2 layers
2 layers149.9 × 103 mm
UnifiedBreakout
jamwaffles/CNCMachine3LinuxCNC config and scripts for my DIY CNC machine
- Size
- 149.9 × 103 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 127
- Pads
- 293
- Tracks, vias
- 345, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Feb 2016
- Updated
- 19 Jan 2025
Overview
UnifiedBreakout is an open-source printed circuit board by jamwaffles, from the jamwaffles/CNCMachine repository on GitHub. It is a 2-layer board of 149.9 × 103 mm with 50 parts on 127 nets, routed with 345 tracks and 18 vias.
It is built around the G3VM-61A1, ILD74 and K104K15X7RF53H5, with the 35RX30100M8X11.5, D15S24A4GV00LF and MCL034MT among its other parts. Its parts include 20 resistors, 10 connectors, 7 ICs, 4 capacitors and 3 diodes. It belongs with the robots and motor control boards of this library.
Main components
8
G3VM-61A1
DIP-41.3V 100us 1Ω 2.5kV 48V 500mA 800us One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSOmronSolid State Relays - MOS Output (PhotoMOS)
ILD74
DIP-8-55℃~+100℃ 1.3V 12.5% 2 20V 300mV@2mA,16mA 35% 3V 3us 4.42kV 400mW 60mA DC Phototransistor DIP-8 Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators
K104K15X7RF53H5
插件,P=5mm100nF 50V 5mm X7R ±10% Plugin,P=5mm Multilayer Ceramic Capacitors MLCC - Leaded ROHSVishay IntertechnologyMultilayer Ceramic Capacitors MLCC - Leaded
35RX30100M8X11.5
插件,D8xL11.5mm-40℃~+130℃ 100uF 11.5mm 2000hrs@130℃ 220mΩ@100kHz 3.5mm 35V 8mm ±20% 插件,D8xL11.5mm Aluminum Electrolytic Capacitors - Leaded ROHSRubyconAluminum Electrolytic Capacitors - Leaded
D15S24A4GV00LF
插件15P 2 5A Female Through Hole 插件 D-Sub / VGA Connectors ROHSAmphenolD-Sub / VGA ConnectorsMCL034MT
-UncategorisedMulticomp178-025-513R571
-Panel Mount - New Arrivals ROHSNorCompD-Sub / VGA ConnectorsSS71800-041F
插件-40℃~+85℃ 4 Copper alloy Gold Non-LED RJ45 Jack Shielded cat5e 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSBel FuseEthernet Connectors / Modular Connectors (RJ45 RJ11)
README
README.mdCNCMachine
LinuxCNC config and scripts for my DIY CNC machine
NFS
https://askubuntu.com/questions/7117/which-to-use-nfs-or-samba
Better than Samba. sudo apt install nfs-common
In /etc/fstab:
192.168.0.9:/media/gangstacode /home/james/GCode nfs auto,_netdev,rw,hard,intr 0 0Mount samba share
mkdir ~/GCode
# yolo
chmod 0777 ~/GCode
sudo apt install gvfs-backends samba cifs-utilsThen in /etc/fstab:
//octahedron.house/gangstacode /home/james/GCode cifs username=james,password=[password],iocharset=utf8,file_mode=0777,dir_mode=0777,noperm 0 0Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7, R9, R16, R18, R19 |
| 6 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10, R20 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5, H6 |
| 3 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15 |
| 3 | G3VM-61A1 | Package_DIP:DIP-4_W7.62mm | U4, U5, U6 |
| 3 | ILD74 | Package_DIP:DIP-8_W7.62mm_LongPads | U1, U2, U3 |
| 2 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C3 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2, C4 |
| 2 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12 |
| 2 | DA15_Receptacle_MountingHoles | Connector_Dsub:DSUB-15_Female_Vertical_P2.77x2.84mm_MountingHoles | J1, J2 |
| 1 | +24V | LED_THT:LED_D3.0mm | D3 |
| 1 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 24V BUS | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J6 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U7 |
| 1 | ARGON J5 | Connector_IDC:IDC-Header_2x13_P2.54mm_Vertical | J3 |
| 1 | AUX | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J9 |
| 1 | DB25_Receptacle_Dual | UnifiedBreakout:NorComp-Dual-DB25 | J10 |
| 1 | DRAWBAR+MIST+AXIS_PWR | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J7 |
| 1 | LIMIT | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J8 |
| 1 | MESA P2 PWR | LED_THT:LED_D3.0mm | D2 |
| 1 | MESA P3 PWR | LED_THT:LED_D3.0mm | D1 |
| 1 | PENDANT | Connector_Dsub:DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J5 |
| 1 | ~ | UnifiedBreakout:SS71800-041F | J4 |
More from jamwaffles/CNCMachine
2- 2 layers80 × 55 mm
Similar boards
- 4 layers140 × 85 mm
Gantry Hub V2 PCB
bu-gsLab/Hardware
Repository of hardware designs for Detector Lab work. All designs when possible should be done using Autodesk Inventor 2019 or earlier.
47 parts1 - 2 layers85.1 × 35.6 mm
SmartTherm
Strooom/SmartTherm
Controlling a Junkers heating (Eurostar ZWE24) with an IoT thermostat
22 parts33 - 2 layers98.8 × 69.9 mm
CameraTriggerSensorNodeOnly
chrocket/RocketTrig
A camera controller for photographing high poweed model rockets
65 parts3GPL-3.0 - 2 layers121.9 × 87.6 mm
- 2 layers202.2 × 131 mm
New system
MadsRudolph/62768-energy-system
Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…
131 parts - 2 layers160 × 100 mm
- 2 layers70 × 60 mm
- 2 layers158.8 × 159.8 mm
Questions
How big is the UnifiedBreakout PCB?
It measures 149.9 × 103 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UnifiedBreakout use?
50 parts, built around the G3VM-61A1, ILD74, K104K15X7RF53H5 and 35RX30100M8X11.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UnifiedBreakout KiCad files?
From the jamwaffles/CNCMachine repository on GitHub, at the commit this page was made from: the board is UnifiedBreakout/UnifiedBreakout/UnifiedBreakout.kicad_pcb and its schematic UnifiedBreakout/UnifiedBreakout/UnifiedBreakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UnifiedBreakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask jamwaffles before reusing the design.