Skip to the content
2 layers84.4 × 68.9 mmOhmSprint V1, the printed circuit board in 3D

A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output — all on a compact 2-layer PCB within a sub-€50 BOM.

Size
84.4 × 68.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
70
Nets
96
Pads
277
Tracks, vias
564, 254
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Jun 2026
Updated
2 Jun 2026

Overview

OhmSprint V1 is an open-source printed circuit board by Ignjat02, from the Ignjat02/Energy-meter-PCB repository on GitHub. It is a 2-layer board of 84.4 × 68.9 mm with 70 parts on 96 nets, routed with 564 tracks and 254 vias.

It is built around the BM70BLES1FC2-0B03AA, AP2213M-3.3TRG1 and ATM90E26-YU-R, with the USBLC6-2SC6, PJ-002AH-SMT-TR and SJ-3523-SMT-TR among its other parts. Its parts include 27 capacitors, 19 resistors, 5 ICs, 5 diodes and 5 switches. It belongs with the radio and wireless and sensors and measurement boards and the STM32 boards of this library.

Main components

7

README

README.md

Energy Meter PCB — OhmSprint 2026

A single-phase energy meter designed and built for the OhmSprint competition (Belgrade, April–May 2026). The board handles AC current sensing, energy measurement, microcontroller processing, and Bluetooth data output — all on a compact 2-layer PCB within a sub-€50 BOM.


Block Diagram

text
AC Mains
   │
   ├──► [SCT013 Current Transformer] ──► Analog front-end ──► ATM90E26
   │                                                               │
   └──► [Voltage divider / transformer input]  ───────────────────┘
                                                                   │ SPI
                                                          STM32F373C8Tx
                                                                   │ UART
                                                         BH70BLE5LFC2 (BT)

Hardware Overview

Key ICs

ComponentRole
STM32F373C8TxMain MCU — SPI master, UART, peripheral control
ATM90E26Single-phase energy metering IC — active/reactive power, RMS voltage/current, frequency
BH70BLE5LFC2-DB03AABluetooth LE module — serial data output
AP7380 / MIC5219LDOs — 3.3V digital and 3.3V analog rails
1N4007Input rectifier diode for voltage rail reduction

Sensing

  • Current: SCT013 non-invasive current transformer connected via a 2-pin JST connector (J2) with a burden resistor network (R2, R3) and biasing to mid-supply
  • Voltage: Resistive divider on the AC line input (J1) feeding the ATM90E26 voltage channel

Power Supply

  • Input from AC mains through a barrel/screw connector
  • Series diode (D1, 1N4007) for voltage reduction
  • Dual LDO output: 3.3V digital (DVDD) and 3.3V analog (AVDD) with isolated ground planes to reduce ADC noise
  • Bulk and decoupling capacitors on both rails

PCB

  • 2-layer, 80 × 60 mm
  • Designed in KiCad 10
  • Isolated analog and digital ground planes under the ATM90E26
  • SPI lines kept short between STM32 and ATM90E26
  • 4 mounting holes (H1–H4)

Schematic Sections

The schematic is organized into four functional blocks:

  • NAPAJANJE — Power supply (AC input, rectifier, LDOs, decoupling)
  • ULAZ STRUJNOG TRANSFORMATORA — SCT013 current transformer input and analog conditioning
  • ATM CHIP — ATM90E26 metering IC with SPI interface and reference components
  • MCU — STM32F373C8Tx with supporting passives, boot config, and UART/SPI routing
  • BT MODULE — BH70BLE5LFC2 Bluetooth LE module connected via UART2

Repository Structure

text
├── OhmSprint_V1.kicad_sch     # Schematic
├── OhmSprint_V1.kicad_pcb     # PCB layout
├── OhmSprint_V1.kicad_pro     # KiCad project file
├── OhmSprint_V1.kicad_prl     # Local project settings
├── Gerber files/              # Manufacturing outputs
├── Drill files/               # Drill/excellon files
├── Footprints/                # Custom footprints
├── Symbols/                   # Custom schematic symbols
└── 3D_models/                 # 3D component models

Tools

  • KiCad 10 — schematic capture and PCB layout
  • OhmSprint Competition — Apr 2026 – May 2026, Belgrade

Status

PCB design complete. Firmware development in progress (STM32 HAL, SPI communication with ATM90E26).

