4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0
4 layers59.8 × 39.4 mm
6 key macro pad V1
ishaan-tam/MacroPad- Size
- 59.8 × 39.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 69
- Pads
- 228
- Tracks, vias
- 434, 69
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Nov 2023
- Updated
- 23 Nov 2023
Overview
6 key macro pad V1 is an open-source printed circuit board by ishaan-tam, from the ishaan-tam/MacroPad repository on GitHub. It is a 4-layer board of 59.8 × 39.4 mm with 53 parts on 69 nets, routed with 434 tracks and 69 vias.
It is built around the RP2040, W25Q128JVSIQ and 74LVC2T45DC. Its parts include 11 capacitors, 11 resistors, 7 diodes, 4 ICs and 3 connectors. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
74LVC2T45DC
VSSOP-8-0.5mm-40℃~+125℃ 1 1.2V~5.5V 1.2V~5.5V 2 420Mbps Bidirectional Power-Off Protection Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
README
README.mdMacroPad
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | choc_SK6812MINI-E | PCM_marbastlib-choc:LED_choc_6028R | LED1, LED2, LED3, LED4, LED5, LED6 |
| 6 | choc_SW_solder | PCM_marbastlib-choc:SW_choc_v1_1u | CH7, CH8, CH9, CH10, CH11, CH12 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C11 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 5k1 | Resistor_SMD:R_0402_1005Metric | R4, R8, R9 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R7, R10 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | BOOT1, RST1 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 74LVC2T45DC | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Fuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | RED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U1 |
Questions
How big is the 6 key macro pad V1 PCB?
It measures 59.8 × 39.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 6 key macro pad V1 use?
53 parts, built around the RP2040, W25Q128JVSIQ and 74LVC2T45DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 6 key macro pad V1 KiCad files?
From the ishaan-tam/MacroPad repository on GitHub, at the commit this page was made from: the board is 6_key_macro_pad_V1.kicad_pcb and its schematic 6_key_macro_pad_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 6 key macro pad V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ishaan-tam before reusing the design.
Similar boards
- 4 layers95 × 60 mm
- 2 layers42 × 67 mm
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542