

74HCT6526
74HCT6526
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 222
- Pads
- 795
- Tracks, vias
- 1,839, 287
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Sep 2021
- Updated
- 8 Nov 2023
Overview
74HCT6526 is an open-source printed circuit board by dmolinagarcia, from the dmolinagarcia/74HCT6526 repository on GitHub. It is a 4-layer board of 100 × 100 mm with 93 parts on 222 nets, routed with 1,839 tracks and 287 vias.
It is built around the 74HC244D, 74HCT125PW and 74HC00D, with the 74HC74D, 74HC08D and 74HC32D among its other parts. Its parts include 43 capacitors, 42 ICs and 1 switch.
Main components
1274HC244D
SO-20-300mil-40℃~+125℃ 160uA 2 2V~6V 4 6mA 6mA 74HC 9ns@5V,15pF Tri-State Unidirectional SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HCT125PW
TSSOP-14-40℃~+125℃ 1 15ns@4.5V,50pF 160uA 4 4.5V~5.5V 6mA 6mA 74HCT Tri-State Unidirectional TSSOP-14 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops74HC08D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV 2 27ns@4.5V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC32D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、4.4V、5.9V 100mV、400mV、400mV 2 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 6ns@6V,50pF 74HC Series OR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC193D
SO-16-40℃~+125℃ 1 18ns@6V 2V~6V 4 49MHz 500mW 74HC Asynchronous Divide-by-2 Reset function、Synchronous counting、Asynchronous parallel load、Multi-mode counting Rising Edge Synchronous Up Counter、Down Counter SO-16 Counters, Dividers ROHSNexperiaCounters / Dividers74HC299D
SOIC-20-300mil-40℃~+125℃ 0ns 20ns 24ns 2V~6V 74HC D Latch Tri-State SOIC-20-300mil Latches ROHSNexperiaLatches74HC377D
SO-20-300mil-40℃~+125℃ 1 12ns 16ns@4.5V,50pF 2V~6V 3.5pF 3ns 4mA 4mA 74HC Series 77MHz 8 8uA D-Type Enable Rising Edge SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops74HC157D
SO-16-40℃~+125℃ 10ns@6.0V,50pF 160uA 2V~6V 5.2mA 5.2mA 74HC 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HCT04D
SO-14-40℃~+125℃ 1 19ns@4.5V,50pF 2V 2uA 3.7V 4.5V~5.5V 400mV 4mA 4mA 6 74HCT 800mV SO-14 Inverters ROHSNexperiaInverters74HCT74D
SOIC-14-40℃~+125℃ 1 2 3.5pF 3ns 4.5V~5.5V 40uA 44ns@4.5V,50pF 4mA 4mA 59MHz 5ns 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SO-14 Flip Flops ROHSNexperia74 Series
README
README.mdDISCLAIMER Everything you see here is the result of the work of an amateur hobbyist. I had no knowledge in any required field for this project when I started, so I offer no guarantee that, if you replicate my work, you may end burning up you Commodore, your fingertips, or your whole house. So far, no Commodore equipment (or fingertips, or whole house) have been permanently damaged in any way. But I can't promise to keep it that way.
74HCT6526
The 74HCT6526 is a very amateur attempt at building a MOS6526 replica using discrete logic. This repo is publicly shared just for educational purposes, and I can offer no guarantee on the correct behaviour of this implementation. So far, it's working great for me, but I can't promise anything.
Current Status
As of v0.2.2, the 74HCT6526 is extremely cycle accurate when compared to a real 6526. Some VICE test still fail on edge cases, but it has been tested against multiple games with very satisfactory results.
History
Work on the 74HCT6526 began in the summer of 2018. I was so impressed by other attempts at replicating Commodore chips, that I wanted to give it myself a try. I chose the CIA, as it wasn't replicated back then, even though it seemed the simplest chip. I had no previous knowledge in electronics, only some lessons back in college more than 20 years ago.
Important note
Please visit http://forum.6502.org/viewtopic.php?f=4&t=5593 for more information
Versioning
74HCT6526 is released under the following versioning scheme:
MAJOR.MINOR.REVISION
For a stack to work properly, is mandatory that all boards share the same MAJOR.MINOR versión. Any change than renders a board incompatible with the previous releases triggers a new MINOR version. If a version only includes fixes, but does not alter the buses, it's only a new revision. There may be some cases where boards with different MAJOR.MINOR version can actually work together, but this is not something I can guarantee or predict. A deep look at the schematics to understand the differences between releases is needed to actually confirm this.
Under the current scheme, I don't think I'll ever need a new MAJOR version, but it is nice to have it there, just in case.
Upgrades
In the upgrades folder, there's a guide for each version/board pair, with instructions to upgrade the board up until the latest version. You'll see theres no file for the latest version (As there's no upgrade path for it).
Whenever a new release is published, upgrade path for the now second-oldest release will by published.
WARNING! I offer no guarantee on anything on this project, but, specially on the upgrades part.
Manufacturing
All boards are tested against JLCPCB and PCBWAY capabilities. For PCBWAY, there is no increase in cost compared to the standard 4 layer board.
Releases
- v0.1.0 First production run. Only includes B0 (DDR and PORTs)
- v0.1.0a First production run for B1. (TIMERA and CREGA)
- v0.1.1 Second production run for B1. Fixes TASTART issue. First B2 (TIMERB and CREGB)
- v0.1.2 First production run for B3. (SDR and ICR)
- v0.2.0 First MINOR advance. B0+B1+B2+B3 tested and validated.
- v0.2.1 Fixes for Reload under Underflow issue.
