Skip to the content
2 layers116.8 × 108 mmRTC, the printed circuit board in 3D
Size
116.8 × 108 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
16
Pads
88
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
19 Nov 2023
Updated
23 Nov 2024

Overview

RTC is an open-source printed circuit board by IvanZaytsev2005, from the IvanZaytsev2005/RTC_Sochi repository on GitHub. It is a 2-layer board of 116.8 × 108 mm with 14 parts on 16 nets.

It is built around the L298N. Its parts include 9 connectors and 5 ICs.

Main components

1

README

README.md

RTC_Sochi

Parts

14
QtyValueFootprintReferences
2Servo1Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ6, J10
2~Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU3, U4
1Encoder LConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ4
1Encoder RConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ2
1L298NUser_Library:L298_ModuleU2
1Power 12VConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ11
1Rasberry_to_stmConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1
1Servo2Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ7
1Servo3Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ8
1Servo4Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ9
1~BlackPill:YAAJ_BlackPill_2U1
1~User_Library:UBEC_POWERU5

Similar boards

  • 2 layers76.1 × 85 mmFlypi, the printed circuit board in 3D

    Flypi

    amchagas/Flypi

    This is the repository for the flypi project

    45 parts88GPL-2.0
  • 4 layers85 × 54 mmPECDR, the printed circuit board in 3D

    PECDR

    pedro-ibs/trekking

    Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”

    68 parts9
  • 2 layers66.3 × 34.3 mmC64PSUv3, the printed circuit board in 3D

    C64PSUv3

    FabioNMI/C64PSU

    A low-cost, lightweight and very reliable power supply for the Commodore 64

    37 parts2
  • 2 layersRoboForce, the printed circuit board in 3D

    RoboForce

    Khuzhin06/RoboForce

    Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.

    3 parts2
  • 2 layersRP2040 minimal, the printed circuit board in 3D

    RP2040 minimal

    ltherreraro/Wally

    Recolector de basura espacios cerrados usando esp32

    58 parts2
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers99.5 × 99.5 mmSchematicKiCadProyect, the printed circuit board in 3D

    SchematicKiCadProyect

    dduarteCE/Robot-vacuum

    Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.

    42 parts1MIT
  • 2 layers62.3 × 42.9 mmL298N, the printed circuit board in 3D

    L298N

    engnourmo/L298N-PCB-

    L298N (schematic and layout)

    27 parts1

Questions

How big is the RTC PCB?

It measures 116.8 × 108 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RTC use?

14 parts, built around the L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RTC KiCad files?

From the IvanZaytsev2005/RTC_Sochi repository on GitHub, at the commit this page was made from: the board is RTC/RTC.kicad_pcb and its schematic RTC/LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RTC design in my own project?

Its repository states no licence, so its author keeps all rights: ask IvanZaytsev2005 before reusing the design.