2 layers96.6 × 82.8 mm
2 layers48 × 60 mm
SmartTempSensor
ishankaneria99/SmartTemperatureSensorDHT22 sensor using Arduino commands to send data towards a python script that utilizes a anthropic agent to run basic commands such as monitoring the temperature, and turning on a mini fan blade hooked up to a 130 DC motor.
- Size
- 48 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 39
- Pads
- 52
- Tracks, vias
- 20, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Jul 2026
- Updated
- 14 Sep 2026
Overview
SmartTempSensor is an open-source printed circuit board by ishankaneria99, from the ishankaneria99/SmartTemperatureSensor repository on GitHub. It is a 2-layer board of 48 × 60 mm with 6 parts on 39 nets, routed with 20 tracks and 0 vias.
It is built around the DHT11. Its parts include 3 resistors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdSmartTemperatureSensor
DHT22 sensor using an ESP32 microcontroller to send data towards a python script that utilizes a anthropic agent to run basic commands such as monitoring the temperature, and turning on a mini fan blade hooked up to a 130 DC motor.
Referring to "image.jpeg" the wiring while "rudimentary" shows 2 LEDs that light based on a set temperature threshold. When the user prompts the agent to check the temperature, based on the temperature a fan is turned on automatically (RED led is turned on). There are also commands the user can give to enable or disable the fan regardless of temperature.
7/27/26 -> Created physical layout and original code where agent talks through a python shell
7/28/26 -> Utilized streamlit to create a cleaner layout to send commands to the agent
7/30/26 -> Improved layout of streamlit app
8/2/26 -> Replaced Arduino with ESP32 and included KiCad Gerber file of the circuit on a PCB (did not include fan).
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.330K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | ESP32 CP2102 | esp32:ESP32_38Pin (1) | U1 |
| 1 | LED_RKGB | LED_THT:LED_D5.0mm-4_RGB | D1 |
Questions
How big is the SmartTempSensor PCB?
It measures 48 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SmartTempSensor use?
6 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SmartTempSensor KiCad files?
From the ishankaneria99/SmartTemperatureSensor repository on GitHub, at the commit this page was made from: the board is SmartTempSensor.kicad_pcb and its schematic SmartTempSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SmartTempSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask ishankaneria99 before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5