

Shish lan
Affordable Switch with AVB features
- Size
- 100 × 100 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 307
- Nets
- 266
- Pads
- 974
- Tracks, vias
- 2,031, 441
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Dec 2025
- Updated
- 29 Sep 2026
Overview
Shish lan is an open-source printed circuit board by kebag-logic, from the kebag-logic/shish-lan repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 6-layer board of 100 × 100 mm with 307 parts on 266 nets, routed with 2,031 tracks and 441 vias.
It is built around the STM32H742VGT6, LAN96455F-I/8MW and CRCW060310K0JNECC, with the CRGCQ0603J1K0, CC0603JRNPO8BN100 and AC0603JR-071K5L among its other parts. Its parts include 121 resistors, 108 capacitors, 17 connectors, 6 diodes and 5 ICs. It belongs with the STM32 boards of this library.
Main components
12STM32H742VGT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 12bit 16bit 1MB 32 Bit 480MHz 688KB 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LAN96455F-I/8MW
-- HWDG ROHSMicrochip TechnologyUncategorisedCRCW060310K0JNECC
0603-55℃~+155℃ 100mW 10kΩ Thick Film Resistor ±200ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountCRGCQ0603J1K0
0603-55℃~+155℃ 100mW 1kΩ Thick Film Resistor ±100ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountCC0603JRNPO8BN100
060310pF 25V NP0 ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTAC0603JR-071K5L
0603-55℃~+155℃ 1.5kΩ 100mW 75V Thick Film Resistor ±100ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountLTST-C194KRKT
0603-30℃~+85℃ 130° 20mA 2V 631nm 639nm 75mW 95.6mcd Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteCRF2512-J/-000ELF
2512-55℃~+170℃ 0Ω 2W ±3800ppm/℃ ±5% 2512 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountVXM7-9032-25M0000000
SMD3225-4P-40℃~+85℃ 25MHz 60Ω SMD crystal oscillator ±20ppm SMD3225-4P Crystals ROHSMicrochip TechnologyCrystalsEXLA1V0603-3R3-R
SMD,7.2x6.9mm20.8mΩ 3.3uH 8A 9A ±20% SMD,7.2x6.9mm Power Inductors ROHSEatonPower InductorsTLW-107-06-G-S
插件,P=2.54mm-55℃~+125℃ 1 2.54mm 5.2A 7P Black Gold Phosphor bronze Through Hole 插件,P=2.54mm Pin Headers ROHSSamtecPin HeadersBHR-20-VUA
TH-20PTH-20P Wire To Board Connector ROHSADAM TECHWire To Board Connector
Parts
307| Qty | Value | Footprint | References |
|---|---|---|---|
| 73 | 10u | KL_Footprints:C_0603 | C25, C26, C27, C28, C29, C30, C31, C32, C100, C101, C102, C104, C105, C107, C108, C109 +57 |
| 60 | 10K | KL_Footprints:R_0603 | R13, R14, R26, R27, R28, R29, R30, R31, R32, R100, R101, R102, R109, R122, R123, R124 +44 |
| 35 | ~ | KL_Footprints:TestPoint | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +19 |
| 23 | 0R | KL_Footprints:R_0603 | R17, R18, R21, R112, R119, R126, R127, R128, R129, R130, R131, R132, R133, R134, R135, R136 +7 |
| 22 | 100n | KL_Footprints:C_0603 | C1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +6 |
| 12 | 1K | KL_Footprints:R_0603 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 8 | 22R | KL_Footprints:R_0603 | R74, R110, R113, R114, R115, R116, R117, R118 |
| 6 | 10p | KL_Footprints:C_0603 | C22, C23, C86, C87, C92, C99 |
| 6 | 1K5 | KL_Footprints:R_0603 | R15, R20, R87, R89, R95, R137 |
| 6 | Header_02x01_2.54mm_0mm_Straight | KL_Footprints:02x01_2.54mm_Header | J2, J3, J8, J15, J16, J17 |
| 6 | LED_{color}_{U_F}_{I_F} | KL_Footprints:LED_0603 | D1, D2, D3, D4, D5, D6 |
| 5 | 0R | KL_Footprints:R_2512 | R23, R88, R108, R120, R121 |
| 5 | 33R | KL_Footprints:FB_0603 | FB1, FB2, FB3, FB4, FB5 |
| 4 | 2u2 | KL_Footprints:C_0603 | C81, C82, C83, C84 |
| 4 | MountingHole_M3 | KL_Footprints:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 10n | KL_Footprints:C_0603 | C80, C103, C106 |
| 3 | Header_03x01_2.54mm_0mm_Straight | KL_Footprints:03x01_2.54mm_Header | J4, J6, J7 |
| 3 | TPS564257DRLR | KL_Footprints:SOT-563 | U2, U3, U5 |
| 2 | 25M | KL_Footprints:VXM7 | X1, X2 |
| 2 | 3u3 | KL_Footprints:EXLA1V0603 | L1, L3 |
| 2 | Header_07x01_2.54mm_0mm_Straight | KL_Footprints:07x01_2.54mm_Header | J9, J10 |
| 2 | Header_10x02_2.54mm_2.54mm_Straight | KL_Footprints:10x02_2.54mm_Header | J5, J11 |
| 2 | SMA | KL_Footprints:SMA_Right_Angle | J13, J14 |
| 1 | 10R | KL_Footprints:R_0603 | R71 |
| 1 | 1u5 | KL_Footprints:SRP7050WA-1R5M | L2 |
| 1 | 20K | KL_Footprints:R_0603 | R125 |
| 1 | 31K6 | KL_Footprints:R_0603 | R19 |
| 1 | 45K3 | KL_Footprints:R_0603 | R80 |
| 1 | 47K | KL_Footprints:R_0603 | R94 |
| 1 | 6K04 | KL_Footprints:R_0603 | R70 |
| 1 | 9K1 | KL_Footprints:R_0603 | R82 |
| 1 | LAN96455F-I/8MW | KL_Footprints:TQFP-128_14x14mm_P0.4mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RJ45_0826-1X4T-43-F | KL_Footprints:BEL_0826-1X4T-43-F | J1 |
| 1 | STM32H742VGT6 | KL_Footprints:LQFP-100_14x14mm_P0.5mm | U4 |
| 1 | ~ | KL_Footprints:DC-Jack_Wuerth_694108301002 | J12 |
Similar boards
- 6 layers55 × 40 mm

