

Underglow3
hardware support for underglow3
- Size
- 81.2 × 100.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 242
- Nets
- 237
- Pads
- 746
- Tracks, vias
- 1,441, 310
- Pours
- 60
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Feb 2024
- Updated
- 24 Jul 2024
Overview
Underglow3 is an open-source printed circuit board by ConnorRigby, from the ConnorRigby/nerves_system_underglow3 repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 81.2 × 100.2 mm with 242 parts on 237 nets, routed with 1,441 tracks and 310 vias.
It is built around the T113-S3, AP6212 and SN65HVD230DR, with the MCP1416T-E/OT(LX), SY8088IAAC and SCT2650STER among its other parts. Its parts include 83 resistors, 68 capacitors, 15 ICs, 15 transistors and 6 diodes.
Main components
12T113-S3
ELQFP-128ELQFP-128 Microcontrollers (MCU/MPU/SOC) ROHSAllwinner TechMicrocontrollers (MCU/MPU/SOC)AP6212
QFN-44(12x12)-30℃~+85℃ -90dBm 16dBm 2.4GHz 3V~3.8V Bluetooth4.1、IEEE802.11b/g/n UART、SDIO、PCM QFN-44(12x12) WiFi Modules ROHSAMPAK TechWiFi ModulesSN65HVD230DR
SOP-8CAN TransceiversTokmasMCP1416T-E/OT(LX)
SOT-23-5-40℃~+85℃ -、- 1 1.5A 1.5A 10ns 10ns 15ns 2.4V 20ns 4.5V~18V 800mV Low Side MOSFET SOT-23-5 Gate Drivers ROHSlingxingicGate DriversSY8088IAAC
SOT-23-5-40℃~+85℃@(TA) 1 1.5MHz 1A 2.5V~5.5V 50uA Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHS矽力杰silergyDC-DC ConvertersSCT2650STER
ESOP-8-40℃~+150℃ 1 100kHz~1.2MHz 175uA 4.5V~60V 5A 800mV~57V Adjustable Buck Buck Built-in ESOP-8 DC-DC Converters ROHSSCTDC-DC ConvertersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)ATECC608A-MAHDA-S
UDFN-8(2x3)-40℃~+85℃ 150nA 2V~5.5V ECC、SHA-256、AES-128 I2C UDFN-8(2x3) Security Verification / Encryption ICs ROHSMicrochip TechnologySecurity Verification / Encryption ICsCL05B104KB54PNC
0402100nF 50V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT0402CG220J500NT
040222pF 50V C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMTAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSI2302-TP
SOT-23-55℃~+150℃ 1 N-channel 1.25W 1.2V 10nC@4.5V 20V 237pF 3A 72mΩ@4.5V SOT-23 MOSFETs ROHSMicro Commercial ComponentsMOSFETs
README
README.mdConeRGB Underglow3 Nerves Support
This is the base Nerves System configuration for ConeRGB V3.

