
ErgoSNM v3 left
siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

PCB for small nrf52840 temperature sensor
Yuzu pcb is an open-source printed circuit board by jacobw, from the jacobw/yuzu-pcb repository on GitHub. It is a 2-layer board of 37 × 23 mm with 28 parts on 44 nets, routed with 158 tracks and 21 vias.
It is built around the E73-2G4M08S1C. Its parts include 4 resistors, 2 capacitors, 2 ICs, 2 diodes and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 32.768Khz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | X2 |
| 1 | 3V | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | A0 | yuzu:TestPoint_THTPad | TP3 |
| 1 | A1 | yuzu:TestPoint_THTPad | TP1 |
| 1 | A4 | yuzu:TestPoint_THTPad | TP2 |
| 1 | A5 | yuzu:TestPoint_THTPad | TP4 |
| 1 | CL | yuzu:TestPoint_THTPad | TP6 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Samtec:FTSH-105-01-L-DV-K | J1 |
| 1 | E73-2G4M08S1C | yuzu:E73(2G4M08S1C) JLCPCB_2 | U1 |
| 1 | GD | yuzu:TestPoint_THTPad | TP5 |
| 1 | IO | yuzu:TestPoint_THTPad | TP7 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RS | yuzu:TestPoint_THTPad | TP9 |
| 1 | SHT45 | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U2 |
| 1 | SW_SPST | yuzu:RKB2SJG250SMTRLFS | SW1 |
| 1 | VD | yuzu:TestPoint_THTPad | TP10 |
| 1 | WO | yuzu:TestPoint_THTPad | TP8 |
| 1 | White | LED_SMD:LED_0603_1608Metric | D2 |
The 25 most common of 28 parts.

siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

weteor/LuttUnLutt
Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder



siderakb/calcite
60/52 keys Kailh Choc V1 low profile switches ortho keyboard

neuman/gripster
thumbdeck — wireless split thumb keyboard (nRF52840 + ZMK, BLE split, i8+-inspired). Layout converged & graded PASS.

ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

Rogger/schneggi-sensor
A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.
It measures 37 × 23 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the E73-2G4M08S1C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jacobw/yuzu-pcb repository on GitHub, at the commit this page was made from: the board is yuzu-pcb.kicad_pcb and its schematic yuzu-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jacobw before reusing the design.