Skip to the content
4 layers38.9 × 37.5 mmPCB V1.2, the printed circuit board in 3D

12-DOF Quadruped Robot

Size
38.9 × 37.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
66
Nets
58
Pads
380
Tracks, vias
807, 458
Pours
28
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 May 2019
Updated
23 Mar 2022

Overview

PCB V1.2 is an open-source printed circuit board by implementedrobotics, from the implementedrobotics/Nomad repository on GitHub, published under the MIT licence. It is a 4-layer board of 38.9 × 37.5 mm with 66 parts on 58 nets, routed with 807 tracks and 458 vias.

It is built around the STM32F446RET6, AS5047P-AT and DRV8323RHRGZ, with the MCP2542FD among its other parts. Its parts include 31 capacitors, 10 resistors, 6 transistors, 3 diodes and 1 inductor. It belongs with the STM32 boards of this library.

Main components

4

README

README.md

NOMAD

NOMAD is a 12-DOF quadruped walking robot using Linear and Nonlinear Optimization Control techniques.

  • Linear and Nonlinear Model Predictive Control
  • Simultaneous Localization and Mapping
  • Remote Control Teleoperation

Software Installation

First thing to do is setup your software/development environment to build the source code: Software Setup.

Hardware Installation

Parts

66
QtyValueFootprintReferences
910uF, 50vHKCV4:C1206KC1, C2, C3, C4, C5, C6, C7, C8, C9
7100nFHKCV4:C0402KC18, C20, C21, C22, YCAP1, YCAP2, YCAP3
6TPHHKCV4:TRANS_TPH5900CNH,L1QQ1, Q2, Q3, Q4, Q5, Q6
410kHKCV4:R0402R1, R2, R5, R6
3.1uFHKCV4:C0402KC26, C27, C28
2.001HKCV4:R1210R7, R8
20.1uF, 50vHKCV4:C0603KC10, C13
218_AWG_PADTestPoint:TestPoint_Pad_3.0x3.5mmU$1, U$2
218_AWG_PADTestPoint:TestPoint_Pad_3.0x3.0mmU$4, U$5
21uFHKCV4:C0402KC15, C19
2200HKCV4:R0402R9, R10
222ufHKCV4:C0603KC24, C25
2?M03B-SRSS-TBSConnector_JST:JST_SUR_BM03B-SURS-TF_1x03-1MP_P0.80mm_VerticalSER1, SER2
2GHKCV4:LED-0603LED1, LED2
1100nFHKCV4:C0402C11
1150kHKCV4:R0402R3
11uF, 50vHKCV4:C0603KC16
11ufHKCV4:C0402C23
122uFHKCV4:C0603KC12
122uHHKCV4:SDR0302L1
14.7uFHKCV4:C0402KC17
147nF, 50vHKCV4:C0402KC14
154.9kHKCV4:R0402R4
1600rHKCV4:0603CHOKE1
1AS5047PHKCV4:TSSOP14AS5047P1
1CSTCEHKCV4:CSTCEXTAL1
1Conn_01x08Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_HorizontalPROG1
1DIODE-SOD123HKCV4:SOD123D1
1DRV8323RHPackage_DFN_QFN:Texas_S-PVQFN-N48_EP5.15x5.15mm_IslandsDRV1
1LDFMHKCV4:DFN6-3X3LDFM1
1MCP2542Package_DFN_QFN:TDFN-8-1EP_3x2mm_P0.5mm_EP1.80x1.65mmCAN1
1STM32F446RET6HKCV4:TQFP64STM1
1test_pointTestPoint:TestPoint_Pad_3.0x3.0mmU$3

More from implementedrobotics/Nomad

2
  • 4 layers38.9 × 37.5 mmPCB V1.3, the printed circuit board in 3D

    PCB V1.3

    implementedrobotics/Nomad

    12-DOF Quadruped Robot

    74 parts34MIT
  • 4 layers42.7 × 37.2 mmPCB V1.3, the printed circuit board in 3D

    PCB V1.3

    implementedrobotics/Nomad

    12-DOF Quadruped Robot

    66 parts34MIT

Similar boards

  • 4 layers42 × 50.2 mmDaedalus, the printed circuit board in 3D

    Daedalus

    0xJeremy/Daedalus

    Hardware and Firmware for the Daedalus Motor Controller

    99 parts2
  • 4 layers134 × 140 mmDuet3 MB 6HC, the printed circuit board in 3D

    Duet3 MB 6HC

    Duet3D/Duet3-Mainboard-6HC

    Hardware information for the Duet 3 Mainboard 6HC

    723 parts53
  • 4 layers55.5 × 48 mmDuet3 TB 1LC, the printed circuit board in 3D

    Duet3 TB 1LC

    Duet3D/Duet3-Toolboard-1LC

    Hardware information for the Duet 3 Toolboard 1LC

    190 parts15
  • 4 layers115 × 140 mmDuet3 MB 6XD, the printed circuit board in 3D

    Duet3 MB 6XD

    Duet3D/Duet3-Mainboard-6XD

    Hardware information for the Duet 3 Mainboard 6XD

    491 parts6
  • 2 layers50 × 55 mmDuet3 EXB 1XD, the printed circuit board in 3D

    Duet3 EXB 1XD

    Duet3D/Duet3-Expansion-1XD

    Hardware information for the Duet 3 Expansion 1XD

    110 parts4
  • 4 layers20 × 38 mmDuet3 SZP, the printed circuit board in 3D

    Duet3 SZP

    Duet3D/Duet3-ScanningZProbe

    The Duet 3 Scanning Z probe is a CAN-FD connected inductive sensing board, with compatible inductive PCB coils. It allows for a point mesh of the bed to be built up quickly as no movement in Z is required to read the…

    81 parts2
  • 2 layers100 × 66 mmEcocar on boarding Rev4, the printed circuit board in 3D

    Ecocar on boarding Rev4

    elamey413/EcoCar_Onboarding

    Here is my onboarding project for EcoCar. It is a STM32F103C8T6 based PCB that is able to measure several important data points for drone flying.

    52 parts1
  • 2 layers28.4 × 20.3 mmSimplified can module, the printed circuit board in 3D

    Simplified can module

    polymetric/spicanfd

    Add CAN-FD to a microcontroller through SPI

    18 parts1Apache-2.0

Questions

How big is the PCB V1.2 PCB?

It measures 38.9 × 37.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PCB V1.2 use?

66 parts, built around the STM32F446RET6, AS5047P-AT, DRV8323RHRGZ and MCP2542FD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB V1.2 KiCad files?

From the implementedrobotics/Nomad repository on GitHub, at the commit this page was made from: the board is Hardware/Actuator/NomadBLDC/PCB_V1.2/kicad/PCB_V1.2/PCB_V1.2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB V1.2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).