| Feature | Description |
|---|---|
| CPU | 1.2 GHz ARM Cortex-A7 Dual-Core |
| Memory | 128 MB DDR3 |
| Storage | MicroSD |
| Linux kernel | 6.1 w/ patches |
| IEx terminal | UART ttyS0 |
| GPIO, I2C, SPI | Yes - Elixir Circuits |
| Display | No |
| ADC | No |
| PWM | 8 channels |
| UART | ttyS0 |
| Camera | No |
| Ethernet | No |
| WiFi | Onboard WiFi |
| RTC | No |
| HW Watchdog | Yes |
Special Thanks
Most of the hard work in this repo was gleamed from YuzukiSBC
Parts
242| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nf | Capacitor_SMD:C_0402_1005Metric | C201, C202, C205, C211, C212, C214, C215, C220, C221, C222, C227, C229, C231, C232, C234, C235 +8 |
| 21 | 1k | Resistor_SMD:R_0402_1005Metric | R301, R302, R303, R316, R317, R318, R319, R320, R326, R327, R330, R332, R408, R411, R427, R428 +5 |
| 19 | 10uF | Capacitor_SMD:C_0603_1608Metric | C213, C228, C237, C302, C303, C308, C311, C312, C316, C318, C403, C404, C407, C408, C409, C412 +3 |
| 12 | 100k | Resistor_SMD:R_0402_1005Metric | R201, R203, R204, R205, R206, R219, R220, R221, R222, R419, R450, R456 |
| 10 | 0R | Resistor_SMD:R_0402_1005Metric | R210, R211, R213, R214, R216, R304, R305, R457, R460, R461 |
| 10 | 100k 1% | Resistor_SMD:R_0402_1005Metric | R309, R310, R314, R321, R322, R325, R329, R331, R333, R334 |
| 10 | 47k | Resistor_SMD:R_0402_1005Metric | R401, R402, R403, R404, R451, R452, R453, R454, R455, R458 |
| 7 | 22pF | Capacitor_SMD:C_0402_1005Metric | C203, C204, C305, C402, C405, C410, C414 |
| 6 | 22R | Resistor_SMD:R_0402_1005Metric | R202, R223, R306, R323, R324, R328 |
| 6 | MCP1416T-E/OT | Package_TO_SOT_SMD:SOT-23-5 | U304, U305, U306, U307, U308, U309 |
| 6 | SI2302-TP | Package_TO_SOT_SMD:SOT-23-3 | Q309, Q310, Q311, Q319, Q320, Q321 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C304, C406, C411, C413 |
| 4 | 2.2uF | Resistor_SMD:R_0402_1005Metric | C217, C218, C219, C233 |
| 4 | SI2302-TP | Package_TO_SOT_SMD:SOT-23 | Q302, Q303, Q305, Q306 |
| 3 | 10uF 16V | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C313, C314, C315 |
| 3 | 150k | Resistor_SMD:R_0402_1005Metric | R415, R417, R418 |
| 3 | AO3419 | Package_TO_SOT_SMD:SOT-23W | Q301, Q304, Q307 |
| 3 | SS210 | Diode_SMD:D_SMA | D304, D305, D306 |
| 2 | 100nF | Resistor_SMD:R_0402_1005Metric | C427, C428 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R307, R311 |
| 2 | 1uF | Resistor_SMD:R_0402_1005Metric | C230, C301 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R217, R218 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R308, R312 |
| 2 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L302, L403 |
| 2 | 2.2uH | Inductor_LCSC:IND-SMD_L2.0-W1.6_VLS201610CX-150M | L401, L402 |
| 2 | 450mΩ ±25% 600Ω@100MHz | Inductor_SMD:L_0603_1608Metric | FB302, FB403 |
| 2 | G*** | kibuzzard-65FE522B | kibuzzard-65FE522B, kibuzzard-65FE522B |
| 2 | G*** | kibuzzard-65F09D1C | kibuzzard-65F09D1C, kibuzzard-65F09D1C |
| 2 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP, TP |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D408, D409 |
| 2 | MMBT5551 | Package_TO_SOT_SMD:SOT-23 | Q308, Q312 |
| 2 | SY8088IAAC | Package_TO_SOT_SMD:SOT-23-5 | U402, U403 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U302, U303 |
| 2 | gnd | TestPoint:TestPoint_Pad_D1.0mm | TP302, TP304 |
| 1 | G6K-2F-Y DC12 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K301 |
| 1 | +3.3V | TestPoint:TestPoint_Pad_D1.0mm | TP303 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.0mm | TP301 |
| 1 | 0R | Inductor_SMD:L_0402_1005Metric | L405 |
| 1 | 18.7k 1% | Resistor_SMD:R_0402_1005Metric | R315 |
