4 layers100 × 100 mm
4 layers100 × 100 mm
PCBA ZONA
intechstudio/grid-hardware59- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 84
- Pads
- 330
- Tracks, vias
- 1,109, 176
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Feb 2019
- Updated
- 7 Nov 2026
Overview
PCBA ZONA is an open-source printed circuit board by intechstudio, from the intechstudio/grid-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 100 mm with 78 parts on 84 nets, routed with 1,109 tracks and 176 vias.
It is built around the RP2350A, GD25B64ESIGR and HX3406, with the BL1551B, ESDU5V0K4 and 74HC165D among its other parts. Its parts include 26 capacitors, 20 resistors, 11 ICs, 11 connectors and 3 switches. It belongs with the RP2350 boards of this library.
Main components
12
RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)GD25B64ESIGR
SOIC-8-208mil-40℃~+85℃ 133MHz 2.7V~3.6V 64Mbit SPI SOIC-8-208mil NOR FLASH ROHSGigaDevice Semicon BeijingNOR FLASH
HX3406
SOT-23-5-40℃~+85℃ 1 1.5MHz 1.8V~5.5V 40uA 800mA Adjustable Buck Buck Built-in SOT-23-5 DC-DC Converters ROHSHXDC-DC Converters
BL1551B
SC-70-6-40℃~+125℃ 1 1.8V~5.5V 15.5pF 2.7Ω@5.0V 20ns 2:1 30ns 350MHz SC-70-6 Analog Switches, Multiplexers ROHSBLAnalog Switches, MultiplexersESDU5V0K4
SOT-363-55℃~+150℃ 0.8pF 125W@8/20us 1uA 25V 5A@8/20us 5V 8.8V ESD Four channels IEC 61000-4-2 Unidirectional SOT-363 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers
74LVC1G08Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 2 2.4V、3.8V 32mA 32mA 4ns@5V,50pF 550mV、800mV 700mV、800mV 74LVC Series AND Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic GatesTD-1106SN-4.3H-250
SMD,6x3.3mm2.5N 3.3mm 4.3mm 6mm Gull Wing Rectangular Button SPST Surface Mount,Vertical White Without Bracket SMD,6x3.3mm Tactile Switches ROHSDEALONTactile Switches
GXTC252010-3R3-MT
10082.5A 2.8A 3.3uH 86mΩ Molded Inductor ±20% 1008 Molding Power Inductors ROHSFAUKUPower Inductors
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
1TS003A-2500-3500A-CT
SMD,4x2mm-40℃~+90℃ 1.82mm 12V 15,000 Cycles 2.5N 3.5mm 4.6mm 50mA Black J-Lead No Rectangular Button SPST Surface Mount, Right Angle With Bracket SMD,4x2mm Tactile Switches ROHSHYPTactile Switches
FPC-1.0FX-12PWBH20
SMD,P=1mm-25℃~+85℃ 0.3mm 12P 1mm 2mm 500mA 50V Bottom Contact Hinged Lid Phosphor bronze Surface Mount, Right Angle Tin SMD,P=1mm FFC, FPC (Flat Flexible) Connector Assemblies ROHSXUNPUFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdOpen-Source Hardware
https://certification.oshwa.org/hu000001.html
Licence: GPL3
Mechanical components
| Component | Part number | Type | Preview | Links |
|---|---|---|---|---|
| Lower housing | PLASTIC-CANVAS | Fabricated |  | [Model tree] [Download] |
| Mapmode button | PLASTIC-MAPMODE | Fabricated |  | [Download] |
| Magnet cover | PLASTIC-MAGNET-COVER | Fabricated |  | [Download] |
| Rubber foot | RUBBER-FOOT | Fabricated |  | [Download] |
| Zona arch | PLASTIC-ZONA-ARCH | Fabricated |  | [Download] |
| Rubber spacer | RUBBER-SPACER | Fabricated |  | [Download] |
| D3x14mm N52 neodymium | MAGNET-D3x14 | Fabricated |  | [Download] |
| 3x3x3mm N52 neodymium | MAGNET-SQ3 | Fabricated |  | [Download] |
| Crown | SPACER | Fabricated |  | [Download] |
| Metric corner screw | SCREW-M1.6x16 | Purchased |  | [Download] |
| Metric PCB screw | SCREW-M1.6x8 | Purchased |  | [Download] |
| Metric PCB screw | SCREW-M1.6x5-C | Purchased |  | [Download] |
| Brass threaded insert 3mm | INSERT-M1.6x2.5x3 | Purchased |  | [Download] |
| Brass threaded insert 4mm | INSERT-M1.6x2.5x4 | Purchased |  | [Download] |
| Lightpipe | PLASTIC-LIGHTPIPE | Purchased |  | [Download] |
| Encoder Knob Injection | PLASTIC-KNOB-ENC | Fabricated |  | [Download] |
