

Cc afe
Cell Controller AFE KiCad PCB
- Size
- 241.3 × 170.4 mm
- Copper layers
- 12
- Parts
- 376
- Nets
- 475
- Pads
- 1,850
- Tracks, vias
- 4,843, 730
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Jun 2026
- Updated
- 20 Aug 2026
Overview
Cc afe is an open-source printed circuit board by jamead, from the jamead/cc-afe-hw repository on GitHub. It is a 12-layer board of 241.3 × 170.4 mm with 376 parts on 475 nets, routed with 4,843 tracks and 730 vias.
It is built around the AD5754BREZ, ADS1115IDGSR and SN74LVC8T245PW, with the ACPL-064L-560E, 74LVC8T245PW and TCA9546AD among its other parts. Its parts include 152 resistors, 126 capacitors, 26 ICs, 22 inductors and 18 connectors.
Main components
12AD5754BREZ
TSSOP-24-EP-40℃~+85℃ 10us 16 16LSB 4 4.5V~16.5V 40uA SPI Voltage Buffer TSSOP-24-EP Digital to Analog Converters (DAC) ROHSAnalog DevicesDigital To Analog Converters (DAC)ADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)SN74LVC8T245PW
TSSOP-24-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 8 Bidirectional CMOS CMOS Tri-State TSSOP-24 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersACPL-064L-560E
SO-8-40℃~+105℃ 1.3V 10Mbps 10mA 2 2.7V~5.5V 20kV/us 3.75kV 6mA 80ns 80ns DC SO-8 Logic Output Optoisolators ROHSBroadcom LimitedLogic Output Optoisolators74LVC8T245PW
TSSOP-24-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 8 Bidirectional Power-Off Protection Tri-State TSSOP-24 Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersTCA9546AD
SOIC-16-40℃~+85℃ 1.65V~5.5V 1.6uA 1ns 7mA Bus Switch Level shifting、Hot-swap protection Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersTPS7A8500RGRT
VQFN-20-EP(3.5x3.5)-40℃~+125℃@(Tj) 1 150mV@(4A) 25uA 39dB@(500kHz) 4.4uVrms 4A 6.5V 800mV~5V Adjustable Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Over Voltage Protection、Enable VQFN-20-EP(3.5x3.5) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsLinear Voltage Regulators (LDO)ADR3425ARJZ-R7
SOT-23-6-40℃~+125℃ 100uA 10mA 18uVp-p 2.5V 2.7V~5.5V 42uVrms 8ppm/℃ Fixed Series ±0.1% SOT-23-6 Voltage Reference ROHSAnalog DevicesVoltage ReferenceEPY.00.250.NTN
插件2 50Ω Board Side 插件 Coaxial Connectors (RF) ROHSLEMOCoaxial Connectors (RF)LSMGG160808T331RG
0603Ferrite BeadsTaiyo YudenCB3LV-3I-25M0000
SMD7050-4PSMD7050-4P Crystal Oscillators ROHSCTS Electronic ComponentsCrystal OscillatorsNX7002BKW
-- MOSFETs ROHSNexperiaMOSFETs
README
README.mdNSLS-II Cell Controller AFE Board
The NSLS-II Cell Controller AFE (Analog Front End) is a KiCad 10 hardware design intended for use with the zuDFE board. The AFE board mates directly with the zuDFE and provides high-speed optical communications, Ethernet connectivity, precision analog outputs, and isolated digital I/O for NSLS-II cell controller applications.