| 1 | 220nF | Capacitor_SMD:C_0603_1608Metric | C309 |
| 1 | 240R | Resistor_SMD:R_0402_1005Metric | R207 |
| 1 | 24Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y201 |
| 1 | 26Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y401 |
| 1 | 3.3nF | Capacitor_SMD:C_0402_1005Metric | C306 |
| 1 | 33k 1% | Resistor_SMD:R_0402_1005Metric | R313 |
| 1 | 680k | Resistor_SMD:R_0402_1005Metric | R414 |
| 1 | 68pF | Capacitor_SMD:C_0603_1608Metric | C310 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R416 |
| 1 | 8.2uH 3.7A | Inductor_LCSC:IND-SMD_L7.0-W6.6_FXL0630 | L301 |
| 1 | AGND | TestPoint:TestPoint_Pad_D1.0mm | TP219 |
| 1 | AP6212 | Module_WiFi_BT:RL-SM02BD(RTL8723BS) | U401 |
| 1 | ATECC608A-MAHDA | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U203 |
| 1 | BWU.FL-IPEX1 | Antenna_LCSC:IPEX-SMD_BWIPX-1-001E | ANT401 |
| 1 | Delphi_Sicma_24 | Connector_Aptiv:Delphi_Sicma_24_Black | J301 |
| 1 | G*** | kibuzzard-65FEF408 | kibuzzard-65FEF408 |
| 1 | G*** | kibuzzard-65F09B04 | kibuzzard-65F09B04 |
| 1 | G*** | kibuzzard-65F09CF9 | kibuzzard-65F09CF9 |
| 1 | G*** | kibuzzard-65F09B16 | kibuzzard-65F09B16 |
| 1 | G*** | kibuzzard-65F09D0C | kibuzzard-65F09D0C |
| 1 | G*** | kibuzzard-65FEF020 | kibuzzard-65FEF020 |
| 1 | G*** | kibuzzard-65FEF568 | kibuzzard-65FEF568 |
| 1 | G*** | kibuzzard-65F09C6B | kibuzzard-65F09C6B |
| 1 | G*** | kibuzzard-65F09B40 | kibuzzard-65F09B40 |
| 1 | G*** | kibuzzard-65F09AC9 | kibuzzard-65F09AC9 |
| 1 | G*** | kibuzzard-65F09B27 | kibuzzard-65F09B27 |
| 1 | G*** | kibuzzard-65FE52BD | kibuzzard-65FE52BD |
| 1 | G*** | kibuzzard-65FE521F | kibuzzard-65FE521F |
| 1 | G*** | kibuzzard-65F09B51 | kibuzzard-65F09B51 |
| 1 | G*** | kibuzzard-65F09CD2 | kibuzzard-65F09CD2 |
| 1 | LDOA_OUT | TestPoint:TestPoint_Pad_D1.0mm | TP202 |
| 1 | LOGO | LOGO | G*** |
| 1 | Micro_SD_Card_Det1 | Connector_LCSC_SDCard:TF-SMD_TF-PUSH | J203 |
| 1 | NSR0320MW2T1G | Diode_SMD:D_SOD-323 | D405 |
| 1 | RXD | TestPoint:TestPoint_Pad_D1.0mm | TP215 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.0mm | TP214 |
| 1 | SCT2650STER | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm | U301 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.0mm | TP213 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U405 |
| 1 | T113-S3 | Package_QFP:LQFP-128_14x14mm_P0.4mm | U201 |
| 1 | TC2030-IDC | Tag-Connect:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J202 |
The 233 most common of 242 parts.
Similar boards
- 4 layers135.1 × 56.9 mm

- 4 layers204 × 184 mm

- 4 layers88 × 23.4 mm

- 6 layers85.2 × 56.1 mm

- 8 layers28 × 125 mm

Compact tablet
CopperPilot/tablet
An 8.4-inch tablet around a chip-down RK3566 + LPDDR4X: 8-layer 0.8 mm mainboard, USB-C daughter board, 1600x2560 dual-DSI display, CNC aluminium shell. Designed end to end by CopperPilot, open for review.
431 partsCERN-OHL-S-2.0 - 2 layers86.6 × 77.2 mm

Restore backup 2026-10-15T00-06-46-763
JulCesarCorrea/Basic-EPS
PCB design para a 4 fase da obsat
139 parts - 4 layers125.5 × 100 mm

- 2 layers

Questions
How big is the Underglow3 PCB?
It measures 81.2 × 100.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Underglow3 use?
242 parts, built around the T113-S3, AP6212, SN65HVD230DR and MCP1416T-E/OT(LX). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Underglow3 KiCad files?
From the ConnorRigby/nerves_system_underglow3 repository on GitHub, at the commit this page was made from: the board is hardware/MainBoard/underglow3.kicad_pcb and its schematic hardware/MainBoard/Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Underglow3 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).