Skip to the content
2 layers30 × 99 mmQuantizer, the printed circuit board in 3D

eurorack modular synthesizers projects using Arduino.

Size
30 × 99 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
41
Pads
117
Tracks, vias
212, 1
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Mar 2021
Updated
16 Feb 2024

Overview

Quantizer is an open-source printed circuit board by ijnekenamay, from the ijnekenamay/HAGIWOs_Module repository on GitHub. It is a 2-layer board of 30 × 99 mm with 37 parts on 41 nets, routed with 212 tracks and 1 via.

It is built around the BAT43. Its parts include 12 resistors, 9 diodes, 5 connectors, 4 capacitors and 2 switches. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

HAGIWOs_Module

The purpose of this is to PCB the project that HAGIWO is working on. The Kicad project files, including the circuit and panel designs, are now available. I'm just starting to learn more about circuit design, so if there are any issues with the design or the circuit itself, please let me know immediately!

!! Note !!

  • Most projects are designed to fit 6HP, but may be larger to accommodate PCB widths.
  • Please note that there is no guarantee for the PCB production itself, as there are few actual PCBs that have been produced and verified.
  • Please note that there is no guarantee for the PCB production itself.
  • I won't go into the code here, you can find it on the HAGIWO website.

V2044 VCF

This is a PCB version of the V2044 VCF designed by HAGIWO. This VCF uses the same 2044 IC used in KORG PLYSIX.A simple but effective filter. The circuit diagram is based on HAGIWO's original. I actually manufactured it with JLCPCB and assembled it, and it works.

!! Note !!

  • For the v2044 IC chip itself, I used the Coolaudio reissue version.

  • The v2044 package is SOP16, and only this part requires surface mount technology. (Might be easier than you think!)

  • See HAGIWO's original schematic for details.

  • I will get feedback and improve it.

CHORD VCO

  • This is a PCB version of the CHORD VCO designed by HAGIWO. I actually manufactured it with JLCPCB and assembled it, and it works.

  • The output is designed with Vp-p=4V, so you may feel that the volume is lower than other modules on the market. This is as designed by HAGIWO.

  • There is no control board in this project. The hardware should be mounted and wired to the panel. See HAGIWO's original schematic for details.

  • See the HAGIWO website for the Arduino code.

4chSampler

  • It was manufactured with jlcPCB and actually worked fine. However, there are a few problems such as unconnected GND and misplaced pcb's mounting holes.

  • The output is designed with Vp-p=4V, so you may feel that the volume is lower than other modules on the market. This is as designed by HAGIWO.

  • Since I used a momentary switch (tact switch) for the switch, I modified the HAGIWO code slightly. Please check the .ino file in my repository.

[LINK]
HAGIWO/ハギヲ| note
HAGIWO's Youtube channnel

This repository is made public with permission from HAGIWO itself. It really appreciate it.


CC BY-SA

Parts

37
QtyValueFootprintReferences
6BAT43Diodes_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4, D5, D6, D7, D8
5470RResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR3, R4, R6, R7, R9
3330RResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR10, R11, R12
20.01uFCapacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC3, C4
23.3kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR1, R2
2BAT34Diodes_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2
2MountingHole_3.2mm_M3Mounting_Holes:MountingHole_3.2mm_M3REF1, REF2
1100kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR8
11uFCapacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
1220pFCapacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
1680kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR5
1Arduino_Nano_v3.xArduino:Arduino_NanoA1
1CV-INdigikey-footprints:PinHeader_1x2_P2.54mmJ2
1LED_RGBCdigikey-footprints:PinHeader_1x4_P2.5mm_Drill1.1mmD9
1MCP4726digikey-footprints:SOT-23-6U1
1OUTdigikey-footprints:PinHeader_1x2_P2.54mmJ1
1POWERConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ0
1Rotary_Encoderdigikey-footprints:PinHeader_1x3_P2.54_Drill1.1mmSW1
1SLIDEdigikey-footprints:PinHeader_1x3_P2.54_Drill1.1mmRV1
1SLIDE INdigikey-footprints:PinHeader_1x2_P2.54mmJ4
1SLIDE SWdigikey-footprints:PinHeader_1x3_P2.54_Drill1.1mmSW2
1TRIG OUTdigikey-footprints:PinHeader_1x2_P2.54mmJ3