Highlights
- 8 × SFP+ interfaces
- Supports 10 Gb/s-class high-speed serial links
- 2 × Gigabit Ethernet ports
- 4 × 20-bit DAC outputs
- High-resolution analog outputs for precision control applications
- 8 × isolated digital outputs
- 8 × isolated digital inputs
- Designed to mate directly with the zuDFE board
- Designed using KiCad 10
Board Purpose
The Cell Controller AFE board provides the external analog, digital, and communications interfaces required by the NSLS-II Cell Controller system. The board works together with the zuDFE, which provides the FPGA/processing resources for the system.
The AFE concentrates the physical interfaces needed by the controller onto a dedicated board while allowing the digital processing and control functions to remain on the zuDFE.
Interfaces
| Interface | Quantity | Description |
|---|---|---|
| SFP+ | 8 | 10 Gb/s-class high-speed serial interfaces |
| Ethernet | 2 | 1 Gb/s Gigabit Ethernet ports |
| DAC Outputs | 4 | 20-bit precision analog outputs |
| Isolated Digital Outputs | 8 | Galvanically isolated control outputs |
| Isolated Digital Inputs | 8 | Galvanically isolated status/interlock inputs |
| zuDFE Interface | 1 | Board-to-board interface to the zuDFE |
Design Files
This repository contains the KiCad 10 design files for the NSLS-II Cell Controller AFE board, including the schematic, PCB layout, and associated manufacturing documentation.
Software
The design is maintained with:
- KiCad 10
Opening or modifying the project with earlier versions of KiCad is not recommended.
Related Hardware
zuDFE
The Cell Controller AFE is designed as a companion board for the zuDFE. The two boards mate together to form the complete Cell Controller hardware platform.
The zuDFE provides the primary digital processing and FPGA resources, while the Cell Controller AFE provides the high-speed communications, precision analog outputs, and isolated field I/O.
Application
This hardware is intended for use in the NSLS-II Cell Controller system at Brookhaven National Laboratory.
NSLS-II — National Synchrotron Light Source II
Brookhaven National Laboratory
Parts
376| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115 +52 |
| 68 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +52 |
| 16 | 100 | Resistor_SMD:R_0603_1608Metric | R53, R54, R55, R56, R57, R58, R59, R60, R61, R62, R63, R64, R65, R66, R67, R68 |
| 16 | 22u | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12, C13, C14, C15, C16, C25, C26, C27, C28, C29, C30, C31, C32 |
| 16 | 300Ohms@100MHz | Inductor_SMD:L_0603_1608Metric | L1, L2, L3, L4, L5, L6, L7, L8, L9, L10, L11, L12, L13, L14, L15, L16 |
| 16 | 49.9 | Resistor_SMD:R_0603_1608Metric | R97, R98, R99, R100, R105, R106, R107, R108, R132, R133, R135, R136, R139, R140, R141, R142 |
| 13 | 10u | Capacitor_SMD:C_0805_2012Metric | C39, C44, C51, C57, C58, C61, C78, C79, C83, C86, C121, C122, C125 |
| 10 | EPY.00.250.NTN | My Footprints:LEMO_EPY.00.250.NTN | J9, J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 9 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C47, C55, C65, C74, C75, C116, C118, C119, C124 |
| 9 | GREEN | LED_SMD:LED_0603_1608Metric | D1, D3, D5, D7, D9, D11, D13, D15, D17 |
| 9 | SN74LVC8T245PW | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U5, U10, U13, U14, U15, U18, U22, U23, U24 |
| 8 | 22 | Resistor_SMD:R_1206_3216Metric | R117, R123, R124, R125, R126, R127, R128, R129 |
| 8 | 390 | Resistor_SMD:R_0603_1608Metric | R131, R134, R137, R138, R143, R144, R145, R146 |
| 8 | RED | LED_SMD:LED_0603_1608Metric | D2, D4, D6, D8, D10, D12, D14, D16 |
| 7 | 2.2K | Resistor_SMD:R_0603_1608Metric | R87, R95, R96, R101, R102, R109, R110 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | MT1, MT2, MT3, MT4, MT5, MT6 |
| 5 | 30 | Resistor_SMD:R_0603_1608Metric | R118, R119, R120, R121, R130 |
| 5 | 6469028-1 | My Footprints:TE_6469028-1 | J1, J2, J3, J4, J5 |
| 5 | LSMGG160808T331RG | My Footprints:IND_LSMG_160808_TAY | L17, L19, L20, L21, L22 |
| 4 | 100u | Capacitor_SMD:C_0805_2012Metric | C66, C68, C73, C76 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R149, R150, R151, R152 |
| 4 | 165 | Resistor_SMD:R_0603_1608Metric | R113, R114, R115, R116 |
| 4 | 47u | Capacitor_SMD:C_0805_2012Metric | C72, C80, C117, C123 |
| 4 | ACPL-064L-560E | My Footprints:OPTO_ACPL-064L-560E | U17, U19, U20, U21 |
| 4 | GND | My Footprints:TestPoint_RCS-0C | TP1, TP2, TP3, TP4 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C46, C49, C50 |
| 2 | 0.01u | Capacitor_SMD:C_0805_2012Metric | C77, C120 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C99, C100 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C48, C67 |
| 2 | 4.99K | Resistor_SMD:R_0603_1608Metric | R88, R90 |
| 2 | 49.9K | Resistor_SMD:R_0603_1608Metric | R104, R111 |
| 2 | 74LVC8T245 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1, U2 |
| 2 | TCA9546A | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3, U4 |
| 2 | TPS7A8500RGRT | My Footprints:QFN50P350X350X100-21N | U9, U25 |
| 1 | +3.3V | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R89 |
| 1 | 0.56u | My Footprints:COILCRAFT_XGL5050 | L18 |
| 1 | 0875-1G2T-V5 | My Footprints:BEL_0875-1G2T-V5 | J8 |
| 1 | 1000pF | Capacitor_SMD:C_1812_4532Metric | C126 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R85 |
| 1 | 12.4K | Resistor_SMD:R_0805_2012Metric | R147 |
| 1 | 182 | Resistor_SMD:R_0805_2012Metric | R86 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R112 |
| 1 | 2.21K | Resistor_SMD:R_0805_2012Metric | R122 |
| 1 | 2.37K | Resistor_SMD:R_0805_2012Metric | R148 |
| 1 | 33.2K | Resistor_SMD:R_0603_1608Metric | R91 |
| 1 | 39.2K | Resistor_SMD:R_0603_1608Metric | R103 |
| 1 | 39301022 | My Footprints:MOLEX_39301022 | J7 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C52 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C62 |
| 1 | 4.87K | Resistor_SMD:R_0603_1608Metric | R94 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R92 |
| 1 | 49.9K | Resistor_SMD:R_0805_2012Metric | R93 |
| 1 | AD5754BREZ | My Footprints:SOP65P640X120-25N | U11 |
| 1 | ADR3425ARJZ | My Footprints:SOT95P280X145-6N | U16 |
| 1 | ADS1115IDGSR | My Footprints:SOP50P490X110-10N | U26 |
| 1 | CB3LV-3I-25M0000 | My Footprints:OSCCC700X500X180-4N | X1 |
| 1 | DP83849CVS_NOPB | My Footprints:QFP50P1400X1400X120-80N | U6 |
| 1 | LOGO | myparts:bnl_logo | G*** |
| 1 | LT3045xDD | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U7 |
| 1 | LT8627SPJV-TRMPBF | My Footprints:05-08-7039_ADI | U8 |
| 1 | NX7002BKW | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | Net-(U8-CLKOUT) | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
| 1 | SFP+x8 | My Footprints:1-2007394-5 | J6 |
| 1 | TPS259827ONRGET | My Footprints:TPS259827ONRGET | U12 |
Similar boards
- 6 layers241.3 × 76.2 mm

