

PCB V1.3
12-DOF Quadruped Robot
- Size
- 42.7 × 37.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 100
- Pads
- 425
- Tracks, vias
- 993, 478
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 May 2019
- Updated
- 23 Mar 2022
Overview
PCB V1.3 is an open-source printed circuit board by implementedrobotics, from the implementedrobotics/Nomad repository on GitHub, published under the MIT licence. It is a 4-layer board of 42.7 × 37.2 mm with 66 parts on 100 nets, routed with 993 tracks and 478 vias.
It is built around the STM32F446RET6, CSD88599Q5DC and AS5047P-AT, with the DRV8323RHRGZ and MCP2542FD among its other parts. Its parts include 34 capacitors, 14 resistors, 3 ICs, 3 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
5STM32F446RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 32 Bit 50 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CSD88599Q5DC
VSON-22(5x6)12W 16pF 2.1mΩ@10V 2V 4.84nF 56nC@10V 60V 870pF Half-Bridge VSON-22(5x6) MOSFETs ROHSTexas InstrumentsDC-DC Power ModulesAS5047P-AT
TSSOP1414-Bit On-Axis Magnetic Rotary Position Sensor with 12-Bit Decimal and Binary Incremental Pulse CountInfineon TechnologiesUncategorisedDRV8323RHRGZ
VQFN-48-EP(7x7)-40℃~+125℃ 12uA 1A 2A 6V~60V Half-Bridge、Three Phase MOSFET Under Voltage Protection、Over Current Protection、Short Circuit Protection、Overtemperature protection (OTP) VQFN-48-EP(7x7) Gate Drivers ROHSTexas InstrumentsBrushless DC (BLDC) Motor DriverMCP2542FD
UncategorisedMicrochip Technology
README
README.mdNOMAD
NOMAD is a 12-DOF quadruped walking robot using Linear and Nonlinear Optimization Control techniques.
- Linear and Nonlinear Model Predictive Control
- Simultaneous Localization and Mapping
- Remote Control Teleoperation
Software Installation
First thing to do is setup your software/development environment to build the source code: Software Setup.
Hardware Installation
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10uF, 50v | Capacitor_SMD:C_1206_3216Metric | C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37 |
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5, C6, C8, C9, C15, C22 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R6, R7, R9 |
| 3 | .001 | Resistor_SMD:R_1210_3225Metric | R12, R13, R14 |
| 3 | 200 | Resistor_SMD:R_0402_1005Metric | R2, R3, TERM1 |
| 3 | CSD88599Q5DC | CSD88599Q5DC:MOSFET_CSD88599Q5DC | U1, U3, U4 |
| 2 | .1uF, 50v | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C13 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R8, R10 |
| 2 | 22uf | Capacitor_SMD:C_0603_1608Metric | C17, C19 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | LED1, LED2 |
| 1 | 150k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1uF, 50v | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 1uf | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 22uH | PCB_V1.2:SDR0302 | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 47nF, 50v | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 54.9k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 600r | Inductor_SMD:L_0603_1608Metric | CHOKE1 |
| 1 | AS5047P | PCB_V1.2:TSSOP14 | AS5047P1 |
| 1 | CSTCE | HKCV4:CSTCE | XTAL1 |
| 1 | Conn_01x03 | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J1 |
| 1 | Conn_01x08 | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | PROG1 |
| 1 | DIODE | Diode_SMD:D_SOD-123 | D1 |
| 1 | DRV8323RH | Package_DFN_QFN:Texas_S-PVQFN-N48_EP5.15x5.15mm_Islands | DRV1 |
| 1 | LDFM | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | LDFM1 |
| 1 | MCP2542 | Package_DFN_QFN:TDFN-8-1EP_3x2mm_P0.5mm_EP1.80x1.65mm | CAN1 |
| 1 | STM32F446RET6 | Package_QFP:TQFP-64_10x10mm_P0.5mm | STM1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J2 |
| 1 | jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
More from implementedrobotics/Nomad
2- 4 layers38.9 × 37.5 mm

- 4 layers38.9 × 37.5 mm

Similar boards
- 4 layers42 × 50.2 mm

- 8 layers50 × 50 mm

Omodri laas
open-dynamic-robot-initiative/open-motor-driver-initiative
Open-source drive for brushless motors, following the open dynamic robot initiative
265 parts122BSD-3-Clause - 4 layers60 × 60 mm

Pino rs
timblakely/pino-rs
Bare-metal BLDC controller for Pino the robot, written in Rust.
20 parts19MIT - 6 layers60 × 48 mm

Quadesc
embedconsult/quadesc
BeagleConnect QuadESC is a four-motor power board with BeagleConnect Torque installed as its system-on-module. This repository contains the editable mainboard and module designs, schematics, firmware sources and…
247 parts9 - 4 layers47 × 47 mm

Motor Gen2
RoMeLaUCLA/romela-motor-driver
Motor driver PCB and firmware designed for RoMeLa actuators.
151 parts6MIT - 4 layers59 × 55.3 mm

- 4 layers133.4 × 63.7 mm

ESC
Nabentiest/ESC
SW2A/SW2Bは同一DPSTスイッチの機械連動接点とする。 実装はC&K JS202011JCQNのDPDTスライドスイッチをDPSTとして使用し、 各極の共通端子と片側接点だけを接続する。未使用接点は無接続とする。 ESDCAN05-2BWYはSOT-323で、pin 1=CANH、pin 2=CANVSS、 pin 3=CANLとして使用する。
108 parts - 4 layers134 × 140 mm

Questions
How big is the PCB V1.3 PCB?
It measures 42.7 × 37.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PCB V1.3 use?
66 parts, built around the STM32F446RET6, CSD88599Q5DC, AS5047P-AT and DRV8323RHRGZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB V1.3 KiCad files?
From the implementedrobotics/Nomad repository on GitHub, at the commit this page was made from: the board is Hardware/Actuator/NomadBLDC/PCBV1.3_CSD/KICAD/PCB_V1.3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB V1.3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).