
Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

Usb pd test pcb is an open-source printed circuit board by JacquesLucke, from the JacquesLucke/usb_pd_test_pcb repository on GitHub. It is a 2-layer board of 34.3 × 22 mm with 9 parts on 14 nets, routed with 72 tracks and 10 vias.
It is built around the CH224K. Its parts include 4 connectors, 3 resistors, 1 capacitor and 1 IC. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x01 | TestPoint:TestPoint_Pad_2.5x2.5mm | J2, J3, J4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | CH224K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
![[DFR1142]Lite Carrier for LattePanda Mu, the printed circuit board in 3D](/embed/boards/LtBrain/MuBook.jpg?size=s&soon)
LtBrain/MuBook
A x86 carrier board for the LattePanda Mu

jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.

Xenii1642/USB-GC2
Meet the new generation of USB-C GameCube Power Board. Now compatible with both 12V and 15V chargers. Two voltages, twice the potential.

eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project

Andreas-Dorfner/Powerline-USB-C
Powerline is a small 3HP Front Entry USB-C eurorack power supply.


It measures 34.3 × 22 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the CH224K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JacquesLucke/usb_pd_test_pcb repository on GitHub, at the commit this page was made from: the board is usb_pd_test_pcb.kicad_pcb and its schematic usb_pd_test_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JacquesLucke before reusing the design.