

Battery and DCDC
Proyecto final de grado
- Size
- 64.8 × 50.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 30
- Pads
- 122
- Tracks, vias
- 275, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 May 2026
- Updated
- 16 Jun 2026
Overview
Battery and DCDC is an open-source printed circuit board by Killerbee12, from the Killerbee12/TFG-UPM repository on GitHub. It is a 2-layer board of 64.8 × 50.5 mm with 49 parts on 30 nets, routed with 275 tracks and 40 vias.
It is built around the PJ-002BH. Its parts include 15 connectors, 11 resistors, 10 capacitors, 3 diodes and 2 inductors. It belongs with the power boards of this library.
Main components
1README
README.mdSistema de Alimentación Portátil para Montura de Telescopio
Trabajo Fin de Grado — Grado en Ingeniería Electrónica de Comunicaciones
ETSIST · Universidad Politécnica de Madrid (UPM)
De qué va este proyecto
Cualquiera que haya hecho astrofotografía o astronomía visual en campo abierto sabe que la energía es un problema. Las monturas motorizadas, las cámaras y los accesorios necesitan alimentación estable durante horas, normalmente lejos de cualquier enchufe. La solución clásica es cargar con una batería de plomo-ácido, que pesa, ocupa y no te dice cuánta carga le queda realmente.
Este TFG propone una alternativa: un sistema de alimentación portátil basado en baterías LiFePO4 (12.8V, 7.5Ah), más ligeras y seguras que el plomo, con electrónica dedicada para monitorizar el estado de carga real, gestionar la recarga y entregar una tensión de salida estable a la montura.
Qué hace el sistema
- Mide la carga real de la batería usando un fuel gauge (BQ34Z100-G1) con tecnología Impedance Track, que compensa el envejecimiento de las celdas y mide temperatura con un termistor NTC.
- Gestiona la recarga con un cargador buck-boost BQ25792, compatible con USB-PD 3.0.
- Estabiliza la tensión de salida mediante un convertidor buck-boost TPS551892-Q1, preparado para los picos de corriente que generan los motores de la montura.
- Coordina todo desde un microcontrolador STM32F411 programado con FreeRTOS, que lee la telemetría por I2C y gestiona las tareas del sistema de forma concurrente.
Diseño hardware
El hardware está diseñado en KiCad y separado en PCBs independientes para aislar ruidos electromagnéticos y facilitar la depuración:
- Battery Gauge (BMS) — Circuito del BQ34Z100-G1 con divisor de tensión, shunt de corriente y sensor térmico.
- Battery Charger — Circuito del BQ25792 con la electrónica de carga.
- Bloque de control — MCU STM32F411, buses I2C y lectura de telemetría.
Estructura del repositorio
├── Anteproyecto/ Documentos del anteproyecto (borradores, versión firmada, ejemplos y revisiones del tutor)
├── Archivos/ Datasheets de referencia consultados durante el diseño
├── Inventario/ Datasheets organizados por tipo de componente:
│ ├── Bateria/ Pack LiFePO4 12.8V 7.5Ah
│ ├── Battery_Charger/ BQ25792, BQ25690, LTC4020, etc.
│ ├── Battery_Gauge/ BQ34Z100-G1, BQ34110, BQ78350, etc.
│ ├── DC-DC_BuckBoost/ TPS551892-Q1, TPS55285, TPS63070, etc.
│ ├── Microcontrolador/ STM32F411 Discovery
│ ├── Bobina/
│ ├── Conectores/
│ ├── Diodos-zener/
│ ├── Resistencias/
│ └── Transistores/
├── Notas/ Notas y documentación del proyecto (memoria, apuntes)
├── PCB/ Diseños de PCB en KiCad
│ ├── Prototipo_2.0/ Prototipo inicial del battery gauge
│ └── Proyecto/ Diseños finales
│ ├── PCB_BatteryCharger/
│ └── PCB_BatteryGaulge/
├── STM32_project/ Firmware en C (STM32CubeIDE + FreeRTOS)
└── README.mdHerramientas utilizadas
| Área | Herramienta |
|---|---|
| Esquemáticos y PCB | KiCad |
| Firmware | STM32CubeIDE (HAL + FreeRTOS) |
| Microcontrolador | STM32F411 Discovery |
| Documentación | Word / PDF |
Estado del proyecto
Este repositorio recoge todo el proceso de desarrollo del TFG: desde los primeros borradores del anteproyecto hasta los diseños de PCB y el firmware. Es un proyecto en progreso.
Nizar El Azeouzi Amine — ETSIST, Universidad Politécnica de Madrid
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4, J5, J7, J9 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J8, J11, J14 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J10, J15, J16 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C4, C10 |
| 3 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R9 |
| 3 | MountingHole_4.3mm_M4 | MountingHole:MountingHole_4.3mm_M4 | M1, M1, M1 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5 |
| 2 | D_Schottky | Diode_SMD:D_SMB | D1, D2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_3.0x3.0mm | TP1, TP2 |
| 2 | WE-PD_7332 | WE-PD_7332:WE-PD_7332 | L1, L2 |
| 1 | 0.05 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 118k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 174k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 330k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 33pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 35.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 820pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 90.9k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D3 |
| 1 | LT3652IMSE_TRPBF | LT3652IMSE_TRPBF:MSOP-12_MSE | U1 |
| 1 | LTC3115EFE-1_TRPBF | LTC3115EFE-1_TRPBF:CONV_LTC3115EFE-1_TRPBF | PS1 |
| 1 | PJ-002BH | PJ-002BH:CUI_PJ-002BH | J12 |
| 1 | Thermistor_NTC | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | TH1 |
More from Killerbee12/TFG-UPM
4- 2 layers60.8 × 50.3 mm

- 2 layers68.5 × 38 mm

- 2 layers53.3 × 30.5 mm

- 2 layers53.8 × 42.8 mm

Similar boards
- 2 layers188 × 145.4 mm

- 6 layers92.6 × 69.4 mm

Usb hub 2
yedidia-sisay/usb3-multiport-hub
An open-source USB 3.2 Gen 2 (10 Gbps) multiport hub & docking station.
230 parts - 4 layers59.7 × 70 mm

- 2 layers60 × 60 mm

- 2 layers

- 2 layers173 × 122.5 mm

- 2 layers85.1 × 49.8 mm

- 2 layers50 × 90 mm

Questions
How big is the Battery and DCDC PCB?
It measures 64.8 × 50.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Battery and DCDC use?
49 parts, built around the PJ-002BH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Battery and DCDC KiCad files?
From the Killerbee12/TFG-UPM repository on GitHub, at the commit this page was made from: the board is PCB/Prototipo_2.0/BatteryCharger_and_DCDCBuckBoost/Battery_and_DCDC.kicad_pcb and its schematic PCB/Prototipo_2.0/BatteryCharger_and_DCDCBuckBoost/Battery_and_DCDC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Battery and DCDC design in my own project?
Its repository states no licence, so its author keeps all rights: ask Killerbee12 before reusing the design.