
Mozc doublesided
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Jfet tester is an open-source printed circuit board by ikatkov, from the ikatkov/jfet-tester repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 82.3 × 27 mm with 26 parts on 6 nets, routed with 137 tracks and 1 via.
Its parts include 12 transistors, 3 resistors, 2 diodes, 1 connector and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 1 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | B1 | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | DMM+ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | TP1 |
| 1 | DMM- | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | TP2 |
| 1 | D_Schottky | Diode_SMD:D_MiniMELF | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | OK | LED_THT:LED_D5.0mm | D2 |
| 1 | Q_NJFET_DGS | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Q_NJFET_DGS | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q7 |
| 1 | Q_NJFET_DSG | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q8 |
| 1 | Q_NJFET_DSG | Package_TO_SOT_THT:TO-92_Inline_Wide | Q2 |
| 1 | Q_NJFET_GDS | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q9 |
| 1 | Q_NJFET_GDS | Package_TO_SOT_THT:TO-92_Inline_Wide | Q3 |
| 1 | Q_NJFET_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q10 |
| 1 | Q_NJFET_GSD | Package_TO_SOT_THT:TO-92_Inline_Wide | Q4 |
| 1 | Q_NJFET_SDG | Package_TO_SOT_THT:TO-92_Inline_Wide | Q5 |
| 1 | Q_NJFET_SDG | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q11 |
| 1 | Q_NJFET_SGD | Package_TO_SOT_THT:TO-92_Inline_Wide | Q6 |
| 1 | Q_NJFET_SGD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q12 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.



nspired-Hackers/nternet-Link
Wi-Fi, AI chat, and camera module for TI-Nspire calculators. Custom ESP32 PCBs + firmware. (Yes, 'nternet' is intentional, Nspire community naming.)


It measures 82.3 × 27 mm and has 4 copper layers, 1.6 mm thick.
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ikatkov/jfet-tester repository on GitHub, at the commit this page was made from: the board is kicad/main.kicad_pcb and its schematic kicad/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).