2 layers81.3 × 68.6 mm
P2000m to vga adapter
ifilot/p2000m-video-to-vga-adapter
PICO2-based adapter for converting native P2000M video signal to VGA
37 parts
2 layers81.3 × 68.6 mm
P2000c video to vga adapter
ifilot/p2000c-video-adapterPICO2 based adapter to convert Philips P2000C native video output to VGA and composite PAL
- Size
- 81.3 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 84
- Pads
- 320
- Tracks, vias
- 234, 21
- Pours
- 173
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Aug 2026
- Updated
- 20 Aug 2026
Overview
P2000c video to vga adapter is an open-source printed circuit board by ifilot, from the ifilot/p2000c-video-adapter repository on GitHub. It is a 2-layer board of 81.3 × 68.6 mm with 74 parts on 84 nets, routed with 234 tracks and 21 vias.
It is built around the 74LVC1G14Z, TLV3502AID and BAT54A. Its parts include 34 resistors, 14 capacitors, 9 ICs, 4 diodes and 3 connectors. It belongs with the interfaces and adapters boards and the RP2350 boards of this library.
Main components
3
74LVC1G14Z
SOT-553-40℃~+125℃ 1 1.2V~3.33V 1.65V~5.5V 200uA 32mA 32mA 6.5ns@5V,50pF 74LVC 750mV~2.35V Power shutdown protection、Noise suppression function Push-pull Schmitt trigger SOT-553 Inverters ROHSDiodes IncorporatedInverters
TLV3502AID
SOIC-8-2.75V~-1.35V、1.35V~2.75V -40℃~+125℃ 1.5ns 1mV 2 2.7V~5.5V 2pA 2pA 3.2mA 4.5ns 5.5V 5uV/℃ 6mV 70dB Overvoltage protection Push-pull Rail-to-Rail Input, Rail-to-Rail Output TTL、CMOS SOIC-8 Comparators ROHSTexas InstrumentsComparators
BAT54A
SOT-231 Pair Common Anode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R22, R23, R26, R28 |
| 9 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5, C6, C7, C8, C13, C14 |
| 7 | 74LVC1G14 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1, U2, U3, U6, U7, U8, U9 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R36, R47, R48 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RV1, RV2, RV3, RV4 |
| 4 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C12 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43, R44, R45, R46 |
| 4 | BAT54A | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 1070 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R33, R40 |
| 3 | 2150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R35, R41 |
| 3 | 4300 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R38, R42 |
| 3 | 536 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R31, R39 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R37 |
| 2 | TLV3502AID | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U4, U5 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | PAL | components:RCJ-014 | J7 |
| 1 | PROBE | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | Raspberry Pi Pico2 | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | VGA | vga:VGA | J5 |
Similar boards
- 2 layers83.6 × 68.6 mm
P2000t video to vga adapter
ifilot/p2000t-video-to-vga-adapter
PICO2-based adapter for converting native P2000T video signal to VGA
40 parts - 4 layers70.7 × 53.3 mm
- 2 layers66 × 41.9 mm
Video timing board
Batperson/video_timing_board
Development board to extract timing and subcarrier signals from a PAL or NTSC video source.
45 parts6MIT - 2 layers83.5 × 97.5 mm
TeleprinterHat
MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter
145 parts6 - 2 layers40 × 20 mm
B ANALOG To PWM Converter BRK R1.0
Boardoza/Boardoza_Analog_To_PWM_Converter_Breakout_Board
Hardware-based analog voltage to PWM signal converter breakout board with low-latency discrete analog architecture.
27 partsCC-BY-SA-4.0 - 6 layers160 × 100 mm
Buslab
tombueng/hilprobe
HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.
429 parts - 4 layers110 × 78 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
9 parts2
Questions
How big is the P2000c video to vga adapter PCB?
It measures 81.3 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the P2000c video to vga adapter use?
74 parts, built around the 74LVC1G14Z, TLV3502AID and BAT54A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the P2000c video to vga adapter KiCad files?
From the ifilot/p2000c-video-adapter repository on GitHub, at the commit this page was made from: the board is pcb/p2000c-video-to-vga-adapter.kicad_pcb and its schematic pcb/p2000c-video-to-vga-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the P2000c video to vga adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask ifilot before reusing the design.