

OhmSprint V1
A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output — all on a compact 2-layer PCB within a sub-€50 BOM.
- Size
- 84.4 × 68.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 96
- Pads
- 277
- Tracks, vias
- 564, 254
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Jun 2026
- Updated
- 2 Jun 2026
Overview
OhmSprint V1 is an open-source printed circuit board by Ignjat02, from the Ignjat02/Energy-meter-PCB repository on GitHub. It is a 2-layer board of 84.4 × 68.9 mm with 70 parts on 96 nets, routed with 564 tracks and 254 vias.
It is built around the BM70BLES1FC2-0B03AA, AP2213M-3.3TRG1 and ATM90E26-YU-R, with the USBLC6-2SC6, PJ-002AH-SMT-TR and SJ-3523-SMT-TR among its other parts. Its parts include 27 capacitors, 19 resistors, 5 ICs, 5 diodes and 5 switches. It belongs with the radio and wireless and sensors and measurement boards and the STM32 boards of this library.
Main components
7BM70BLES1FC2-0B03AA
SMD0dBm Encryption function SPI、UART、I2C SMD Bluetooth Modules ROHSMicrochip TechnologyBluetooth ModulesAP2213M-3.3TRG1
SOIC-8-40℃~+125℃@(Tj) 1 18V 1uA 3.3V 350mV@(500mA) 500mA 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsATM90E26-YU-R
SSOP-28-208mil-40℃~+85℃ 0.1% 1 15ppm/℃ 2.8V~3.6V 5000:1 8.192MHz Pulse output、Interrupt control、Anti-tamper detection、Digital calibration and compensation、Programmable gain、Built-in reference source、Energy accumulation engine SPI、UART Single-Phase Energy Metering IC SSOP-28-208mil Energy Metering ROHSMicrochip TechnologyEnergy MeteringUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)PJ-002AH-SMT-TR
SMD-25℃~+85℃ 24V 2mm 5A 6.5mm DC Power Jack SMD DC Power Connectors ROHSCUIDC Power ConnectorsSJ-3523-SMT-TR
SMD-25℃~+85℃ 12V 19mm 1A 3.5mm Headphone Jack 5mm 9mm Black Brass、Copper alloy Silver Surface Mount TRS SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdEnergy Meter PCB — OhmSprint 2026
A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output — all on a compact 2-layer PCB within a sub-€50 BOM.
Block Diagram
AC Mains
│
├──► [SCT013 Current Transformer] ──► Analog front-end ──► ATM90E26
│ │
└──► [Voltage divider / transformer input] ───────────────────┘
│ SPI
STM32F373C8Tx
│ UART
BH70BLE5LFC2 (BT)Hardware Overview
Key ICs
| Component | Role |
|---|---|
| STM32F373C8Tx | Main MCU — SPI master, UART, peripheral control |
| ATM90E26 | Single-phase energy metering IC — active/reactive power, RMS voltage/current, frequency |
| BH70BLE5LFC2-DB03AA | Bluetooth LE module — serial data output |
| AP7380 / MIC5219 | LDOs — 3.3V digital and 3.3V analog rails |
| 1N4007 | Input rectifier diode for voltage rail reduction |
Sensing
- Current: SCT013 non-invasive current transformer connected via a 2-pin JST connector (J2) with a burden resistor network (R2, R3) and biasing to mid-supply
- Voltage: Resistive divider on the AC line input (J1) feeding the ATM90E26 voltage channel
Power Supply
- Input from AC mains through a barrel/screw connector
- Series diode (D1, 1N4007) for voltage reduction
- Dual LDO output: 3.3V digital (DVDD) and 3.3V analog (AVDD) with isolated ground planes to reduce ADC noise
- Bulk and decoupling capacitors on both rails
PCB
- 2-layer, 80 × 60 mm
- Designed in KiCad 10
- Isolated analog and digital ground planes under the ATM90E26
- SPI lines kept short between STM32 and ATM90E26
- 4 mounting holes (H1–H4)
Schematic Sections
The schematic is organized into four functional blocks:
- NAPAJANJE — Power supply (AC input, rectifier, LDOs, decoupling)
- ULAZ STRUJNOG TRANSFORMATORA — SCT013 current transformer input and analog conditioning
- ATM CHIP — ATM90E26 metering IC with SPI interface and reference components
- MCU — STM32F373C8Tx with supporting passives, boot config, and UART/SPI routing
- BT MODULE — BH70BLE5LFC2 Bluetooth LE module connected via UART2
Repository Structure
├── OhmSprint_V1.kicad_sch # Schematic
├── OhmSprint_V1.kicad_pcb # PCB layout
├── OhmSprint_V1.kicad_pro # KiCad project file
├── OhmSprint_V1.kicad_prl # Local project settings
├── Gerber files/ # Manufacturing outputs
├── Drill files/ # Drill/excellon files
├── Footprints/ # Custom footprints
├── Symbols/ # Custom schematic symbols
└── 3D_models/ # 3D component modelsTools
- KiCad 10 — schematic capture and PCB layout
- OhmSprint Competition — Apr 2026 – May 2026, Belgrade
Status
PCB design complete. Firmware development in progress (STM32 HAL, SPI communication with ATM90E26).
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | OhmSprint:0.1uF_Cap | C7, C9, C10, C12, C13, C16, C17, C18, C23, C27 |
| 5 | 1K | OhmSprint:1K_Resistor | R2, R4, R6, R7, R17 |
| 5 | 1uF | OhmSprint:1uF_Cap | C2, C3, C21, C22, C25 |
| 5 | SW_Nidec_CAS-120A1 | OhmSprint:SW_EG1218 | SW1, SW2, SW3, SW4, SW5 |
| 4 | 33nF | OhmSprint:33nF_Cap | C5, C6, C14, C15 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10uF | OhmSprint:10uF_Cap | C8, C19, C26 |
| 2 | 100uF | OhmSprint:100uF_Polarized_Cap | C1, C4 |
| 2 | 10K | OhmSprint:10K_Resistor | R12, R20 |
| 2 | 22R | OhmSprint:22R_Resistor | R13, R14 |
| 2 | 2R4 | OhmSprint:2R4_Resistor | R1, R3 |
| 2 | 510R | OhmSprint:510R_Resistor | R10, R11 |
| 2 | 5K1 | OhmSprint:5K1_Resistor | R18, R19 |
| 1 | 10K | OhmSprint:1K5_Resistor | R16 |
| 1 | 10nF | OhmSprint:10uF_Cap | C20 |
| 1 | 10nF | OhmSprint:10nF_Cap | C11 |
| 1 | 120R | OhmSprint:FB_LI0805H121R-10 | FB1 |
| 1 | 1K5 | OhmSprint:1K5_Resistor | R15 |
| 1 | 1N4007 | OhmSprint:DIO_N4007-T_DIO | D1 |
| 1 | 220uF | OhmSprint:220uF_Polarized_Cap | C24 |
| 1 | 25K | OhmSprint:25K_Resistor | R8 |
| 1 | 51R | OhmSprint:51R_Resistor | R9 |
| 1 | 8.192MHz | OhmSprint:CRYSTAL-AA-8.192MAGE | Y1 |
| 1 | AP2213M-3.3TRG1 | OhmSprint:AP2213M-3.3TRG1 | U4 |
| 1 | ATM90E26-YU-R | OhmSprint:ATM90E26 | U1 |
| 1 | BM70BLES1FC2-0B03AA | OhmSprint:BM70BLES1FC2_MCH | U5 |
| 1 | PJ-002AH-SMT-TR | OhmSprint:CUI_PJ-002AH-SMT-TR | J1 |
| 1 | SJ-3523-SMT-TR | OhmSprint:CUI_SJ-3523-SMT-TR | J2 |
| 1 | STM32F373CCTx | OhmSprint:STM32F373CCT6 | U2 |
| 1 | USB4105-GF-A | OhmSprint:USB4105_GCT | J3 |
| 1 | USBLC6-2SC6 | OhmSprint:USBLC6-25C6 | U3 |
Similar boards
- 2 layers102 × 103 mm

