4 layers220 × 120 mm
Electricui arena
electricui/electricui-arena
Hardware for continuous integration testing of serial interfaces and microcontrollers
268 parts27MIT
2 layers122.9 × 99.3 mm
RaspPi RemoteClusterController
inuyasha10121/RPi4CustomRemoteKVM1A custom remote KVM setup based around a Raspberry Pi 4.
- Size
- 122.9 × 99.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 82
- Pads
- 235
- Tracks, vias
- 377, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 May 2023
- Updated
- 1 May 2023
Overview
RaspPi RemoteClusterController is an open-source printed circuit board by inuyasha10121, from the inuyasha10121/RPi4CustomRemoteKVM repository on GitHub, published under the MIT licence. It is a 2-layer board of 122.9 × 99.3 mm with 52 parts on 82 nets, routed with 377 tracks and 7 vias.
It is built around the MAX4999ETJ. Its parts include 12 ICs, 12 connectors, 10 resistors and 5 capacitors.
Main components
1README
README.mdRPi4CustomRemoteKVM
A custom remote KVM setup based around a Raspberry Pi 4.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | PC817 | Package_DIP:DIP-4_W7.62mm | U5, U6, U7, U8, U9, U10, U11, U12 |
| 8 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J4, J5, J6, J7, J8, J9, J10, J11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1, C2, C3 |
| 3 | Addr | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 3.3V_Jump | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | JU3, JU4 |
| 2 | 5V_Jump | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | JU5, JU6 |
| 2 | GPB3_Jump | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | JU1, JU2 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Horizontal | J12 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | LT1085-3.3 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LT1085-5.0 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MAX4999 | AdditionalParts:MAX4999 | U4 |
| 1 | MCP23017_SO | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U3 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J3 |
Similar boards
- 6 layers172 × 100 mm
- 2 layers41.4 × 47.5 mm
U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers136 × 130 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530 - 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers105.2 × 42.4 mm
- 2 layers45 × 45 mm
AirCube
StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.
52 parts379Apache-2.0
Questions
How big is the RaspPi RemoteClusterController PCB?
It measures 122.9 × 99.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RaspPi RemoteClusterController use?
52 parts, built around the MAX4999ETJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RaspPi RemoteClusterController KiCad files?
From the inuyasha10121/RPi4CustomRemoteKVM repository on GitHub, at the commit this page was made from: the board is RaspPi_RemoteClusterController/RaspPi_RemoteClusterController.kicad_pcb and its schematic RaspPi_RemoteClusterController/RaspPi_RemoteClusterController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RaspPi RemoteClusterController design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).