2 layers
6 layers
Micro
IslamHUFE/CanSat1under construction
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 65
- Pads
- 180
- Tracks, vias
- 525, 47
- Pours
- 73
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 May 2026
- Updated
- 6 Sep 2026
Overview
Micro is an open-source printed circuit board by IslamHUFE, from the IslamHUFE/CanSat repository on GitHub. It is a 6-layer board with 34 parts on 65 nets, routed with 525 tracks and 47 vias.
It is built around the W25Q128JVPIQ and TPD4E05U06DQAR. Its parts include 16 capacitors, 10 connectors, 4 ICs and 3 resistors. It belongs with the STM32 boards of this library.
Main components
2
W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH
TPD4E05U06DQAR
USON-10-40℃~+125℃ 0.5pF 10nA 14V 2.5A@8/20us 40W@8/20us 5.5V 6.5V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD Protection Devices
README
README.mdCanSat
This is the repository for the project of its ambitious owner.
I hope the effort put into this will not be wasted.
Electrical and microcontroller system
CanSat
Base station
Mechnical
CanSat
Base station
Documentation
Owner
LICENSE
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | C | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C6, C8, C10, C12, C14, C16 |
| 8 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5, J6, J7, J8, J9, J10 |
| 7 | C_Polarized | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C4, C5, C7, C9, C11, C13, C15 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | FerriteBead | Inductor_SMD:L_Walsin_WLFM201609x | FB1 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SX1276 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | U4 |
| 1 | Screw_Terminal_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | TPD4E05U06DQA | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U3 |
Questions
What parts does the Micro use?
34 parts, built around the W25Q128JVPIQ and TPD4E05U06DQAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Micro KiCad files?
From the IslamHUFE/CanSat repository on GitHub, at the commit this page was made from: the board is microcontroller/micro/micro.kicad_pcb and its schematic charging and protection/CP/CP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Micro design in my own project?
Its repository states no licence, so its author keeps all rights: ask IslamHUFE before reusing the design.
More from IslamHUFE/CanSat
2- 2 layers62.6 × 23.4 mm
Similar boards
- 2 layers24.4 × 35.8 mm
- 4 layers40 × 9 mm
UDB S
Unified-Daughterboard/UDB-S
Narrow variant unified daughterboards for custom keyboard designers and users
11 parts82MIT - 4 layers20.6 × 51.1 mm
- 2 layers60 × 30 mm
- 4 layers18 × 16.5 mm
UDB
Unified-Daughterboard/UDB-C-EZM
For more details on the Unified Daughterboard project, see the main website.
13 parts45MIT - 8 layers150 × 90 mm
- 4 layers108 × 50 mm
- 4 layers315 × 147.2 mm