- v0.2.2 First production run for B4 (TOD). It now passes test 01 and 02 in both NEW and OLD modes.
Changelog
[0.2.2 ] - 23-Jun-2023
- B0. Some HCT parts are changed to HC
- B1. Split TIMER into modules for improved readability
- B2. Split TIMER into modules for improved readability
- B3. Issue #12. Fixed all issues for test 02
- B3. Master Switch for Mode Change. (Old vs NEW)
- B3. Some HC parts are changed to HCT
- B4. Added TOD PCB and SCH
- All boards. Published upgrade procedures
[0.2.1 ] - 26-Mar-2023
- All boards. Added pdfs for all schematic and pcbs for all versions for ease of access
- B1. Changes to Reload portion of TimerA pipeline to fix 01cmpold issue
- B2. Changes to Reload portion of TimerA pipeline to fix 01cmpold issue
- B3. Added switch to select OLD or NEW CIA
[0.2.0 ] - 24-Jan-2023
- All boards. Removed TARUNMODE from the ControlBus
- All boards. Updated for JLCPCB and PCBWAY capabilities
- All boards. Minor aesthetic changes to schematics
- All boards. Updated PDFs on the release
- B1. Optimized CNT edge detector
- B2. Optimized CNT edge detector
- B3. Fixed FLAG edge detector in ICR
- B3. Fixed SDR input and output issues from v0.1.2 (not sending nor receiving)
[0.1.2 ] - 01-Nov-2022
- B3. First release. SDR and ICR
- B2. Updates for JLCPCB capabilities
- All boards. Schematic review. Added /RES capacitor to prevent false restarts
[0.1.1 ] - 24-Aug-2022
- B2. First release.
- B1. Fixed additional cycle on forceload by removing second flipflop in the chain (rolled-back)
- B1. Added additionad dFF to Start before being fed into the timer
- B1. D and DZ moved to separate buses on schematic.
- B0. Routing optimized. D and DZ moved to separate buses on schematic. Silkscreen improved.
[0.1.0a] - 06-Jun-2022
- B1 with TimerA and Control Register A. Ready for production.
[0.1.0 ] - 19-Oct-2021
- Mounting holes pads were covered with soldermask. Soldermask removed and pads properly labeled.
- Silkscreen fixes
- Updated gerber files
- B0 with DDRs, PORTs, and bus interface
Status updates
- June 23, 2023. v0.2.2 released. Adds TOD (B4) and fixes more NEW to OLD issues. Now passes tests 01 and 02.
- March 26, 2023. v0.2.1 released. Fixes a missing IRQ issue on reload while underflowing. It also adds a selector for OLD vs NEW cia in ICR
- January 24, 2023. v0.2.0 released. Fixes a potential problem on B1 and B2 with CNT edge detector. It also fixes some bugs on B3. A cleanup of schematic, PCBs and PDFs for all boards has been done. TARUNMODE is removed from controlbus as it is not needed. This triggers a new MINOR version
- November 01, 2022. v0.1.2 released. Includes B3 (SDR+ICR) and some minor tweaks to all boards
- August 24, 2022. v0.1.1 released. Fixes a bug in B1 (TASTART) and adds B2. Minor routing fixes to all boards
- June 06, 2022. v0.1.0a released. It adds B1 to v0.1.0
- October 19, 2021. v0.1.0 is released. It add B0 to v0.1.0
- September 12th, 2021. Repository is now public. B0 schematic is 100% done. PCB layout is 100% done. It's currently being reviewed before sending it into production
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 100n | Capacitor_SMD:C_0603_1608Metric | C300, C301, C302, C303, C304, C305, C306, C307, C308, C309, C310, C311, C312, C313, C314, C315 +27 |
| 10 | 74HC00 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U301, U309, U316, U320, U321, U322, U323, U324, U328, U329 |
| 10 | 74HC74 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U303, U304, U317, U330, U331, U332, U333, U334, U340, U342 |
| 5 | 74HC08 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U318, U325, U326, U337, U339 |
| 4 | 74HC32 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U306, U314, U319, U338 |
| 3 | 74HC244 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U310, U312, U336 |
| 3 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | CONTROLBUS3, DATABUS3, ENABLEBUS3 |
| 2 | 74HC193 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U308, U315 |
| 2 | 74HC299 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U307, U313 |
| 2 | 74HC377 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U311, U327 |
| 2 | GND | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | GND101, GND102 |
| 2 | VCC | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | VCC101, VCC102 |
| 1 | 74HC157 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U341 |
| 1 | 74HCT04 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U335 |
| 1 | 74HCT125 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U302 |
| 1 | 74HCT74 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U305 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW301 |
More from dmolinagarcia/74HCT6526
4Similar boards
- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers210 × 170 mm

- 2 layers178 × 711 mm

- 2 layers297 × 210 mm

- 4 layers88.9 × 43.2 mm

- 2 layers213.1 × 129 mm

- 2 layers200 × 150 mm

- 4 layers100 × 100 mm

Questions
How big is the 74HCT6526 PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 74HCT6526 use?
93 parts, built around the 74HC244D, 74HCT125PW, 74HC00D and 74HC74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 74HCT6526 KiCad files?
From the dmolinagarcia/74HCT6526 repository on GitHub, at the commit this page was made from: the board is B3/B3.kicad_pcb and its schematic 74HCT6526.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 74HCT6526 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dmolinagarcia before reusing the design.


