
Video timing board
Batperson/video_timing_board
Development board to extract timing and subcarrier signals from a PAL or NTSC video source.

a 2.4 GHz SDR neighbor using 1 bit ADC
Quince is an open-source printed circuit board by greatfet-hardware, from the greatfet-hardware/quince repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 70.7 × 53.3 mm with 115 parts on 154 nets, routed with 535 tracks and 70 vias.
It is built around the TLV3502AID. Its parts include 42 capacitors, 33 resistors, 7 inductors, 6 ICs and 6 connectors. It belongs with the radio and wireless boards of this library.
a 2.4 GHz SDR neighbor for GreatFET using 1-bit ADCs
Quince is a GreatFET neighbor that serves as a Software Defined Radio (SDR) receiver for the 2.4 GHz band using a 1-bit sampling technique. It is intended specifically to enable all-channel Bluetooth monitoring, but it should support additional uses.
Quince features the TLV3502 dual comparator and an RF section based on the AD8347 quadrature demodulator. Synthesis of a 2.4 GHz Local Oscillator (LO) is provided by ADF4360-0. The 1-bit quadrature signals are sampled at 80+ Msps by the SGPIO peripheral on Azalea.
Channelization and demodulation are done in software on the host computer, but it may be necessary to add an FPGA to Quince in order to achieve real-time simultaneous monitoring of all Bluetooth channels. The host software will likely be a rewrite of gr-bluetooth using libbtbb (the core of software for Ubertooth).
The first hardware prototype that achieves proof-of-concept has been assembled. Software work is required before determining what changes are needed in the next hardware revision.
Required KiCad dependency:
https://github.com/greatscottgadgets/gsg-kicad-lib
If you are using git, the preferred way to install gsg-kicad-lib is to use the submodule:
git submodule init && git submodule updateLower cost comparators that may have sufficient bandwidth:
It might be more cost-effective to use a wireless transmitter or transceiver IC to generate the LO, such as:
As an alternative to the comparators (and possibly to the quadrature demodulator as well) we may investigate the use of LVDS input on an FPGA. This would be the preferred solution if an FPGA ends up on the board anyway for channelization.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0 | gsg-modules:0402 | R1, R2, R3, R4, R5, R6, R12, R13, R14, R17, R18, R19, R21, R30, R32 |
| 14 | TestPoint | gsg-modules:TESTPOINT-50MIL | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 |
| 13 | 100nF | gsg-modules:0402 | C1, C11, C12, C13, C19, C20, C25, C27, C30, C31, C33, C35, C41 |
| 10 | 100pF | gsg-modules:0402 | C8, C9, C10, C14, C15, C16, C17, C32, C34, C36 |
| 4 | 100 | gsg-modules:0402 | R7, R11, R20, R25 |
| 4 | 18pF | gsg-modules:0402 | C3, C6, C21, C24 |
| 4 | 1nF | gsg-modules:0402 | C2, C7, C39, C40 |
| 4 | 470nH | gsg-modules:0402 | L1, L3, L5, L7 |
| 4 | 68pF | gsg-modules:0402 | C4, C5, C22, C23 |
| 4 | MOUNTING_HOLE | gsg-modules:HOLE126MIL-COPPER | MH1, MH2, MH3, MH4 |
| 3 | 3k3 | gsg-modules:0402 | R8, R26, R31 |
| 3 | 51 | gsg-modules:0402 | R24, R28, R33 |
| 2 | 10k | gsg-modules:0402 | R15, R23 |
| 2 | 200 | gsg-modules:0402 | R10, R16 |
| 2 | 2k2 | gsg-modules:0402 | R9, R22 |
| 2 | 680nH | gsg-modules:0402 | L2, L6 |
| 2 | C | gsg-modules:0402 | C38, C42 |
| 1 | 1.5k | gsg-modules:0402 | R29 |
| 1 | 10nF | gsg-modules:0402 | C29 |
| 1 | 10uF | gsg-modules:0805 | C37 |
| 1 | 270pF | gsg-modules:0402 | C18 |
| 1 | 3.6nH | gsg-modules:0402 | L4 |
| 1 | 3k | gsg-modules:0402 | R27 |
| 1 | 560pF | gsg-modules:0402 | C28 |
| 1 | 8.2nF | gsg-modules:0402 | C26 |
| 1 | AD8347 | gsg-modules:TSSOP28 | U2 |
| 1 | ADF4360 | gsg-modules:QFN24-4 | U6 |
| 1 | BAND PASS FILTER | gsg-modules:2450BP39D100C | U5 |
| 1 | BONUS_ROW | gsg-modules:HEADER-1x20 | J7 |
| 1 | D_TVS | gsg-modules:0402 | D1 |
| 1 | Ferrite_Bead | gsg-modules:0805 | FB1 |
| 1 | GND | gsg-modules:HEADER-1x2 | J19 |
| 1 | LNA | gsg-modules:BGA7H1N6 | U4 |
| 1 | LO | gsg-modules:SMA-VERTICAL | J8 |
| 1 | NEIGHBOR1 | gsg-modules:HEADER-2x20 | J1 |
| 1 | NEIGHBOR2 | gsg-modules:HEADER-2x20 | J2 |
| 1 | RFIN | gsg-modules:SMA-EDGE | J3 |
| 1 | SAW FILTER | gsg-modules:B9413 | U3 |
| 1 | TCXO | gsg-modules:XTAL5.0x3.2mm | X1 |
| 1 | TLV3502 | gsg-modules:SOIC8-154 | U1 |

Batperson/video_timing_board
Development board to extract timing and subcarrier signals from a PAL or NTSC video source.

MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter

Boardoza/Boardoza_Analog_To_PWM_Converter_Breakout_Board
Hardware-based analog voltage to PWM signal converter breakout board with low-latency discrete analog architecture.

ifilot/p2000c-video-adapter
PICO2 based adapter to convert Philips P2000C native video output to VGA and composite PAL

tombueng/hilprobe
HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.

jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack


WestianPKl/pcb-docs
A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…
It measures 70.7 × 53.3 mm and has 4 copper layers, 1.6 mm thick.
115 parts, built around the TLV3502AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the greatfet-hardware/quince repository on GitHub, at the commit this page was made from: the board is quince.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).