
Oresat live card
oresat/oresat-dxwifi-hardware
OreSat hardware for high speed data communications using 2.4 GHz WiFi.

Carrier Board for ESP32-S3-DevKitC-1 that includes a 4 channel DAC and 8 channel ADC external expansion, as well power routing / monitoring.
Test controller carrier esp32 is an open-source printed circuit board by INTenX, from the INTenX/test-controller-carrier-esp32 repository on GitHub. It is a 4-layer board of 52.1 × 81.9 mm with 132 parts on 114 nets, routed with 800 tracks and 227 vias.
It is built around the MP2315SGJ-Z, MAX6107EUR+T and RC0603JR-100RL, with the RMCF0603FG10K0, LTST-C193KGKT-5A and RMCF0603FT10R0 among its other parts. Its parts include 73 resistors, 23 capacitors, 9 ICs, 9 diodes and 7 connectors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0Ohm | Resistor_SMD:R_0603_1608Metric | R20, R21, R25, R33, R43, R44, R46, R48, R49, R50, R52, R54, R57, R59, R69, R78 +3 |
| 17 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R12, R22, R47, R51, R53, R55, R56, R58, R60, R61, R62, R63, R64 +1 |
| 15 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C7, C10, C12, C14, C15, C16, C17, C18, C19, C22, C23 |
| 5 | Green | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 4 | 10 | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R28 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric | R3, R5, R13, R15 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C11, C13 |
| 4 | 4.7uH | Inductor_SMD:L_Sunlord_SWPA4020S | L1, L2, L3, L4 |
| 4 | 40.2K | Resistor_SMD:R_0603_1608Metric | R34, R35, R42, R45 |
| 4 | 47uF | Capacitor_SMD:C_1210_3225Metric | C8, C9, C20, C21 |
| 4 | 9.1K | Resistor_SMD:R_0805_2012Metric | R4, R6, R14, R16 |
| 4 | MP2315SGJ-Z | Library:TSOT-23-8 | U1, U5, U7, U8 |
| 3 | 14.3K | Resistor_SMD:R_0603_1608Metric | R9, R11, R66 |
| 3 | 33K | Resistor_SMD:R_0603_1608Metric | R29, R30, R39 |
| 3 | SS14 | Diode_SMD:D_SMA | D11, D15, D16 |
| 2 | 0.1 Ohm | Resistor_SMD:R_2512_6332Metric | R36, R37 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R23, R24 |
| 2 | 30K | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 4.02K | Resistor_SMD:R_0603_1608Metric | R31, R32 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R26, R27 |
| 2 | INA219AxD | Library:SOT-23-8 | U9, U10 |
| 2 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2 |
| 2 | SW_SPDT_321 | Button_Switch_SMD:SW_SPDT_PCM12 | SW1, SW2 |
| 1 | 12.7K | Resistor_SMD:R_0603_1608Metric | R41 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 6K | Resistor_SMD:R_0603_1608Metric | R67 |
| 1 | 7.5K | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 90.9K | Resistor_SMD:R_0603_1608Metric | R68 |
| 1 | ADC128D818 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | Conn_01x14 | Library:PinHeader_1x14_P2.54mm_Vertical_Oval_Pads | J15 |
| 1 | ESP32-S3-DevKitC_1-22 | Library:ESP32-S3-DevKitC_1-22 | ESP-1 |
| 1 | ESP32-S3-DevKitC_23-44 | Library:ESP32-S3-DevKitC_23-44 | ESP-2 |
| 1 | Isolation Module Power In Tap | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Isolation Module Power Out | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | LM66200DRLR | Package_TO_SOT_SMD:SOT-583-8 | U3 |
| 1 | MAX6107 | Package_TO_SOT_SMD:SOT-23 | U6 |
| 1 | Power In | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | DC1 |
| 1 | Power Out 1 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J2 |
| 1 | Power Out 2 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J3 |
| 1 | SM6T30A | Diode_SMD:D_SMB | D10 |
| 1 | VDUT1 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J4 |
| 1 | VDUT2 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J5 |
It measures 52.1 × 81.9 mm and has 4 copper layers, 1.6 mm thick.
132 parts, built around the MP2315SGJ-Z, MAX6107EUR+T, RC0603JR-100RL and RMCF0603FG10K0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the INTenX/test-controller-carrier-esp32 repository on GitHub, at the commit this page was made from: the board is test-controller-carrier-esp32.kicad_pcb and its schematic analog-section.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask INTenX before reusing the design.

oresat/oresat-dxwifi-hardware
OreSat hardware for high speed data communications using 2.4 GHz WiFi.




adam-kabbara/RSX-CANSAT-2026
This is a repository design to manage the files made by the Aerial team under the Robotics for Space eXploration design team at the University of Toronto

ChrisHayward-dev/SapphireKicad
See the LastProduction branch for the most current revision

oresat/oresat-gps-hardware
Hardware for OreSat's SDR GPS receive and other SDR GPS projects