- 14 layers205.6 × 228.6 mm

- 10 layers241.3 × 255 mm

- 2 layers64.8 × 109.2 mm

Teensy eurorack
newdigate/teensy-control-voltage
Hardware Design: 16 channel analog control voltage shield for teensy 4.1; 8ch in / 8ch out; +-10V @ 16bits/sample;
52 parts27MIT - 4 layers110 × 92 mm

Musicbrain vcf8kern
MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it
412 partsMIT - 2 layers110.5 × 111.1 mm

Teensy eurorack breakout
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
78 parts259MIT - 2 layers77.5 × 40.6 mm

Link adapter
jkominek/piano-conversion
Hardware, and some firmware, for acoustic piano to MIDI controller conversion.
42 parts53 - 2 layers

Controller
alvarop/ostur
This is a work in progress for a cheese cave controller system. The goal is to be able to control a mini fridge to get the right conditions for cheesemaking.
89 parts8MIT
Questions
How big is the Cc afe PCB?
It measures 241.3 × 170.4 mm and has 12 copper layers.
What parts does the Cc afe use?
376 parts, built around the AD5754BREZ, ADS1115IDGSR, SN74LVC8T245PW and ACPL-064L-560E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cc afe KiCad files?
From the jamead/cc-afe-hw repository on GitHub, at the commit this page was made from: the board is cc-afe.kicad_pcb and its schematic cc-afe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cc afe design in my own project?
Its repository states no licence, so its author keeps all rights: ask jamead before reusing the design.