| Potmeter Knob Injection | PLASTIC-KNOB-POT | Fabricated |  | [Download] |
| Encoder | THT-ENC | Purchased |  | [Download] |
| Potmeter | THT-POT | Purchased |  | [Download] |
| Fader | THT-FADER | Purchased |  | [Download] |
| Long Fader | THT-LONGFADER | Purchased |  | [Download] |
| Fader Cap | PLASTIC-CAP-FADER | Purchased |  | [Download] |
| Fader Insert | INSERT-FADER | Fabricated |  | [Download] |
| Button | THT-BUTTON | Purchased |  | [Download] |
| Button Cap | PLASTIC-CAP-BUTTON | Purchased |  | [Download] |
| Hall Switch | THT-HALL-SWITCH | Purchased |  | [Download] |
| Low Profile Keycap | PLASTIC-LOW-PROFILE-KEYCAP | Purchased |  | [Download] |
| Battery Connector | SMT-CONN-BATTERY | Purchased |  | [Download] |
| Pogo Connector | SMT-CONN-POGO | Purchased |  | [Download] |
TEK2 specific components
| Component | Part number | Type | Preview | Links |
|---|---|---|---|---|
| Knob TEK2 | KNOB-TEK2 | Fabricated |  | [Download] |
| Knob interface TEK2 | PLASTIC-TEK2-KNOB-INTERFACE | Fabricated |  | [Download] |
| Endless potentiometer | THT-ENDLESSPOT | Purchased |  | [Download] |
VSN1 specific components
| Component | Part number | Type | Preview | Links |
|---|---|---|---|---|
| VSN1 Display | SMT-VSN1-DISPLAY | Purchased |  | [Download] |
| VSN1 Display interface | PLASTIC-VSN1-DISPLAY-INTERFACE | Fabricated |  | [Download] |
| VSN1 Button | PLASTIC-VSN1-BUTTON | Fabricated |  | [Download] |
PCB Frontpanel
| Component | Part number | Preview | Links |
|---|---|---|---|
| XX16 Frontpanel | FP-XX16 |  | [STEP] [PCB3D] [Gerber] |
| BU16 Frontpanel | FP-BU16 |  | [STEP] [PCB3D] [Gerber] |
| PBF4 Frontpanel | FP-PBF4 |  | [STEP] [PCB3D] [Gerber] |
| EF44 Frontpanel | FP-EF44 |  | [STEP] [PCB3D] [Gerber] |
| TEK2 Frontpanel | FP-TEK2 |  | [STEP] [PCB3D] [Gerber] |
| VSN1-L Frontpanel | FP-VSN1-L |  | [STEP] [PCB3D] [Gerber] |
| VSN1-R Frontpanel | FP-VSN1-R |  | [STEP] [PCB3D] [Gerber] |
| VSN2 Frontpanel | FP-VSN2 |  | [STEP] [PCB3D] [Gerber] |
| OCTV Frontpanel | FP-OCTV |  | [STEP] [PCB3D] [Gerber] |
| ZONA Frontpanel | FP-ZONA |  | [STEP] [PCB3D] [Gerber] |
| ZONA SPACER Frontpanel | FP-ZONA-SPACER |  | [STEP] [PCB3D] [Gerber] |
| ZONA Decor Frontpanel | FP-ZONA-DECOR |  | [STEP] [PCB3D] [Gerber] |
PCB Frontpanel Collaborations
| Component | Part number | Preview | Links |
|---|---|---|---|
| BU16 MIDIGrade Frontpanel | FP-BU16-MIDIGRADE |  | [STEP] [PCB3D] [Gerber] |
| BU16 MIDIGrade Frontpanel | FP-EN16-MIDIGRADE |  | [STEP] [PCB3D] [Gerber] |
| PBF4 Classic Frontpanel | FP-PBF4-CLASSIC |  | [STEP] [PCB3D] [Gerber] |
| TEK2 Classic Frontpanel | FP-TEK2-CLASSIC |  | [STEP] [PCB3D] [Gerber] |
| XX16 Test Frontpanel | FP-XX16-TEST |  | [STEP] [PCB3D] [Gerber] |
Electrical components
Packaging
| Component | Part number | Preview | Links |
|---|---|---|---|
| PO16 Sleeve | PACKAGING-SLEEVE-PO16 |  | [PDF] |
| BU16 Sleeve | PACKAGING-SLEEVE-BU16 |  | [PDF] |
| PBF4 Sleeve | PACKAGING-SLEEVE-PBF4 |  | [PDF] |
| EN16 Sleeve | PACKAGING-SLEEVE-EN16 |  | [PDF] |
| EF44 Sleeve | PACKAGING-SLEEVE-EF44 |  | [PDF] |
| TEK2 Sleeve | PACKAGING-SLEEVE-TEK2 |  | [PDF] |
| VSN1-L Sleeve | PACKAGING-SLEEVE-VSN1-L |  | [PDF] |
| VSN1-R Sleeve | PACKAGING-SLEEVE-VSN1-R |  | [PDF] |
Desktop Tools Used
- FreeCAD
- KiCAD
Command-Line Tools Used
- PytonOCC
- OpenSCAD
- KiBOT
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | suku_basics:CAP_0402 | C202, C203, C204, C205, C206, C207, C208, C209, C210, C211, C212, C213, C215, C221, C501 |
| 8 | Conn_01x04 | suku_basics:J_INTERFACE_SPRINGPATTERN | J401, J402, J403, J404, J405, J406, J407, J408 |
| 6 | 100k | suku_basics:RES_0402 | R210, R305, R601, R602, R603, R604 |
