

Sabertoothv2
Illinios Robotics in Space PCB
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 26
- Pads
- 109
- Tracks, vias
- 171, 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Feb 2023
- Updated
- 7 Mar 2026
Overview
Sabertoothv2 is an open-source printed circuit board by IllinoisRoboticsInSpace, from the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub. It is a 2-layer board of 50 × 50 mm with 34 parts on 26 nets, routed with 171 tracks and 16 vias.
It is built around the LM2104D and 74LVC1GU04DRL. Its parts include 6 transistors, 4 connectors, 3 ICs, 2 capacitors and 2 resistors.
Main components
2Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1V | Diode_SMD:D_SOD-128 | ANTIPARALLEL1, ANTIPARALLEL2, ANTIPARALLEL3, ANTIPARALLEL4, DBOOT1, DBOOT2 |
| 6 | 2.2R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RBOOT1, RBOOT2, RGATE1, RGATE2, RGATE3, RGATE4 |
| 4 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | CBOOT1, CBOOT2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | CGVDD1, CGVDD2 |
| 2 | 220p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 50R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | LM2104 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2 |
| 2 | NMOS | mosfet:PPAK1212-8Custom | Q5, Q6 |
| 2 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J1, J2 |
| 1 | 74LVC1GU04DRL | Package_TO_SOT_SMD:SOT-553 | U3 |
| 1 | LOGO | Custom_Silkscreen_and_memes:IRIS_logo_smaller | G*** |
More from IllinoisRoboticsInSpace/IRIS_PCB
8- 2 layers127 × 127 mm

- 4 layers127 × 127 mm

Power Distribution Board Ver.2
IllinoisRoboticsInSpace/IRIS_PCB
Illinios Robotics in Space PCB
95 parts2 - 4 layers

- 4 layers70 × 100 mm

Power Distribution Board Ver.2
IllinoisRoboticsInSpace/IRIS_PCB
Illinios Robotics in Space PCB
79 parts2 - 4 layers

- 2 layers

- 2 layers215 × 85 mm

- 2 layers115 × 75 mm

Similar boards
- 2 layers10.8 × 21.8 mm

NullCIC
Redherring32/NullCIC
A little board to replace the CIC on the original NES or OpenTendo.
4 parts116 - 4 layers233.4 × 100 mm

- 2 layers88.9 × 71.8 mm

Adapter
doitaljosh/gea-interface-board
KiCAD board files for making an interface board that converts the RJ45 diagnostic port on most newer GE appliances to usable UART. Note: these are untested designs.
44 parts10 - 4 layers100 × 70 mm

- 2 layers114.2 × 36.8 mm

Airbox
Alacrity-Education/AirBoxV2
The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.
68 parts6GPL-3.0 - 2 layers100 × 50 mm

- 4 layers191 × 229 mm

- 2 layers72.4 × 48.3 mm

Questions
How big is the Sabertoothv2 PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sabertoothv2 use?
34 parts, built around the LM2104D and 74LVC1GU04DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sabertoothv2 KiCad files?
From the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub, at the commit this page was made from: the board is boards/Sabertoothv2/Sabertoothv2.kicad_pcb and its schematic boards/12V_Power_System/12V_Power_System.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sabertoothv2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask IllinoisRoboticsInSpace before reusing the design.