
Libreboard broken
256foundation/libreboard
Open Source Bitcoin Mining Control Board

Open source streaming appliance
CM5IO is an open-source printed circuit board by jakemwood, from the jakemwood/alas repository on GitHub. It is a 4-layer board of 101.9 × 90.8 mm with 72 parts on 215 nets, routed with 598 tracks and 50 vias.
It is built around the 74LVC1G07SE-7-MS, AP3441SHE-7B and PCM1863DBTR, with the AP22653W6, B2B-XH-A(LF)(SN) and DALC208SC6 among its other parts. Its parts include 32 capacitors, 13 resistors, 8 connectors, 4 ICs and 4 diodes. It belongs with the Raspberry Pi (Linux) boards of this library.
Commercial support is available for purchase from Ridgeline Radio to support our non-commercial, non-profit radio station.
Stations with budgets over $100,000/year who use ALAS are encouraged to support the project in one of a few ways:
ALAS is a hardware/software appliance package that automatically streams and records audio with high reliability. Whenever audio is present on the sound card input, ALAS will begin streaming and recording. If streaming should stop, recording will continue, and vice versa. It achieves high straming reliability through the usage of a bonding VPN, with the designs calling for both a cellular modem and usage of built-in WiFi. ALAS will discontinue streaming and recording after a configurable period of silence.
The main application, written in Rust, which is deployed onto a Raspberry Pi. It is responsible for:
You'll find FreeCAD and STEP files in this folder for fabricating the rack mountable case.
You'll find instructions on how to assemble the hardware and user's guide in this folder. Documentation for software is generally found adjacent to these components.
To save bandwidth, a static frontend is available with a configurable backend. The static frontend is found here. This is distinct from the "deployed frontend," which is used during the initial configuration of the network settings on the Raspberry Pi.
This is the Terraform used to create the bonding VPN servers in Microsoft Azure.
alas_lib is meant to serve as the "brains" of the operation. However, there is some serious
separation of concerns issues here, as the main state of the application is actually held in alas.
This is the monolithic application that runs on the Raspberry Pi.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C7, C8, C14, C15, C16, C17 |
| 7 | 10uF | PCM_JLCPCB:C_0402 | C12, C13, C22, C23, C25, C27, C29 |
| 4 | 33pF | Capacitor_SMD:C_0603_1608Metric | C5, C19, C20, C21 |
| 4 | MountingHole | CM5IO:MountingHole_2.7mm_M2.5_DIN965 | H2, H3, H6, H8 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C9, C10, C18 |
| 3 | 100nF | PCM_JLCPCB:C_0402 | C26, C28, C30 |
| 3 | 22R | Resistor_SMD:R_0603_1608Metric | R13, R17, R18 |
| 3 | LED Red | LED_SMD:LED_0603_1608Metric | D1, D3, D6 |
| 2 | 15pF | PCM_JLCPCB:C_0402 | C31, C32 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R10 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | Conn_01x03 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical | J3, J6 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 0786463001 | 0786463001:MOLEX_0786463001 | J4 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 100K 1% | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C3 |
| 1 | 10K 1% | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 15K | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 15K 1% | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1uF | PCM_JLCPCB:C_0402 | C24 |
| 1 | 1x4 | Connector_Molex:CONN_SD-43650-006_04_MOL 1x4 | J2 |
| 1 | 2.2K 1% | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 2.2uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 67910-5700 | 0679105700:MOLEX_67910-5700 | J1 |
| 1 | 74LVC1G07SE-7 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | AP22653W6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | AP3441SHE-7B | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP1.05x1.75mm | U8 |
| 1 | ComputeModule5-CM5 | CM5IO:Raspberry-Pi-5-Compute-Module | Module1 |
| 1 | Conn_01x04 | Connector_Molex:CONN_SD-43650-006_04_MOL 1x4 | J7 |
| 1 | Crystal (24.576MHz) | Crystal:S47SMD | Y1 |
| 1 | DALC208SC6 | digikey-footprints:SOT23-6L | CR1 |
| 1 | JST_SHBM04B-SRSS-TB | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J14 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LOGO | Logo Footprints:Ridgeline | G*** |
| 1 | LOGO | Logo Footprints:Alas | G*** |
| 1 | PCM1863DBT | PCM:DBT30_TEX | U1 |
| 1 | USB3_A | Connector_USB:C168717 | J5 |
| 1 | ~ | KiCad:480994000 | MC1 |

256foundation/libreboard
Open Source Bitcoin Mining Control Board

westonb/OV7670-Verilog
Verilog modules required to get the OV7670 camera working


piecol/CM5_MINIMA_REV2
Compact, feature-filled CM5 carrier board

EthanWellsSr/BuggyBot
UHCL senior capstone developing a Raspberry Pi CM5 autonomous car with traffic-sign recognition and sensor integration.

nimitvijayvargee/netherrack
A Compute Module 5 Carrier board to use as a minecraft server!

devisunofficial/HomeBoy
Homeboy is Raspberry-Pi based Game Console(Emulator) which can also act as server( or Backend) for my other projects.

It measures 101.9 × 90.8 mm and has 4 copper layers, 1.6 mm thick.
72 parts, built around the 74LVC1G07SE-7-MS, AP3441SHE-7B, PCM1863DBTR and AP22653W6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jakemwood/alas repository on GitHub, at the commit this page was made from: the board is cm5/CM5IO.kicad_pcb and its schematic cm5/CM5IO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jakemwood before reusing the design.