More from ijnekenamay/HAGIWOs_Module

11
  • 2 layers30 × 100 mmCHORD VCO, the printed circuit board in 3D

    CHORD VCO

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    42 parts143
  • 2 layers60 × 100 mmKICK, the printed circuit board in 3D

    KICK

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    41 parts143
  • 2 layers30 × 105 mmMultiClockDiv, the printed circuit board in 3D

    MultiClockDiv

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    36 parts143
  • 2 layers30 × 100 mm4ch Sampler main, the printed circuit board in 3D

    4ch Sampler main

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    33 parts143
  • 2 layers29 × 99.5 mmSampler, the printed circuit board in 3D

    Sampler

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    33 parts143
  • 2 layers30 × 99 mm6ch Sequencer, the printed circuit board in 3D

    6ch Sequencer

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    32 parts143
  • 2 layers30 × 100 mm2044vcf, the printed circuit board in 3D

    2044vcf

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    31 parts143
  • 2 layers30 × 100 mmKICK, the printed circuit board in 3D

    KICK

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    30 parts143
  • 2 layers30 × 100 mm4ch Sampler comtrol, the printed circuit board in 3D

    4ch Sampler comtrol

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    18 parts143
  • 2 layers30 × 100 mm2044vcf control, the printed circuit board in 3D

    2044vcf control

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    16 parts143
  • 2 layers30 × 99 mm6ch Sequencer control, the printed circuit board in 3D

    6ch Sequencer control

    ijnekenamay/HAGIWOs_Module

    eurorack modular synthesizers projects using Arduino.

    14 parts143

Similar boards

  • 4 layers120 × 113 mmVoron Klipper Board, the printed circuit board in 3D

    Voron Klipper Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    360 parts1.1kGPL-3.0
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers54 × 64 mmDonConIOmini, the printed circuit board in 3D

    DonConIOmini

    ravinrabbid/DonCon2040

    RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

    96 parts66MIT
  • 2 layers19.7 × 99.1 mmMain pcb, the printed circuit board in 3D

    Main pcb

    Testbild-synth/HAGIWO_arduino_oscillator

    4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.

    40 parts57MIT
  • 2 layers29 × 99.8 mmMain pcb, the printed circuit board in 3D

    Main pcb

    Testbild-synth/Hagiwo_009_030_sequencer

    A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.

    26 parts49MIT
  • 2 layers63 × 46 mmPi485, the printed circuit board in 3D

    Pi485

    bvarner/pi485

    An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

    31 parts41MIT
  • 2 layers29 × 99 mmControl pcb v1 1, the printed circuit board in 3D

    Control pcb v1 1

    Testbild-synth/HAGIWO-029-033-Eurorack-quantizer

    Through hole PCB version of the HAGIWO Dual Quantizer/SH101 Sequencer Eurorack Module-.

    30 parts40MIT
  • 2 layers28 × 99 mmMain pcb v1 1, the printed circuit board in 3D

    Main pcb v1 1

    Testbild-synth/HAGIWO-005-Eurorack-sequencer

    Through hole PCB version of the HAGIWO 005 Generative Sequencer Eurorack module.

    25 parts33

Questions

How big is the Quantizer PCB?

It measures 30 × 99 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Quantizer use?

37 parts, built around the BAT43. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Quantizer KiCad files?

From the ijnekenamay/HAGIWOs_Module repository on GitHub, at the commit this page was made from: the board is Quantizer/Quantizer_main/Quantizer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Quantizer design in my own project?

Its repository states no licence, so its author keeps all rights: ask ijnekenamay before reusing the design.