
Hyperram cyclonev
embelon/hyperram_cyclonev_pcb
Simple PCB to connect HyperRAM memories to Cyclone V SoC Development Kit via HSMC connector

Syzygy Pod PCB with HyperRAM and HyperFlash memories
Syzygy hyperram hyperflash is an open-source printed circuit board by embelon, from the embelon/syzygy-hyperram-hyperflash repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 45 × 41.9 mm with 36 parts on 59 nets, routed with 1,001 tracks and 133 vias.
It is built around the ATTINY44A-MMH, S27KL0641DABHI020 and 150080VS75000. Its parts include 14 capacitors, 8 resistors, 4 ICs, 3 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Syzygy Pod PCB with HyperRAM and HyperFlash memories
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C10, C11, C12 |
| 4 | 1u 16v | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C9, C13, C14 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R7, R8 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID5, FID6, FID8 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 2 | 150080VS75000 | syzygy-hyperram-hyperflash:LEDC2012X80N | LED1, LED2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2, J3 |
| 1 | 287k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 40k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | ATTINY44A-MMH | syzygy-hyperram-hyperflash:QFN45P300X300X85-21N | IC1 |
| 1 | LOGO | SYZYGY:SYZYGY_Logo | G*** |
| 1 | S27KL0641DABHI020 | syzygy-hyperram-hyperflash:BGA24C100P5X5_600X800X100 | IC3 |
| 1 | S71KL256SC0BHI | syzygy-hyperram-hyperflash:BGA24C100P5X5_600X800X100 | IC4 |
| 1 | SYZYGY_STD | syzygy-hyperram-hyperflash:QTE-020-XX-YYY-D-A | J1 |
| 1 | TLV6710DDCT | syzygy-hyperram-hyperflash:SOT95P280X100-6N | IC2 |
The 35 most common of 36 parts.

embelon/hyperram_cyclonev_pcb
Simple PCB to connect HyperRAM memories to Cyclone V SoC Development Kit via HSMC connector

butterstick-fpga/syzygy-breakout-standard
Basic SYZYGY pod breaking out to 0.1" proto area

adamcritchley/syzygy-breakout-flash-LVL
SYZYGY Breakout Board with level shifters for any voltage flash chip

adamcritchley/syzygy-breakout-flash-1V8
SYZYGY Breakout Board for strictly 1.8V flash chips

oomlout/oomlout_oomp_project_bot_v_2

martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board


embelon/hyperram_asic_pcb
Test PCB for CARAVEL ASIC with HyperRAM memory (S27KL0641)
It measures 45 × 41.9 mm and has 4 copper layers, 1.56 mm thick.
36 parts, built around the ATTINY44A-MMH, S27KL0641DABHI020 and 150080VS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the embelon/syzygy-hyperram-hyperflash repository on GitHub, at the commit this page was made from: the board is syzygy-hyperram-hyperflash.kicad_pcb and its schematic syzygy-hyperram-hyperflash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).