
StandardModuleV2
ilicmiljan/open-can-controller
Open-source CAN bus controller for BMW E9X instrument clusters (Firmware + PCB)

Open-source CAN bus controller for BMW E9X instrument clusters (Firmware + PCB)
B CAN Module is an open-source printed circuit board by ilicmiljan, from the ilicmiljan/open-can-controller repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 25.5 × 30 mm with 30 parts on 50 nets, routed with 156 tracks and 88 vias.
It is built around the ATMEGA328PB-AU, TJA1051T and MCP2515-I, with the SM24CANB-02HTG, TPS7B8250QDGNRQ1 and B260 among its other parts. Its parts include 12 capacitors, 5 ICs, 4 connectors, 3 resistors and 3 diodes. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
KiCad PCB design for the AVR-based CAN controller. Built around the ATmega328PB with an MCP2515 CAN transceiver.
| Reference | Part | Description |
|---|---|---|
| U1 | ATmega328PB-MU | Main MCU (QFN-32) |
| U2 | MCP2515 | SPI CAN controller |
| D1 | SM24CANB-02HTG | CAN bus TVS diode (ESD protection) |
| U3 | TPS7B8250QDGNRQ1 | 5V automotive LDO regulator |
| J1 | SM06B-SRSS-TB | 6-pin JST SH connector |
| File | Description |
|---|---|
B CAN Module.kicad_sch | Schematic |
B CAN Module.kicad_pcb | PCB layout |
B CAN Module.kicad_pro | KiCad project file |
Pre-generated fabrication files (Gerbers, BOM, component positions) are available on the Releases page.
To regenerate locally, requires KiCad 9 and KiKit:
kikit fab jlcpcb --assembly --schematic "B CAN Module.kicad_sch" "B CAN Module.kicad_pcb" output/| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C7, C8 |
| 4 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric | C9, C10, C11, C12 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 1 | 160mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ATmega328PB | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U1 |
| 1 | B260 | Diode_SMD:D_SMA | D2 |
| 1 | CANBUS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | CSTNE16M0V53Z000R0 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y2 |
| 1 | ICSP | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | MCP2515 | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
| 1 | SM24CANB-02HTG | SM24CANB:SOT23-3_SM24CANB-02HTG_LTF | U5 |
| 1 | SMAJ18CA | Diode_SMD:D_SMA | D1 |
| 1 | Serial RX | TestPoint:TestPoint_Pad_1.0x1.0mm | J2 |
| 1 | Serial TX | TestPoint:TestPoint_Pad_1.0x1.0mm | J3 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TPS7B8250QDGNRQ1 | TPS7B8250QDGNRQ1:DGN0008D_N | U4 |

ilicmiljan/open-can-controller
Open-source CAN bus controller for BMW E9X instrument clusters (Firmware + PCB)



makeitlabs/doorbot
Doorbot is an RFID access control platform, primarily intended for exterior doors in a makerspace environment. Based on Raspberry Pi 3b+, PoE hat, and a custom interface hat.


mefe00/NEMA17_Control_Card
A driver board designed for direct mounting to the rear of NEMA17 motors and supporting PID control algorithms. Please read the README.md for features and applications. Development and work on new versions are ongoing.

tristan-yk/Aroma
PCB design files and firmware for multi-channel diffuser driver board.

caipiblack/STM32-CAN-Bus-board
This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus

It measures 25.5 × 30 mm and has 4 copper layers, 1.6 mm thick.
30 parts, built around the ATMEGA328PB-AU, TJA1051T, MCP2515-I and SM24CANB-02HTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ilicmiljan/open-can-controller repository on GitHub, at the commit this page was made from: the board is hardware/avr/B CAN Module.kicad_pcb and its schematic hardware/avr/B CAN Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).