- 4 layers52.1 × 81.9 mm

Test controller carrier esp32
INTenX/test-controller-carrier-esp32
Carrier Board for ESP32-S3-DevKitC-1 that includes a 4 channel DAC and 8 channel ADC external expansion, as well power routing / monitoring.
132 parts - 4 layers180 × 110 mm

PETER
dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.
419 parts4LGPL-2.1 - 4 layers

TPS56425X Regulator Layout
benvonhandorf/kicad-library
Schematic symbols and footprints for kicad, useful across more than one project
87 parts1MIT - 4 layers70 × 30 mm

Usb replug
clankagent/usb-replug
USB 2.0 timed disconnect adapter with CMOS 555; revision B unbuilt prototype for design review
40 parts - 4 layers20 × 100 mm

- 4 layers100 × 75 mm

OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT - 4 layers80 × 80 mm

Telemetry
chithigun23/ANUFS-Telemetry
To use custom hardware to measure parameters and dynamics of an ICE Formula SAE car.
159 parts
Questions
How big is the Shish lan PCB?
It measures 100 × 100 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Shish lan use?
307 parts, built around the STM32H742VGT6, LAN96455F-I/8MW, CRCW060310K0JNECC and CRGCQ0603J1K0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shish lan KiCad files?
From the kebag-logic/shish-lan repository on GitHub, at the commit this page was made from: the board is shish-lan.kicad_pcb and its schematic RJ45_Connector_Port0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shish lan design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).