

Tac5212
Breakout board for TAC5212
- Size
- 43.2 × 35.6 mm
- Copper layers
- 4
- Thickness
- 1.54 mm
- Parts
- 58
- Nets
- 40
- Pads
- 156
- Tracks, vias
- 324, 47
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Oct 2025
- Updated
- 28 Oct 2025
Overview
Tac5212 is an open-source printed circuit board by jakeson21, from the jakeson21/tac5212-breakout repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 43.2 × 35.6 mm with 58 parts on 40 nets, routed with 324 tracks and 47 vias.
It is built around the SPX3819M5-L-3-3 and 150080VS75000. Its parts include 18 capacitors, 13 connectors, 4 resistors, 3 ICs and 1 diode.
Main components
2SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators150080VS75000
0805-40℃~+85℃ 12mcd 140° 2.4V 20mA 570nm 572nm Discrete Diode Water Clear 0805 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
README
README.mdtac5212_breakout
Breakout board for TAC5212
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12, C13, C14, C15, C16 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C6, C8, C17, C18 |
| 3 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C2, C4, C7 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | GND | footprints_2:1030 | TP2, TP4 |
| 2 | MH | MountingHole:MountingHole_2.2mm_M2 | H2, H3 |
| 2 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 150080VS75000 | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 54-00178 | Headphone_Jack:TENSILITY_54-00178 | J13 |
| 1 | 830207659209 | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | Y1 |
| 1 | ADDR | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | AIN1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | AIN2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | AIN_GND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | AOUT1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | AOUT2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | AOUT_GND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | AVDD | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP5 |
| 1 | CLK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | DIGI | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | DIN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | IN1N_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP7 |
| 1 | IN1P_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | IN2N_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP9 |
| 1 | IN2P_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | IOVDD | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3 |
| 1 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP10 |
| 1 | LOGO | SparkFun-Qwiic:qwiic_4mm | G*** |
| 1 | MICBIAS | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | MIC_GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | OUT1N_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | OUT1P_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | OUT2N_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | OUT2P_C_BYP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | Qwiic | Connectors_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6 |
| 1 | R_ADDR | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | VDC | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | XTAC5212IRGER | footprints:VQFN24_RGE_CORNERPADS_TEX | U1 |
Similar boards
- 4 layers74.4 × 50.2 mm

- 4 layers70.1 × 89.6 mm

Hyperram cyclonev
embelon/hyperram_cyclonev_pcb
Simple PCB to connect HyperRAM memories to Cyclone V SoC Development Kit via HSMC connector
65 parts3Apache-2.0 - 4 layers100 × 120 mm

Panoptes
jjCSE113NMT/dsp-neutron-spectrometer
A place to keep all our material related to our senior design project.
111 parts3 - 4 layers100 × 100 mm

- 4 layers152.4 × 152.4 mm

- 4 layers127 × 101.6 mm

- 2 layers88.9 × 86.4 mm

KeyboardPCB
AbleArcher88/RPi-Minikeyboard
Handheld minerature keyboard for Raspberry Pi 4 (and hopefully later)
179 parts - 4 layers45 × 41.9 mm

Syzygy hyperram hyperflash
embelon/syzygy-hyperram-hyperflash
Syzygy Pod PCB with HyperRAM and HyperFlash memories
36 partsApache-2.0
Questions
How big is the Tac5212 PCB?
It measures 43.2 × 35.6 mm and has 4 copper layers, 1.54 mm thick.
What parts does the Tac5212 use?
58 parts, built around the SPX3819M5-L-3-3 and 150080VS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tac5212 KiCad files?
From the jakeson21/tac5212-breakout repository on GitHub, at the commit this page was made from: the board is tac5212.kicad_pcb and its schematic tac5212.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tac5212 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).