

Put your circuits on your plastic bricks of choice
- Size
- 47 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 36
- Pads
- 170
- Tracks, vias
- 227, 69
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2021
- Updated
- 22 Apr 2022
Overview
Clink is an open-source printed circuit board by jamesmunns, from the jamesmunns/brick-mount repository on GitHub. It is a 2-layer board of 47 × 47 mm with 60 parts on 36 nets, routed with 227 tracks and 69 vias.
It is built around the 74HC244D and AMS1117-3.3. Its parts include 32 resistors, 20 capacitors, 4 connectors and 3 ICs.
Main components
274HC244D
SO-20-300mil-40℃~+125℃ 160uA 2 2V~6V 4 6mA 6mA 74HC 9ns@5V,15pF Tri-State Unidirectional SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdBrick Boards

Boards designed to be compatible with LEGO and other plastic building blocks.
There are KiCAD footprints for a variety of different brick arrangements in the parts folder. I've also included a number of personal projects using these footprints in the boards/ folder.
LICENSE
The contents of the parts/brick-4_9id-6_0od.pretty/ folder are licensed under a CC0 license.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C6, C8, C10, C12, C14, C16, C18, C20 |
| 9 | 47uF | Capacitor_SMD:C_1206_3216Metric | C1, C5, C7, C9, C11, C13, C15, C17, C19 |
| 8 | 100 | Resistor_SMD:R_0805_2012Metric | R10, R13, R16, R19, R22, R25, R28, R31 |
| 8 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 1K8 | Resistor_SMD:R_0805_2012Metric | R11, R14, R17, R20, R23, R26, R29, R32 |
| 8 | 220 | Resistor_SMD:R_0805_2012Metric | R9, R12, R15, R18, R21, R24, R27, R30 |
| 2 | Conn_01x06 | brick-4_9id-6_0od:brick-1x6 | J1, J7 |
| 2 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J5, J6 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 74HC244 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | SPROCKET-GPIO | Everything:SPROCKET-GPIO | U3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
More from jamesmunns/brick-mount
12- 4 layers97 × 87 mm

- 2 layers97 × 99 mm

Proto quarter panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
188 parts40 - 2 layers95.5 × 127.5 mm

- 4 layers34 × 47.5 mm

- 2 layers97 × 95 mm

Proto half cables panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
116 parts40 - 4 layers15.5 × 47.5 mm

- 2 layers63.5 × 95.5 mm

- 2 layers47 × 95 mm

- 4 layers47 × 15 mm

- 2 layers79 × 47 mm

Black pill breakout
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
27 parts40 - 2 layers47 × 31 mm

- 2 layers47.5 × 63.5 mm

Similar boards
- 2 layers25 × 99 mm

Cremini blade atmega328p
nicklasfrahm/mykilio
Mykilio is the proposal for a new Living Standard with the goal to reimagine infrastructure management and monitoring.
102 parts1MIT - 2 layers18 × 42.8 mm

Stc avr isp
simonyiszk/sem-tanfolyam-stc
STC8G1K08 mikrovezérlős fejlesztőpanel a 2023-as alapozó tanfolyamhoz.
24 parts1MIT - 4 layers137 × 86 mm

- 4 layers184.2 × 169.5 mm

- 4 layers101 × 47 mm

- 2 layers120 × 66 mm

Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0 - 2 layers99.1 × 99.1 mm

6809v2
jbevren/6809v2
Code and design repository for the 6809v2 SBC: To be released at VCFMW 13
60 parts22 - 4 layers100 × 100 mm

Questions
How big is the Clink PCB?
It measures 47 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clink use?
60 parts, built around the 74HC244D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clink KiCad files?
From the jamesmunns/brick-mount repository on GitHub, at the commit this page was made from: the board is boards/clink/clink.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clink design in my own project?
Its repository states no licence, so its author keeps all rights: ask jamesmunns before reusing the design.