

Repo made to easily get data from a bbb
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 34
- Pads
- 107
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Oct 2024
- Updated
- 13 Jun 2025
Overview
ADS is an open-source printed circuit board by eemestre, from the eemestre/bbb-data-repo repository on GitHub. It is a 2-layer board with 35 parts on 34 nets.
It is built around the ATM90E26-YU-R. Its parts include 15 resistors, 11 capacitors, 7 connectors, 1 IC and 1 crystal.
Main components
1Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 120k | Resistor_SMD:R_0805_2012Metric | R13, R14, R15, R16, R17, R18, R19 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R6, R10, R11, R20 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C7 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 2.4 | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | 330nF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 33nF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | gnd | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4 |
| 2 | vdd | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 8.192MHz | ECS-40-18-5PXEN-TR:XTAL_ECS-40-18-5PXEN-TR | X1 |
| 1 | ATM90E26-YU-R | ATM90E26-YU-R:SOP65P780X200-28N | U1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x12_Female | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J7 |
| 1 | USEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
More from eemestre/bbb-data-repo
1- 2 layers

Similar boards
- 2 layers102 × 103 mm

- 2 layers114.9 × 68.5 mm

OhmPrvaFaza
apantelic/ohmsprint_kicad
Energy measurement system designed in KiCad, including schematic, BOM, and 2-layer PCB layout
50 parts - 2 layers84.4 × 68.9 mm

OhmSprint V1
Ignjat02/Energy-meter-PCB
A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output —…
70 parts - 2 layers99.4 × 54.2 mm

OhmSprint C V measurement PCB
pakiboj/OhmSprint-C-V-measurement-PCB
Za potrebe projekta izabran je ESP32-C2 mikrokontroler a merenje struje i napona radjeno je preko ATM90E26 mernog cipa. Slanje podataka uradjeno je pomocu WROOM-C2 cipa ugradjenog sa ESP kontrolerom.
88 parts - 2 layers97.2 × 59.1 mm

ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915 - 2 layers62 × 42 mm

- 2 layers75 × 26 mm

DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm

ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0
Questions
What parts does the ADS use?
35 parts, built around the ATM90E26-YU-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADS KiCad files?
From the eemestre/bbb-data-repo repository on GitHub, at the commit this page was made from: the board is EnergyMeter/Board/ADS/ADS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADS design in my own project?
Its repository states no licence, so its author keeps all rights: ask eemestre before reusing the design.