- 2 layers114.9 × 68.5 mm

OhmPrvaFaza
apantelic/ohmsprint_kicad
Energy measurement system designed in KiCad, including schematic, BOM, and 2-layer PCB layout
50 parts - 2 layers99.4 × 54.2 mm

OhmSprint C V measurement PCB
pakiboj/OhmSprint-C-V-measurement-PCB
Za potrebe projekta izabran je ESP32-C2 mikrokontroler a merenje struje i napona radjeno je preko ATM90E26 mernog cipa. Slanje podataka uradjeno je pomocu WROOM-C2 cipa ugradjenog sa ESP kontrolerom.
88 parts - 2 layers

- 4 layers66 × 117 mm

- 4 layers270 × 56 mm

24 channel esp32 energy meter
overallcoma/project-grayskull
ESP32-based Power Monitoring Solution
352 parts5 - 2 layers161.1 × 85 mm

TurnoutBoss
JimKueneman/TurnoutBoss
This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node
198 parts1 - 2 layers

Pcbgolf
chilly23/PCBGolf-master-Comma.ai
Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.
245 partsMIT
Questions
How big is the OhmSprint V1 PCB?
It measures 84.4 × 68.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OhmSprint V1 use?
70 parts, built around the BM70BLES1FC2-0B03AA, AP2213M-3.3TRG1, ATM90E26-YU-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OhmSprint V1 KiCad files?
From the Ignjat02/Energy-meter-PCB repository on GitHub, at the commit this page was made from: the board is OhmSprint_V1.kicad_pcb and its schematic OhmSprint_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OhmSprint V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ignjat02 before reusing the design.