

Stylus piano
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 29
- Nets
- 20
- Pads
- 54
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 23 Mar 2018
- Updated
- 23 Mar 2018
Overview
Stylus piano is an open-source printed circuit board by ja1ydu, from the ja1ydu/kicad_Data repository on GitHub. It is a 2-layer board with 29 parts on 20 nets.
It is built around the LM555N. Its parts include 12 resistors, 11 connectors, 2 capacitors and 1 IC.
Main components
1Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Denken:R_H_5 | R1, R7, R8 |
| 2 | 1k5 | Denken:R_H_5 | R11, R12 |
| 2 | CONN_01X01 | mylib:holepin | P2, P3 |
| 1 | 0.047u | mylib:CP | C1 |
| 1 | 0.1u | mylib:CP | C2 |
| 1 | 1k2 | Denken:R_H_5 | R9 |
| 1 | 200 | Denken:R_H_5 | R6 |
| 1 | 3k3 | Denken:R_H_5 | R2 |
| 1 | 470 | Denken:R_H_5 | R5 |
| 1 | 4k7 | Denken:R_H_5 | R3 |
| 1 | 680 | Denken:R_H_5 | R10 |
| 1 | 6k8 | Denken:R_H_5 | R4 |
| 1 | A6 | Denken:keybord_1 | P6 |
| 1 | B6 | Denken:keybord_1 | P5 |
| 1 | Battery | Denken:BH-321-1P24 | BT1 |
| 1 | C6 | Denken:keybord_1 | P11 |
| 1 | C7 | Denken:keybord_1 | P4 |
| 1 | D6 | Denken:keybord_1 | P10 |
| 1 | E6 | Denken:keybord_1 | P9 |
| 1 | F6 | Denken:keybord_1 | P8 |
| 1 | G6 | Denken:keybord_1 | P7 |
| 1 | LM555N | Housings_DIP:DIP-8_W7.62mm_LongPads | U1 |
| 1 | POT | mylib:pod | RV1 |
| 1 | SPEAKER | mylib:Speaker | SP1 |
| 1 | stylus_pen | mylib:holepin | P1 |
More from ja1ydu/kicad_Data
6- 2 layers30 × 70 mm

- 2 layers37 × 65.5 mm

- 2 layers70 × 70 mm

- 2 layers63.5 × 18 mm

- 2 layers

- 2 layers14 × 48.3 mm

Similar boards
- 2 layers120 × 70 mm

BRNG
valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas
93 parts37 - 2 layers99.8 × 99.8 mm

Soil moisture2x4
acolomitchi/cap-soil-moisture-v2
Files for the capacitive soil moisture (2 kicad projects and 1 arduino sketch with dependencies)
96 parts26 - 2 layers81.3 × 45.7 mm

Sequencer
matiasmicheletto/openscad-oil-pumpjack
3d models and electronics for a variable speed scale pumpjack
6 parts9GPL-3.0 - 2 layers263.1 × 136.6 mm

VIC20Reloaded-1.1-002
RichCini/VIC-20-Reloaded
Reimaging of the original VIC-20cr ("cost-reduced") main board in a smaller footprint.
140 parts5 - 2 layers99.7 × 71.5 mm

- 2 layers49.5 × 49.5 mm

- 2 layers160 × 124.7 mm

- 2 layers38.4 × 28.2 mm

Questions
What parts does the Stylus piano use?
29 parts, built around the LM555N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stylus piano KiCad files?
From the ja1ydu/kicad_Data repository on GitHub, at the commit this page was made from: the board is 電子ピアノ/Stylus piano/stylus piano.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stylus piano design in my own project?
Its repository states no licence, so its author keeps all rights: ask ja1ydu before reusing the design.