Skip to the content
2 layers86.5 × 57.1 mmCONTROL PowerSupply, the printed circuit board in 3D

Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources

Size
86.5 × 57.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
37
Pads
114
Tracks, vias
0, 6
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
23 Aug 2026
Updated
23 Aug 2026

Overview

CONTROL PowerSupply is an open-source printed circuit board by IKGB105, from the IKGB105/PCBs-POWER-ELECTRONICS repository on GitHub. It is a 2-layer board of 86.5 × 57.1 mm with 27 parts on 37 nets.

It is built around the LM358P, 74LS04PC and CD4043BE, with the LM317T and BC547B among its other parts. Its parts include 11 resistors, 6 ICs, 4 connectors, 3 capacitors and 1 transistor. It belongs with the power boards of this library.

Main components

5

README

README.md

Power Electronics PCBs

Power electronics boards from coursework — physical PCB designs, not just simulation. Each folder is a separate board with its own schematic/layout, a 3D render, and (coming soon) real photos of the built board.

ProjectWhat it is
scr-controller/SCR/thyristor phase-control firing board
buck-converter-24-120v/Buck converter, 24 V input target
classd-amplifier-stm32/Class D amplifier, STM32-controlled switching
power-supply-protected/Voltage supply with short-circuit protection (power + control boards)

All of these were built as coursework together with DasReyxr and Kevin Lara — the original combined project history lives in DasReyxr/HW-Projects. This repo pulls out just the PCB projects, one per folder, with proper writeups and renders instead of a mixed dump of exam/simulation files.

Parts

27
QtyValueFootprintReferences
4Screw_Terminal_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ4, J6, J7, J9
3220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR9, R13, R15
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR8, R12
210kPCM_Potentiometer_THT_AKL:Potentiometer_Alps_RK163_Single_HorizontalRV2, RV3
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR1, R16
274LS08Package_DIP:DIP-14_W7.62mm_LongPadsU6, U7
10.15Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_VerticalR7
10.15Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR11
10.1uCapacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02C2
115kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR14
11uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC3
1220uCapacitor_THT:CP_Radial_D10.0mm_P3.50mmC1
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR2
174LS04Package_DIP:DIP-14_W7.62mm_LongPadsU5
1BC547BPCM_Package_TO_SOT_THT_AKL:TO-92_Inline_Wide_CBEQ1
1CD4043BEfootprints:N16U8
1LM317TPCM_Package_TO_SOT_THT_AKL:TO-220-3_VerticalU1
1LM358PLM358P:LM358PU4

Similar boards

  • 2 layers94.1 × 121.9 mmSCH PowerSupply, the printed circuit board in 3D

    SCH PowerSupply

    UAA-F14/PCBs-Design

    Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources

    47 parts1
  • 2 layers100 × 50 mmBSPD, the printed circuit board in 3D

    BSPD

    SDU-Vikings/BSPD

    Formula Student -- Brake System Plausibility Device

    110 parts31CC0-1.0
  • 2 layers158 × 118 mmIMD Carrier, the printed circuit board in 3D

    IMD Carrier

    ManchesterStingerMotorsports/IMD_Carrier

    Reset board for the imd that will sit below it in the TSAC

    68 parts
  • 2 layers153 × 89 mmHbridge, the printed circuit board in 3D

    Hbridge

    ttoomat/KiCad_MOSFET_Drv

    My schematics and PCBs for MOSFET + driver -> AC switches -> Half-bridges -> motor control.

    23 parts
  • 4 layers30 × 24.2 mmPDM Logic Test v2.0, the printed circuit board in 3D

    PDM Logic Test v2.0

    LHRIC/Monorepo-26-27

    Monorepo for the 26-27 Season

    23 parts4
  • 2 layers76.4 × 63.3 mmInfraRedGelUniversalDispenser, the printed circuit board in 3D

    InfraRedGelUniversalDispenser

    abdontroche/InfraRed_Gel_Universal_Dispenser

    This project pretends to be a open source device that could help people fighting against the COVID-19.

    20 parts5CC0-1.0
  • 4 layers56 × 51 mmPsu controller, the printed circuit board in 3D

    Psu controller

    igorzab-stud/wanptek_encoder

    Digital front-panel mod for Wanptek DC power supplies — replaces analog potentiometers with dual rotary encoders, MCP4725 DACs, and an OLED display.

    11 parts3MIT
  • 4 layers186.9 × 129.8 mmBLDC 4, the printed circuit board in 3D

    BLDC 4

    ansh1113/e-bike-conversion-kit

    A 4-layer PCB-based e-bike conversion kit featuring an STM32-based VESC ESC, power management circuits, wireless throttle, GSM, GPS, and more.

    179 parts1

Questions

How big is the CONTROL PowerSupply PCB?

It measures 86.5 × 57.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CONTROL PowerSupply use?

27 parts, built around the LM358P, 74LS04PC, CD4043BE and LM317T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CONTROL PowerSupply KiCad files?

From the IKGB105/PCBs-POWER-ELECTRONICS repository on GitHub, at the commit this page was made from: the board is power-supply-protected/control-stage/CONTROL_PowerSupply.kicad_pcb and its schematic buck-converter-24-120v/BuckConverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CONTROL PowerSupply design in my own project?

Its repository states no licence, so its author keeps all rights: ask IKGB105 before reusing the design.