
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

Macropad 2
Totoro pcb macropad is an open-source printed circuit board by jackesche, from the jackesche/totoro-pcb-macropad repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.2 × 79.2 mm with 38 parts on 51 nets, routed with 282 tracks and 12 vias.
It is built around the ATMEGA32U4. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Macropad 2
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | D_Small | random-keyboard-parts:D_SOD-123-Pretty | , , , , , , , , |
| 9 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8, MX9 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | , , , |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | , |
| 2 | 22 ohm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | , |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | , |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | , |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | |
| 1 | ATMEGA32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | |
| 1 | LOGO | totoro-pcb-macropad:toto-img | G*** |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | |
| 1 | USB4085-GF-A_REVA | USB4085-GF-A_REVA:GCT_USB4085-GF-A_REVA | |
| 1 | XTAL_GND | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm_HandSoldering |

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware



evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)



It measures 57.2 × 79.2 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jackesche/totoro-pcb-macropad repository on GitHub, at the commit this page was made from: the board is totoro-pcb-macropad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).