

Clock pcb
- Size
- 28.5 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 42
- Pads
- 83
- Tracks, vias
- 96, 49
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Oct 2023
- Updated
- 10 Mar 2025
Overview
Clock pcb is an open-source printed circuit board by IvarNilsson, from the IvarNilsson/MicroMouse repository on GitHub. It is a 2-layer board of 28.5 × 28.5 mm with 12 parts on 42 nets, routed with 96 tracks and 49 vias.
It is built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. Its parts include 4 capacitors, 2 resistors, 2 ICs and 1 fuse. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
2ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMicroMouse
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Ivar_footprint_library:IVAR_1206_SMD_R | R1, R2 |
| 1 | 0.1uF | Ivar_footprint_library:IVAR_1206_SMD_C | C2 |
| 1 | 0.2A | Ivar_footprint_library:IVAR_1206_SMD_FUSE | F1 |
| 1 | 10u | Ivar_footprint_library:IVAR_1206_SMD_C | C3 |
| 1 | 10uF | Ivar_footprint_library:IVAR_1206_SMD_C | C1 |
| 1 | 1u | Ivar_footprint_library:IVAR_1206_SMD_C | C4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x02_Pin | Ivar_footprint_library:IVAR_MOTION_SENS | SW-502D1 |
| 1 | Conn_01x04_Pin | Ivar_footprint_library:IVAR_OLED_I2C | Display1 |
| 1 | Conn_01x05_Pin | Ivar_footprint_library:IVAR_Micro_USB_breakout_board_5pin | Mico_USB_Breakout1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
More from IvarNilsson/MicroMouse
2- 2 layers60 × 90 mm

- 2 layers31.6 × 51.8 mm

Similar boards
- 2 layers86 × 54 mm

- 2 layers55 × 100 mm

- 2 layers110 × 100 mm

PidginTranslator
DevMubarak1/PidginTranslator
Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.
14 parts21MIT - 4 layers58.5 × 85.5 mm

- 2 layers50.6 × 71.1 mm

Open ESPilot
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
109 parts18CERN-OHL-W-2.0 - 4 layers102 × 100 mm

Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 2 layers156 × 66 mm

Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 4 layers100 × 100 mm

Questions
How big is the Clock pcb PCB?
It measures 28.5 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clock pcb use?
12 parts, built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock pcb KiCad files?
From the IvarNilsson/MicroMouse repository on GitHub, at the commit this page was made from: the board is pcb/clock/clock_pcb/clock_pcb.kicad_pcb and its schematic pcb/all_main/main_pcb/main_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask IvarNilsson before reusing the design.