cycles 12V 2.6N 2mm 3.65mm 3mm 50mA Black No Round Button SPST Surface Mount,Vertical Without Bracket SMD,3.7x3mm Tactile Switches ROHSXKB ConnectionTactile Switches
BSMD1812-300-16V
1812-40℃~+85℃ 1.4W 1.5mm 10mΩ 16V 3.41mm 3A 4.73mm 40A 4s 50mΩ 6A 1812 Resettable Fuses ROHSBHFUSEResettable Fuses
README
README.mddiodeplate
Plateshaped example PCB design for a portable partylamp
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C10, C11, C12, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27 +17 |
| 30 | XL-5050RGBC-WS2812B | footprint:LED-SMD_4P-L5.0-W5.0-BL_XL-5050RGBC | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +14 |
| 3 | TS-1185EC-C-D-B | footprint:SW-SMD_4P-L3.7-W3.0-P1.50-LS4.7 | boot, mainbutton, reset |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C38, C39 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 220uF | Capacitor_SMD:C_Elec_6.3x5.4 | C16 |
| 1 | 62 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | BL1117-33CX | footprint:SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR | U4 |
| 1 | BSMD1812-300-16V | footprint:F1812 | F1 |
| 1 | CP2102-GMR | footprint:QFN-28_L5.0-W5.0-P0.50-BL-EP | U2 |
| 1 | ESP32-WROOM-32E | footprint:WIFI-SMD_ESP32-WROOM-32E | U1 |
| 1 | SN74AHCT32QPWRQ1 | footprint:TSSOP-14_L5.0-W4.4-P0.65-LS6.5-BL | U6 |
| 1 | U262-161N-4BVC11 | footprint:USB-3.1-SMD_U262-161N-4BVC11 | U3 |
| 1 | UMH3N | footprint:SC-70-6_L2.2-W1.3-P0.65-LS2.1-BR | U5 |
Questions
What parts does the Diodeplate use?
85 parts, built around the CP2102-GMR, ESP32-WROOM-32E, BL1117-33CX and SN74AHCT32QPWRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Diodeplate KiCad files?
From the janekc/diodeplate repository on GitHub, at the commit this page was made from: the board is diodeplate.kicad_pcb and its schematic diodeplate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Diodeplate design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers48.4 × 97.3 mm
GlowTowerPCB
LEDs-by-glowingkitty/GlowTower
A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.
57 parts9GPL-3.0 - 2 layers155.9 × 27 mm
GlowBand
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
68 parts4MIT - 2 layers32 × 150 mm
Led tube
janekc/led-tube
It should run with 4 x 18650 lithium battery cells, that can be recharged through USB Power Delivery 3.0 with up to 18W.
65 partsCERN-OHL-P-2.0 - 4 layers30 × 40 mm
GlowCoreMini PCB
LEDs-by-glowingkitty/GlowCore-Mini
A small PCB for controlling an LED strip via USB-C or DC power. WLED compatible and with an integrated microphone for sound reactive animations!
89 parts6GPL-3.0 - 2 layers51.1 × 30 mm
Franzininho WIFI
Franzininho/Franzininho-WIFI-dev-edition
Versão da Franzininho para teste e validação do ESP32-S2
31 parts39 - 2 layers35.4 × 25.6 mm
- 4 layers52 × 27 mm
