
Mini BT Pcb-328P
d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb
KiCon 2023 Asia Badge © 2023 by Yang Hongbo is licensed under CC BY 4.0
KiConSZ2023 is an open-source printed circuit board by iotpi, from the iotpi/KiCon2023Asia-Badge repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 60 mm with 114 parts on 122 nets, routed with 1,039 tracks and 180 vias.
It is built around the N32L406RBL7, ME2188C33M5G and SY8088IAAC, with the PUSB3FR4, SK2302AAT and XL-1615RGBC-RF among its other parts. Its parts include 42 resistors, 18 capacitors, 16 transistors, 12 diodes and 6 connectors.
KiCon 2023 Asia Badge © 2023 by Yang Hongbo is licensed under CC BY 4.0
The firmware is licensed under GNU GPL 3.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 127R | Resistor_SMD:R_0402_1005Metric | R11, R12, R14, R15, R17, R18, R20, R21, R23, R24, R26, R27, R29, R30, R32, R33 +8 |
| 12 | 383R | Resistor_SMD:R_0402_1005Metric | R4, R7, R10, R13, R16, R19, R22, R25, R28, R31, R34, R37 |
| 12 | SK2302AAT | IotPi_Package_TO_SOT_SMD:SOT-523_no-silkscreen | Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 12 | XL-1615RGBC-RF | IotPi_LED:XL-1615RGBC_no-silkscreen | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C9, C14 |
| 4 | SK2302AAT | Package_TO_SOT_SMD:SOT-523 | Q2, Q3, Q4, Q17 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C18, C19 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R148, R149 |
| 2 | Conn_02x03_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J4, J5 |
| 2 | SKRPACE010 | IotPi_Switch:SKRPACE010 | SW2, SW3 |
| 2 | SMT_Mark | IotPi_TestPoints_Marks:SMT_Mark | MK1, MK2 |
| 1 | 100nF ±10% 16V | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 102K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R151 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1uF 16V | Resistor_SMD:R_0402_1005Metric | C16 |
| 1 | 2.2u | Inductor_SMD:L_Sunlord_SWPA3015S | L2 |
| 1 | 22p | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | 22u | Inductor_SMD:L_Sunlord_SWPA4012S | L3 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 453K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R150 |
| 1 | 47u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C13 |
| 1 | BM20B(0.6)-10DS-0.4V | IotPi_Connector_Hirose:BM20B(x)-10DS-0.4V | J6 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | LOGO | IotPi_Logo:ShenZhen2023_Logo | G*** |
| 1 | ME2188C33M5G | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | N32L406RBL7 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | PUSB3FR4 | IotPi_Package_DFN_QFN:Nexperia_DFN2510A-10 | U3 |
| 1 | SW_SPDT | IotPi_Switch:MS-22D28-G020 | SW4 |
| 1 | SY8088IAAC | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Single or Dual AA Battery | Battery:BatteryHolder_Keystone_2460_1xAA | BT2 |
| 1 | USB_C_Receptacle_USB2.0 | IotPi_Connector_USB:USB_C_Receptacle_Dealon_USB-TYPE-C-019_6P_TopMnt_Horizontal | J3 |
| 1 | XL2EL89COI-111YLC-8M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
The 111 most common of 114 parts.

d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb

keycard-tech/keycard-shell
Modular, fully open hardware wallet



vicharak-in/Vaaman_LVDS_GPIO_Expansion_Board
GPIO Lvds extension hat for Vicharak's Vaaman 0.1


VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

It measures 100 × 60 mm and has 4 copper layers, 1.02 mm thick.
114 parts, built around the N32L406RBL7, ME2188C33M5G, SY8088IAAC and PUSB3FR4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the iotpi/KiCon2023Asia-Badge repository on GitHub, at the commit this page was made from: the board is hw/KiConSZ2023.kicad_pcb and its schematic hw/Boost_DCDC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).