
FastLOGIC
Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

Coin acceptor is an open-source printed circuit board by ikok07, from the ikok07/coin_acceptor_pcb repository on GitHub. It is a 2-layer board of 80.1 × 70.8 mm with 28 parts on 34 nets, routed with 113 tracks and 3 vias.
It is built around the EL817. Its parts include 13 connectors, 8 capacitors, 4 resistors, 2 diodes and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J3, J6, J7, J8, J9, J10 |
| 5 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C3, C6, C7, C8 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5, J11, J12, J13 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | Conn_01x15_Socket | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1, J2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | 470pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 1 | D_Schottky | Diode_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D1 |
| 1 | EL817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J4 |

Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

fellettigiacomo/esp32-WLED-4ch-controller
Open source 4 Channel esp32-powered WLED controller with 4 relays and built in level shifter





AnaviTechnology/anavi-opto-isolator
Opto-isolator board for Arduino, ESP32, Raspberry Pi, etc. Supports 12V to 3.3V, 12V to 5V, 24V to 3.3V, 24V to 5V.
It measures 80.1 × 70.8 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the EL817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ikok07/coin_acceptor_pcb repository on GitHub, at the commit this page was made from: the board is coin_acceptor.kicad_pcb and its schematic coin_acceptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ikok07 before reusing the design.