

Right Angle Plug
- Size
- 30 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 4
- Pads
- 16
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Jul 2026
- Updated
- 26 Jul 2026
Overview
Right Angle Plug is an open-source printed circuit board by irampton, from the irampton/LED_PCBs_V2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 30 mm with 3 parts on 4 nets.
It is built around the PJ-002BH and PZ2.54-2X5P-H25.
Main components
2Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | PJ-002BH | Schrune:PJ_002BH | DC1, DC2 |
| 1 | PZ2.54-2X5P-H25 | Schrune:PZ2_54_2X5P_H25 | H1 |
More from irampton/LED_PCBs_V2
7- 2 layers75 × 30 mm

- 2 layers60 × 52 mm

- 2 layers60 × 52 mm

- 2 layers60 × 60 mm

- 2 layers53 × 30 mm

- 2 layers19 × 61 mm

- 2 layers30 × 30 mm

Similar boards
- 4 layers80 × 80 mm

03-导入EasyEDA
superfansizhe-beep/tscircuit-stm32f302-board
STM32F302R8T6 考核板 —— 用 tscircuit 以 TypeScript 描述原理图与 PCB,9 页分页、4 层板、含完整交付物
84 parts - 2 layers64.8 × 50.5 mm

- 2 layers188 × 145.4 mm

- 6 layers92.6 × 69.4 mm

Usb hub 2
yedidia-sisay/usb3-multiport-hub
An open-source USB 3.2 Gen 2 (10 Gbps) multiport hub & docking station.
230 parts - 4 layers59.7 × 70 mm

- 2 layers

- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0
Questions
How big is the Right Angle Plug PCB?
It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Right Angle Plug use?
3 parts, built around the PJ-002BH and PZ2.54-2X5P-H25. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Right Angle Plug KiCad files?
From the irampton/LED_PCBs_V2 repository on GitHub, at the commit this page was made from: the board is right-angle-plug/build/Right Angle Plug.kicad_pcb and its schematic 2x2x4/build/2x2x4-LED-Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Right Angle Plug design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).