4 layers134 × 140 mm
MCP2542FD
Microchip Technology
microchip/MCP2542FD
- Category
- Uncategorised
- Pins
- 8
Overview
The MCP2542FD is an uncategorised made by Microchip Technology with 8 pins.
PCBKit's library has its KiCad symbol (Celestial_Interface_CAN:MICROCHIP MCP2542FD, from Altium's library), ready for a KiCad board. 20 open-source boards in 13 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | TXD | Passive |
| 2 | VSS | Passive |
| 3 | VDD | Passive |
| 4 | RXD | Passive |
| 5 | VIO | Passive |
| 6 | CANL | Passive |
| 7 | CANH | Passive |
| 8 | STBY | Passive |
Open-source boards using it
All 20- 4 layers38.9 × 37.5 mm
- 4 layers55.5 × 48 mm
- 4 layers115 × 140 mm
- 2 layers50 × 55 mm
- 4 layers42 × 50.2 mm
- 4 layers20 × 38 mm
Duet3 SZP
Duet3D/Duet3-ScanningZProbe
The Duet 3 Scanning Z probe is a CAN-FD connected inductive sensing board, with compatible inductive PCB coils. It allows for a point mesh of the bed to be built up quickly as no movement in Z is required to read the…
81 parts2 - 2 layers100 × 66 mm
Ecocar on boarding Rev4
elamey413/EcoCar_Onboarding
Here is my onboarding project for EcoCar. It is a STM32F103C8T6 based PCB that is able to measure several important data points for drone flying.
52 parts1
Questions
Is there a KiCad symbol and footprint for the MCP2542FD?
Yes. The symbol is Celestial_Interface_CAN:MICROCHIP MCP2542FD, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the MCP2542FD?
20 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.