2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98
2 layers67 × 62.1 mm
AirFlow
ilkerya/AirFlow_Pcb- Size
- 67 × 62.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 82
- Pads
- 208
- Tracks, vias
- 500, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Jun 2021
- Updated
- 8 Jun 2021
Overview
AirFlow is an open-source printed circuit board by ilkerya, from the ilkerya/AirFlow_Pcb repository on GitHub. It is a 2-layer board of 67 × 62.1 mm with 69 parts on 82 nets, routed with 500 tracks and 26 vias.
It is built around the ARDUINO UNO R3, MCP6004-E/P and 1N4148WS. Its parts include 19 resistors, 5 diodes, 4 capacitors, 3 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdAirFlow_Pcb
AirFlow Sensor PCB files made with https://www.kicad.org/
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP0, JP1, JP2, JP3, JP3V3, JP4, JP5, JP5V1, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13 +4 |
| 6 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JPA0, JPA1, JPA2, JPA3, JPA4, JPA5 |
| 4 | 1N4148WS | Diode_SMD:D_SOD-323 | D1, D2, D3, D4 |
| 4 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R22, R23 |
| 4 | 82K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R19, R21 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4 |
| 2 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | Rntc1, Rntc2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R20 |
| 2 | 3K9 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R18 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R16 |
| 2 | 60R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R17 |
| 2 | 860R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R15 |
| 2 | Adafruit_ThermoModule | Custom_Ilker:Thermo_Int_Adafruit2 | U2, U3 |
| 2 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Jntc1, Jntc2 |
| 2 | IRLML2060 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_5x5.4 | C3 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Conn_01x06_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | Led1 |
| 1 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
Questions
How big is the AirFlow PCB?
It measures 67 × 62.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AirFlow use?
69 parts, built around the ARDUINO UNO R3, MCP6004-E/P and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AirFlow KiCad files?
From the ilkerya/AirFlow_Pcb repository on GitHub, at the commit this page was made from: the board is AirFlow.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AirFlow design in my own project?
Its repository states no licence, so its author keeps all rights: ask ilkerya before reusing the design.
Similar boards
- 2 layers39.4 × 107.9 mm
- 2 layers151.4 × 128.5 mm
- 4 layers202.5 × 110 mm
- 2 layers196 × 66 mm
Remote input
enemonsieur/TIMS_analyses
Analyses of TIMS stimulation + EEG for Characterization.
83 parts - 4 layers70.8 × 108 mm
- 4 layers60 × 94 mm
DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
80 parts559MIT - 2 layers75 × 100 mm
Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530