Parts

70
QtyValueFootprintReferences
100.1uFOhmSprint:0.1uF_CapC7, C9, C10, C12, C13, C16, C17, C18, C23, C27
51KOhmSprint:1K_ResistorR2, R4, R6, R7, R17
51uFOhmSprint:1uF_CapC2, C3, C21, C22, C25
5SW_Nidec_CAS-120A1OhmSprint:SW_EG1218SW1, SW2, SW3, SW4, SW5
433nFOhmSprint:33nF_CapC5, C6, C14, C15
4LEDLED_SMD:LED_0805_2012MetricD2, D3, D4, D5
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
310uFOhmSprint:10uF_CapC8, C19, C26
2100uFOhmSprint:100uF_Polarized_CapC1, C4
210KOhmSprint:10K_ResistorR12, R20
222ROhmSprint:22R_ResistorR13, R14
22R4OhmSprint:2R4_ResistorR1, R3
2510ROhmSprint:510R_ResistorR10, R11
25K1OhmSprint:5K1_ResistorR18, R19
110KOhmSprint:1K5_ResistorR16
110nFOhmSprint:10uF_CapC20
110nFOhmSprint:10nF_CapC11
1120ROhmSprint:FB_LI0805H121R-10FB1
11K5OhmSprint:1K5_ResistorR15
11N4007OhmSprint:DIO_N4007-T_DIOD1
1220uFOhmSprint:220uF_Polarized_CapC24
125KOhmSprint:25K_ResistorR8
151ROhmSprint:51R_ResistorR9
18.192MHzOhmSprint:CRYSTAL-AA-8.192MAGEY1
1AP2213M-3.3TRG1OhmSprint:AP2213M-3.3TRG1U4
1ATM90E26-YU-ROhmSprint:ATM90E26U1
1BM70BLES1FC2-0B03AAOhmSprint:BM70BLES1FC2_MCHU5
1PJ-002AH-SMT-TROhmSprint:CUI_PJ-002AH-SMT-TRJ1
1SJ-3523-SMT-TROhmSprint:CUI_SJ-3523-SMT-TRJ2
1STM32F373CCTxOhmSprint:STM32F373CCT6U2
1USB4105-GF-AOhmSprint:USB4105_GCTJ3
1USBLC6-2SC6OhmSprint:USBLC6-25C6U3

Similar boards

  • 2 layers102 × 103 mmOhmsprint, the printed circuit board in 3D

    Ohmsprint

    Jockkoo/Ohmsprint-2026-4Digitalca

    Ohmsprint hackaton 2026. KiCad

    123 parts1
  • 2 layers114.9 × 68.5 mmOhmPrvaFaza, the printed circuit board in 3D

    OhmPrvaFaza

    apantelic/ohmsprint_kicad

    Energy measurement system designed in KiCad, including schematic, BOM, and 2-layer PCB layout

    50 parts
  • 2 layers99.4 × 54.2 mmOhmSprint C V measurement PCB, the printed circuit board in 3D

    OhmSprint C V measurement PCB

    pakiboj/OhmSprint-C-V-measurement-PCB

    Za potrebe projekta izabran je ESP32-C2 mikrokontroler a merenje struje i napona radjeno je preko ATM90E26 mernog cipa. Slanje podataka uradjeno je pomocu WROOM-C2 cipa ugradjenog sa ESP kontrolerom.

    88 parts
  • 2 layersADS, the printed circuit board in 3D

    ADS

    eemestre/bbb-data-repo

    Repo made to easily get data from a bbb

    35 parts
  • 4 layers66 × 117 mmIntegrator, the printed circuit board in 3D

    Integrator

    myklemykle/pocketintegrator-kicad

    Design files for the Pocket Integrator

    100 parts9
  • 2 layers161.1 × 85 mmTurnoutBoss, the printed circuit board in 3D

    TurnoutBoss

    JimKueneman/TurnoutBoss

    This repository contains all the design files, manuals, firmware, production information for the LCC TurnoutBoss Node

    198 parts1
  • 2 layersPcbgolf, the printed circuit board in 3D

    Pcbgolf

    chilly23/PCBGolf-master-Comma.ai

    Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.

    245 partsMIT

Questions

How big is the OhmSprint V1 PCB?

It measures 84.4 × 68.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the OhmSprint V1 use?

70 parts, built around the BM70BLES1FC2-0B03AA, AP2213M-3.3TRG1, ATM90E26-YU-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OhmSprint V1 KiCad files?

From the Ignjat02/Energy-meter-PCB repository on GitHub, at the commit this page was made from: the board is OhmSprint_V1.kicad_pcb and its schematic OhmSprint_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the OhmSprint V1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ignjat02 before reusing the design.