| 4 | BL1551B | suku_basics:SOT-363_SC-70-6 | U301, U304, U306, U307 |
| 3 | 1k | suku_basics:RES_0402 | R202, R205, R209 |
| 3 | 22u | suku_basics:CAP_0603 | C302, C303, C304 |
| 3 | 27R | suku_basics:RES_0402 | R203, R207, R208 |
| 3 | 4u7 | suku_basics:CAP_0402 | C201, C214, C216 |
| 3 | 5k1 | suku_basics:RES_0402 | R206, R301, R302 |
| 2 | 0R | suku_basics:RES_0402 | R201, R605 |
| 2 | 10p | suku_basics:CAP_0402 | C218, C219 |
| 2 | 1u | suku_basics:CAP_0402 | C217, C220 |
| 2 | C2905169 | suku_basics:SW_SPST_CK_RS282G05A3 | SW202, SW203 |
| 2 | ESDU5V0K4 | suku_basics:SOT-363_SC-70-6 | U302, U305 |
| 2 | GXTC252010-3R3-MT | Inductor_SMD:L_1008_2520Metric | L201, L301 |
| 1 | 10k | suku_basics:RES_0402 | R204 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y201 |
| 1 | 1M | suku_basics:RES_0402 | R303 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D201 |
| 1 | 450k | suku_basics:RES_0402 | R304 |
| 1 | 4n7 | suku_basics:CAP_0402 | C301 |
| 1 | 74HC165 | suku_basics:SOIC-16_74HC165 | U501 |
| 1 | 74LVC1G08 | suku_basics:SOT-23-5-AND-TSSOP5 | U303 |
| 1 | C255807 | suku_basics:SW_HYP_MAPMODE | SW201 |
| 1 | Conn_01x02 | suku_basics:OscilloscopeGround | J201 |
| 1 | Conn_01x08 | suku_basics:grid_outline | M401 |
| 1 | FPC-1.0FX-12PWBH20 | Connector_FFC-FPC:Molex_200528-0120_1x12-1MP_P1.00mm_Horizontal | J601 |
| 1 | GD25B64ESIGR | suku_basics:SOIC-8W_FLASH | U202 |
| 1 | OSHWA | suku_basics:OSHWA | LOGO201 |
| 1 | RP2350A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U201 |
| 1 | RY3409 | suku_basics:SOT-23-5 | U308 |
| 1 | SPICS1 | TestPoint:TestPoint_Pad_D1.0mm | TP201 |
| 1 | TYPE-C-32-M-12 | suku_basics:USB_C_Korean_Hroparts_TYPE-C-31-M-12 | J301 |
Questions
How big is the PCBA ZONA PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PCBA ZONA use?
78 parts, built around the RP2350A, GD25B64ESIGR, HX3406 and BL1551B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCBA ZONA KiCad files?
From the intechstudio/grid-hardware repository on GitHub, at the commit this page was made from: the board is Electrical/Design/PCBA-ZONA/PCBA-ZONA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCBA ZONA design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from intechstudio/grid-hardware
12- 4 layers105.6 × 105.6 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 2 layers97 × 97 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 2 layers95 × 95 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
Similar boards
- 4 layers32.7 × 99.7 mm
Grid devkit
RustyCircuit/grid-devkit
KiCad PCB designed to interoperate with the Intech Studio Grid ecosystem. This devkit is a fork of Intech's VSNX hardware design, adapted to fill a gap between fully-developed hardware and breadboard/DIY controller…
167 parts1GPL-3.0 - 4 layers56 × 60 mm
PCBA KNOT
intechstudio/knot
Knot is the bridge between old-school MIDI gear like synthesizers, groove boxes, guitar pedals and neat USB MIDI devices.
111 parts58GPL-3.0 - 4 layers56 × 60 mm
- 2 layers40 × 65 mm
P-1000099 Cicada Lora
EnAccess/Cicada-LoRaWAN-HW
IoT Communications Module for Energy Access. A quick way to get production ready, bi-directional communications for your IoT embedded device.
55 parts - 2 layers40 × 65 mm
P-1000072 Cicada Wi Fi
EnAccess/Cicada-WiFi-HW
IoT Communications Module for Energy Access. A quick way to get production ready, bi-directional communications for your IoT embedded device.
68 partsMIT - 2 layers66 × 62 mm
Ch570aaonlyswadge
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
97 parts114 - 4 layers53.1 × 98 mm
- 2 layers100 × 54 mm
Ms2-card
ST-Oldie/Lokkarten-Emulator
Emulator für eine Märklin MS2 Lokkarte, Firmware und Kopie der Hardware von GBert
63 parts1GPL-3.0