Skip to the content
2 layers131 × 221 mmBackplane5, the printed circuit board in 3D

Verious design information related to my home-brewed MN1613 16-bit computer

Size
131 × 221 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
79
Pads
410
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
14 Aug 2024
Updated
31 Dec 2024

Overview

Backplane5 is an open-source printed circuit board by ja1umi, from the ja1umi/MUTIF1613Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 131 × 221 mm with 47 parts on 79 nets.

It is built around the NE556 and BAT43. Its parts include 19 connectors, 10 capacitors, 6 resistors, 3 switches and 2 diodes.

Main components

2

README

README.md

MUTIF1613Project

This project aims to build a vintage PANAFACOM's 16-bit MN1613-based computer. All the project-related files are available here.

Parts

47
QtyValueFootprintReferences
60.1uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1, C2, C3, C4, C5, C6
5Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ15, J16, J17, J18, J19
5Conn_01x14_PinConnector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ9, J10, J11, J12, J13
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
31kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R3, R6
20.01uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC7, C8
2Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1, J2
2SW_Push_SPDT 8MS8P1B05VS2QES0-My_Parts:8MSP0340SW1, SW2
11.5uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC9
110uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC10
11MResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR5
11MPotentiometer_THT:Potentiometer_Bourns_3296W_VerticalRV1
12k2Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR4
14k7Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1BAT43Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
1DC Jack MJ-179PH0-My_Parts:MJ-179PHJ14
1LEDLED_THT:LED_D5.0mmD1
1LOGO0-My_Parts:silk_iconG***
1NE556Package_DIP:DIP-14_W7.62mm_LongPadsU1
1SLOT 1Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_VerticalJ3
1SLOT 2Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_VerticalJ4
1SLOT 3Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_VerticalJ5
1SLOT 4Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_VerticalJ6
1SLOT 5Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_VerticalJ7
1SW_SPDT_321 2MS1T1B4M7QES0-My_Parts:2MS1T1B4M7QESSW3
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ8

More from ja1umi/MUTIF1613Project

3
  • 2 layers155 × 114 mm7segled, the printed circuit board in 3D

    7segled

    ja1umi/MUTIF1613Project

    Verious design information related to my home-brewed MN1613 16-bit computer

    82 parts3MIT
  • 2 layers155 × 114 mmMutif1613, the printed circuit board in 3D

    Mutif1613

    ja1umi/MUTIF1613Project

    Verious design information related to my home-brewed MN1613 16-bit computer

    60 parts3MIT
  • 2 layers155 × 114 mmDpram7134, the printed circuit board in 3D

    Dpram7134

    ja1umi/MUTIF1613Project

    Verious design information related to my home-brewed MN1613 16-bit computer

    55 parts3MIT

Similar boards

  • 4 layers184.2 × 169.5 mmSB mini II, the printed circuit board in 3D

    SB mini II

    simonboak/SB-mini-II

    A homebrewed Apple II clone

    97 parts76MIT
  • 2 layers100 × 77.5 mmDiskII, the printed circuit board in 3D

    DiskII

    btb/DiskII

    An Apple Disk II controller clone using standard EPROMs

    35 parts71Apache-2.0
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 4 layers163 × 174.4 mmGd rev3b, the printed circuit board in 3D

    Gd rev3b

    baldengineer/Mega-IIe

    Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!

    440 parts33MIT
  • 4 layers330.2 × 215.9 mmRetroii, the printed circuit board in 3D

    Retroii

    jonthomasson/retroii

    Retro ][ is a 6502 based computer based off of the Apple ][.

    302 parts33
  • 2 layers134.6 × 106.4 mmRenovation ssi 2001, the printed circuit board in 3D

    Renovation ssi 2001

    roybaer/renovation_ssi_2001

    Innovation SSI-2001 replica that can be built without vintage components

    95 parts26
  • 2 layers70.8 × 108.5 mmSequencer, the printed circuit board in 3D

    Sequencer

    sphawes/diySynth

    39 parts14
  • 2 layers88.9 × 63.5 mmAlpenglowSMTGarden, the printed circuit board in 3D

    AlpenglowSMTGarden

    AlpenglowIndustries/Alpenglow_SMTGarden_PCB

    A fun kit with lots of blinky lights and 555 timers that gives you lots of practice with different sizes of surface mount components

    155 parts11MIT

Questions

How big is the Backplane5 PCB?

It measures 131 × 221 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Backplane5 use?

47 parts, built around the NE556 and BAT43. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Backplane5 KiCad files?

From the ja1umi/MUTIF1613Project repository on GitHub, at the commit this page was made from: the board is backplane5/backplane5.kicad_pcb and its schematic 7segled/7segled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Backplane5 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).